Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual page 25
Managed modular copper and fiber switch
Hide thumbs
Also See for ProSwitch FlexPort- 2600M:
- Installation manual and operating manual (39 pages)
Table of Contents
Advertisement
Command
Description
Same as the exit command.
Show subcommand list:
?
Help commands
help
Help command
1qvlan
Displays 802.1q VLAN configuration
age
Displays current aging time
arl
Displays ARL table
Example:
>show arl dynamic
[
Dynamic Address Learning Table]
Item Port
1)
2)
3)
automode
Displays automode will show current
setting for port configuration (either
Auto Negotiation or Auto Detect)
For Auto Negotiation mode, the
switch will do auto-negotiation
ON/OFF when the auto mode of port
is enabled/disabled. Auto-MDIX
function will be disabled when the
auto-negotiation function of port is
OFF.
For Auto Detect mode, the switch
will always keep auto-negotiation
function ON but jmodify its attribution
if the auto mode of port is disabled.
The Auto-MDIX function will be
always enabled in this mode.
For applications, you should select
Auto Detect mode if the connected
device is auto-negotiation enabled.
You can select Auto Negotiation
mode if the connected device is auto-
WATERS NETWORK SYSTEMS™
Mac Address
CPU
00-00-01-64-64-64
8
00-00-e2-82-8c-e6
4
00-20-14-95-0a-32
®
ProSwitch
Syntax
show ?
show help
Example: show 1qvlan [status
|static|table|port]
status: show 802.1q, ingress
filter and GVRP protocol status
static: show static vlan table
content
table: show all vlan table content
port: show the pvid and Priority
for tag of ports
Example: show 1qvlan status
will display:
802.1Q VLAN: Enable
Ingress Filter: Enable
VLAN Mode : SVL
show age
show arl [static|dynamic]
static: shows static MAC
address set in ARL table
dynamic: shows dynamic
MAC address learned in ARL
VID
1(0x001)
table
1(0x001)
1(0x001)
show automode
-
2600M, User's Manual, 02/07
Page 23
Advertisement
Table of Contents
