Web Management - Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual
Managed modular copper and fiber switch
Hide thumbs
Also See for ProSwitch FlexPort- 2600M:
- Installation manual and operating manual (39 pages)
Table of Contents
Advertisement
Command
Description
Use this command to determine the
maximum storm rate setting and the
port list controlling the storm control
trunk
Displays trunking configuration
6.0
Web Management
The 2600M switch can be managed via your web browser. You can use the default IP to
connect to the switch for the first time. The default IP address is 192.168.1.5.
You can also connect to the switch via the console using the CLI commands listed in
Section 5.0. Use the show net command to check the default address of the switch. If you
want to change the IP from the CLI commands, use set net ip xxx.xxx.xxx.xxx netmask
xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx to set the IP for your installation.
The default values for the switch are listed below:
Access your web browser, and type in
the address field.
username and password for login authentication. The default username is admin and
password 123456. Click on the Login button. The login process now is completed.
The management home page will be displayed.
WATERS NETWORK SYSTEMS™
IP Address
Subnet Mask
Username
Password
http://192.168.1.5
The login screen will be displayed. (see Table 5-1) requesting the
Figure 6.1 – Management Home Page
ProSwitch
Syntax
show trunk
192.168.1.5
255.255.255.0
admin
123456
Table 6.1
(or the assigned IP address) in
®
-
2600M, User's Manual, 02/07
Page 26
Advertisement
Table of Contents
