Table of Contents
Advertisement
2.
Disconnect the battery cable from the system board, and then remove the battery (2).
NOTE:
Reverse this procedure to install the battery.
Rear-facing webcamera
Description
Rear-facing webcamera (includes cable)
Before removing the rear-facing webcamera, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Remove the battery (see
Remove the rear-facing webcamera:
1.
Remove the tape(1), and then release the ZIF connector (2) that secures the rear-facing webcamera to
the system board.
16
Chapter 6 Removal and replacement procedures
Be careful not to bend the battery as you lift it.
Back cover on page
Battery on page
14).
15).
Spare part number
793500-001
- Quick Links:
- Docking Charger
Hide quick links:
Advertisement
Table of Contents
