Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual page 24
Managed modular copper and fiber switch
Hide thumbs
Also See for ProSwitch FlexPort- 2600M:
- Installation manual and operating manual (39 pages)
Table of Contents
Advertisement
Command
Description
the factory default
del
This command can delete static
entried in the ARL table, delete a
VLAN group and delete a trunk
connection.
find
This command can find a MAC
address in the ARL table
Additional Information: If the MAC
is in the ARL table, the MAC address
will be displayed. If it is not, the
message "This MAC is not existed!"
will be displayed.
Dynamic means the MAC address is
learned and cannot be aged out by
the switch. Static means that the
MAC address is fixed in the ARL
table.
whoami
This command will display the current
login name.
reset
This command is used to reset the
switch.
ping
Use ping to ping another device to
verify network connection and activity.
backup
The switch supports TFTP protocol
for firmware and configuration update
and backup. To use this command,
you must load your TFTP server, and
be ready to provide the IP address of
the TFTP server and the backup
filename for backup operation.
upgrade
This command is used to upgrade the
firmware version and the
configuration using the TFTP protocol
exit
Use this command to logout.
Same as the logout command.
logout
Use this command to logout.
WATERS NETWORK SYSTEMS™
Syntax
Examples:
del 1qvlan - (deletes an 802.1q
VLAN group)
del arl – deletes a MAC address
from ARL table
del pvlan – deletes a port-based
VLAN group
del trunk – deletes a trunk
connection
find arl
backup [firmware | config] ip
filename
Example:
backup config 192.168.1.80
abcd will backup the
configuration to the TFTP server
192.168.1.80 and the filename
will be abcd.
upgrade [firmware | config] ip
filename
ip is the IP address of TFTP
server.
filename is the upgrade file name
in the TFTP server.
Example:
upgrade config 192.168.1.80
abcd command will load file
"abcd" from TFTP server
192.168.1.80 as its configuration
setting.
®
-
ProSwitch
2600M, User's Manual, 02/07
Page 22
Advertisement
Table of Contents
