System Configuration Page - Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual

Managed modular copper and fiber switch

Hide thumbs Also See for ProSwitch FlexPort- 2600M:

Table of Contents

The left side of the home page is a function list. You can use any of these menu options

for status monitoring or switch configuration.

The top of the screen displays the current link status for the switch. Three colors are used

to show the status of ports: link up, link down and port disable.

The middle of the screen shows the operation for switch configuration based on the

selected function. This is the working area.

6.1

System Configuration Page

The System Configuration is the home page of the switch. (Refer to Figure 6.2 on the

next page) This page lists the firmware version of the switch and the MAC address of the

switch.

The following functions can be configured from this page:

ARL Aging Time – The aging operation of the switch can be enabled, disabled and

modified at this screen. (Default is 300 seconds.)

DHCP / IP Address / Network Mask / Gateway: IP address configuration of the switch

here can be configured here either by DHCP or static settings.

Administrator Configuration: Use these fields to modify user name and password.

Guest Configuration: Use these fields to change the user name and password for the

guest account.

guest account can only see the switch settings and cannot make any changes to the

settings.

If any modifications have been made to the functions listed above, click Apply to activate

the new settings.

WATERS NETWORK SYSTEMS™

The default user name is guest and the password is 123456. The

ProSwitch

2600M, User's Manual, 02/07

Page 27

Table of Contents