Ingress/Egress Rate Control - Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual

Managed modular copper and fiber switch

Hide thumbs Also See for ProSwitch FlexPort- 2600M:

Table of Contents

6.16

Ingress/Egress Rate Control

The rate control function limits the maximum traffic rate for each physical port. Traffic can

be ingress traffic or egress traffic. The rate control range is 64Kbps ~ 1000Mbps. The

following table describes the rule for the rate control setting.

Maximum Rate

No Limit

64K,128K,192K...1792Kbps 1 ~ 28

2M,3M,4M...100Mbps

104M,112M...1000Mbps

For example, if you want to limit the download traffic rate of Port 3 to 512Kbps, set the

Egress Rate Control of Port 3 to 8 (8=512/64; egress is for download operation and ingress

is for upload operation).

The Packet Drop for Ingress Limit is used for packet dropping operation when ingress

traffic rate exceeds the Ingress Rate Control.

dropped to limit the ingress traffic rate. If it is disabled, the flow control function will be used

to pause the ingress traffic.

WATERS NETWORK SYSTEMS™

Rate Control Number (N) Rule

29 ~ 127

128 ~ 240

Table 6.2

If it is enabled, the extra packets will be

6.19 – Ingress/Egress Rate Control

ProSwitch

2600M, User's Manual, 02/07

0 means no limit.

Rate = N x 64Kbps

Rate = (N-27) x 1Mbps

Rate = (N-115) x 8Mbps

Page 45

Table of Contents