Software Update And Backup - Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual
Managed modular copper and fiber switch
Hide thumbs
Also See for ProSwitch FlexPort- 2600M:
- Installation manual and operating manual (39 pages)
Table of Contents
Advertisement
6.23
Software Update and Backup
This switch supports software configuration backup and update restore functions.
below are the three ways to perform these functions.
1. From console when booting – Use the Xmodem protocol and a terminal program.
This function can be used for run-time code and boot code updating. (Boot code works
only at boot time - before the main program starts.) Follow this procedure:
•
Press Ctrl-C when the switch is booting.
displayed:
Boot Menu
===========================
0: Start the Run-time code
1: Upgrade Run-time code
2: Upgrade Boot Code
=> Select:
•
Press 0 to Start the Run-time code.
process.
•
Press 1 to Upgrade Run-time code. This option will try to update run-time code
(main code) from terminal program with the Xmodem protocol. If this option is
selected, the following message will be shown:
"Waiting to receive file by Xmodem ...."
Next, select Send File from the terminal program. Select Xmodem protocol and
the update file. Start the file upgrade.
•
Press 2 to Upgrade Boot Code. This option will try to update the boot code from
the terminal program with the Xmodem protocol. Select Send File function of
terminal program with the Xmodem protocol. Select the update file and start the
file upgrade.
2. From console/Telnet when running – Use the TFTP protocol with a TFTP server on
the network. Refer to the description of the Upgrade function in the console operation
of this manual.
3. From web browser – Use the web management interface (http protocol). Refer to the
description of the Tools function in Section 6.3.
WATERS NETWORK SYSTEMS™
This option will continue the booting
®
-
ProSwitch
2600M, User's Manual, 02/07
The following message will be
Listed
Page 50
Advertisement
Table of Contents
