Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual page 13
Managed modular copper and fiber switch
Hide thumbs
Also See for ProSwitch FlexPort- 2600M:
- Installation manual and operating manual (39 pages)
Table of Contents
Advertisement
The following table lists the CLI commands and descriptions.
Command
Description
Help Commands (use ? to display Help Commands)
help
Help commands
set
Set commands
show
Show commands
default
Restore to factory default setting
del
Del commands
find
Find commands
whoami
Display current login user name
reset
Reset system
ping
Ping a specified host with IP address
backup
Backup run-time firmware of
configuration
Upgrade
Upgrade run-time firmware or
configuration file
exit
Logout
logout
Logout
Set Command (enter Set at the prompt to use the sub commands listed below)
help
Help commands
?
Help commands
1qvlan
Set 802.1q VLAN configuration
Additional information:
The enable and disable sub-commands are used to enable/disable 802.1Q VLAN function
of the switch.
The ingressfilter sub-command is used to enable/disable VLAN filtering executed at
ingress port.
Enable: The VLAN filtering function will be executed when a packet is received at the
ingress port. If the ingress port is in the same VLAN of the received packet, this packet will
go to forwarding stage. Otherwise, the packet will be discarded by VLAN filtering at ingress
port.
WATERS NETWORK SYSTEMS™
enable
disable
ingressfilter - Set ingress filter
enable or disable
create - create new 802.1q VLAN
with specified VLAN ID and VLAN
name
modify - Modify the setting of a
802.1q VLAN
pvid – Set the port VLAN ID of
the specified port
mgrpvid – set the port VLAN ID
of the management port
priority – set the priority for tag of
specified port
mode – set the VLAN mode
ProSwitch
Syntax
Set 1qvlan
®
-
2600M, User's Manual, 02/07
Page 11
Advertisement
Table of Contents
