Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual page 12

Managed modular copper and fiber switch

Hide thumbs Also See for ProSwitch FlexPort- 2600M:

Table of Contents

8. The initialization screen will look similar to this example:

Booting Program Version 1.05.00, built at 14:44:03, Jul 29 2005

RAM: 0x00000000-0x00800000, 0x0000cc78-0x007f3000 available

FLASH: 0x05800000 - 0x05900000, 16 blocks of 0x00010000 bytes each.

==> enter ^C to abort booting within 3 seconds

Start to run system initialization task

[System Configuration]

Company Name

Model Name

MAC Address

Firmware Version:

Press <ENTER> key to start.

UCD-SNMP version 4.1.2

Logging into the Switch

1. Press Enter.

2. Enter the username and password. The default username is admin and the default

password is 123456.

3. After logging into the switch, a prompt will be displayed. You can use the help or ? to

display a list of commands.

WATERS NETWORK SYSTEMS™

Intelligent Switch

00:00:01:23:45:67

3.02.02 < Mar 13 2006 15:13:36 >

Figure 5.1 – Boot up screen

ProSwitch

2600M, User's Manual, 02/07

Page 10

Table of Contents