802.1Q Vlan Table; 802.1X Configuration - Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual
Managed modular copper and fiber switch
Hide thumbs
Also See for ProSwitch FlexPort- 2600M:
- Installation manual and operating manual (39 pages)
Table of Contents
Advertisement
6.10
802.1Q VLAN Table
The 802.1Q VLAN table will show the activity for the VLAN. Both static and dynamic
802.1Q VLANs will be displayed in the table.
To view the 802.1Q VLANs:
1. Select a VLAN under the Show VLAN Table section.
2. The current activity for the VLANs will be displayed.
Note: If the GVRP protocol is enabled, this table will also display the learned remote
802.1Q VLANs.
6.11
802.1x Configuration
The 802.1x function limits port access for users who can be authenticated. The function
requires a Radius server for the authentication process.
authenticator.
To configure 802.1x function settings:
1. Choose the 802.1x Authentication Status.
•
Enable - enables 802.1x function in authentication mode
•
Disable - disables 802.1x function
•
Transparent – forwards only 802.1x packets
2. Chose the Re-authentication mode. This function will re-authenticate users after the
specified timeout period.
3. Set the Re-authentication Timeout Period.
4. Set the Re-authentication Max Count. The Max Count is the maximum re-try count
between the switch and users before authentication fails.
5. Set the Max Request Count.
6. Set the Server Timeout Period. The Server Timeout Period is the timeout period for
the request between the switch and RADIUS server.
7. Set the Supplicant Timeout Period. This value is the timeout between the switch and
WATERS NETWORK SYSTEMS™
6.12 – 802.1Q VLAN Table
®
-
ProSwitch
2600M, User's Manual, 02/07
The switch acts as the
Page 39
Advertisement
Table of Contents
