Snmp - Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual

Managed modular copper and fiber switch

Hide thumbs Also See for ProSwitch FlexPort- 2600M:

Table of Contents

6.18

SNMP

Use this option to configure the SNMP settings. Once SNMP has been configured, you will

be able to manage the switch from an SNMP management program.

1. In the RMON section of the screen choose enable or disable. RMON is disabled by

default.

2. Click Apply

3. Enter the System Information.

4. Click Apply

5. Enter the following information:

•

GET/SET Community Name

•

Trap IP Address and Community Name

6. Click Apply to save the settings.

WATERS NETWORK SYSTEMS™

6.21 – SNMP Settings

ProSwitch

2600M, User's Manual, 02/07

Page 47

Table of Contents