Table of Contents
Related Manuals for HP Slate7 VoiceTab
Summary of Contents for HP Slate7 VoiceTab
- Page 1 HP Slate VoiceTab (in Asia Pacific countries and regions and India) and HP Slate 3G (in the People's Republic of China) Maintenance and Service Guide IMPORTANT! This document is intended for HP authorized service providers only.
- Page 2 By installing, copying, downloading, or otherwise using any software product preinstalled on this tablet, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy...
- Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
- Page 4 Safety warning notice...
-
Page 5: Table Of Contents
Table of contents 1 Product description ......................1 2 External component identification ..................3 3 Illustrated parts catalog ....................4 Locating the product name and serial number ................4 Tablet major components ......................5 Miscellaneous parts ........................6 Sequential part number listing ....................6 4 Removal and replacement preliminary requirements ............ - Page 6 System board ........................23 Front-facing webcamera ......................25 Proximity/ambient light sensor board ..................26 6 Specifications ......................... 27 7 Updating apps, widgets, and the operating system ............28 Factory data reset ........................28 8 Power cord set requirements ..................29 Requirements for all countries ....................
-
Page 7: Product Description
Product description Category Description Product Name HP Slate VoiceTab (in Asia Pacific countries and regions and India) HP Slate 3G (in the People's Republic of China) Processor Marvel® PXA1088 1.20-GHz quad core soldered on-chip (SOC) processor Panel 7.0-in, (1280×800), IPS, liquid crystal display (LCD), air-bond TouchScreen display panel... - Page 8 ● Micro USB 2.0 (supports charging) Power requirements Supports a 4100-mAh, Li-ion battery (non-removable), USB charging battery Supports an HP 10-W, 5V-2A, USB, AC adapter with duck head DC plug and localized cable plug support Operating system Preinstalled: Android 4.2.2...
-
Page 9: External Component Identification
External component identification Item Component Item Component Rear-facing webcamera Front-facing webcamera Micro USB port Microphone Audio-out (headphone)/Audio-in Volume control buttons (2) (microphone) jack Speakers (2) Power button... -
Page 10: Illustrated Parts Catalog
NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Locating the product name and serial number The product name (1) and serial number (2) of your tablet are located on the battery. -
Page 11: Tablet Major Components
Tablet major components Item Component Spare part number Back cover 751302-001 Middle frame (includes antenna transceivers, power/volume button actuator, rear- 751304-001 facing webcamera lens, and speaker gaskets) Battery, 4100-mAh, Li-ion (includes cable and double-sided adhesive) 751312-001 Power/volume button board (includes cable and double-sided adhesive) 751305-001 WiFi antenna board (includes RF antenna cable and double-sided adhesive) 751315-001... -
Page 12: Miscellaneous Parts
744423-005 For use only in the People's Republic of China 744423-006 HP Slate7 VoiceTab equipped with a 7-in., IPS, LCD, TouchScreen display panel, a Marvel 751317-001 PXA1088 1.20-GHz quad core processor, 1.0-GB LP-DDR2 system memory, and a 16.0- GB eMMC solid state drive... - Page 13 WiFi antenna board (includes RF antenna cable and double-sided adhesive) 751316-001 USB extension cable 751317-001 HP Slate7 VoiceTab equipped with a 7-in., IPS, LCD, TouchScreen display panel, a Marvel PXA1088 1.20-GHz quad core processor, 1.0-GB LP-DDR2 system memory, and a 16.0-GB eMMC solid state drive 751657-001...
-
Page 14: Removal And Replacement Preliminary Requirements
Removal and replacement preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Magnetic screw driver ● Phillips P0 screw driver ● Plastic case utility tool ● Torx T5 screw driver Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures. -
Page 15: Grounding Guidelines
Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions. -
Page 16: Packaging And Transporting Guidelines
Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations. -
Page 17: Equipment Guidelines
Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times. -
Page 18: Removal And Replacement Procedures
Removal and replacement procedures NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Tablet component replacement procedures CAUTION: Tablet components described in this chapter should only be accessed by an authorized service provider. - Page 19 CAUTION: Before positioning the tablet with the display panel facing down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel surface. Place the tablet on a flat surface, display panel side down, with the power button and volume buttons facing away from you.
-
Page 20: Middle Frame
Middle frame Description Spare part number Middle frame (includes antenna transceivers, power/volume button actuator, rear-facing 751304-001 webcamera lens, and speaker gaskets) Before removing the middle frame, follow these steps: Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. -
Page 21: Battery
WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement battery provided by HP, or a compatible battery purchased from HP. CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. -
Page 22: Power/Volume Button Board
Remove the battery: Lift up on the front edge of the battery (1) until it detaches from the display panel assembly. (The battery is attached to the display panel assembly with double-sided adhesive.) Remove the battery (2). Reverse this procedure to install the battery. Power/volume button board Description Spare part number... -
Page 23: Rear-Facing Webcamera
Detach the power/volume button board (2) from the display panel assembly. (The power/volume button board is attached to the display panel assembly with double-sided adhesive.) Remove the power/volume button board and cable. Reverse this procedure to install the power/volume button board. Rear-facing webcamera Description Spare part number... -
Page 24: Wifi Antenna Board
Remove the rear-facing webcamera (2) and cable. Reverse this procedure to install the rear-facing webcamera. WiFi antenna board Description Spare part number WiFi antenna board (includes RF antenna cable and double-sided adhesive) 751315-001 Before removing the WiFi antenna board, follow these steps: Turn off the tablet. -
Page 25: Fpc Cable
Detach the WiFi antenna board (3) from the display panel assembly. (The WiFi antenna board is attached to the display panel assembly with double-sided adhesive.) Remove the WiFi antenna board and cable. Reverse this procedure to install the WiFi antenna board. FPC cable Description Spare part number... - Page 26 Remove the FPC cable (4). Reverse this procedure to install the FPC cable. NOTE: When installing the FPC cable, make sure the alignment holes (1) on the main part of the FPC cable engage the alignment pins on the system board. Also, make sure the alignment holes (2) on the end of the FPC cable engage the alignment pins on the display panel assembly.
-
Page 27: Speakers
Speakers NOTE: The speakers are included in the Speaker/Vibrator Module Kit, spare part number 751307-001. This kit includes the left and right speakers, cables, and grommets and the vibrator module and cable. The speakers are also included with the system board spare part kit, spare part number 751300-001. -
Page 28: Vibrator Module
Reverse this procedure to install the speakers. Vibrator module NOTE: The vibrator module is included in the Speaker/Vibrator Module Kit, spare part number 751307-001. This kit includes the vibrator module and cable and the left and right speakers, cables, and grommets. The vibrator module is also included with the system board spare part kit, spare part number 751300-001. -
Page 29: System Board
System board Description Spare part number System board equipped with an AllWinner A31S 1.00-GHz quad core processor, 1.0-GB LP- 754942-001 DDR2 system memory, and an 8.0-GB Nand flash drive Before removing the system board, follow these steps: Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. - Page 30 Detach the speakers (1) and the vibrator module (2) from the display panel assembly. (The speakers and the vibrator module are attached to the display panel assembly with double- sided adhesive.) Remove the six Phillips PM1.35×1.75 broad head screws (1) that secure the system board to the display panel assembly.
-
Page 31: Front-Facing Webcamera
Front-facing webcamera Description Spare part number 2.0-MP front-facing webcamera (includes cable) 751308-001 Before removing the front-facing webcamera, follow these steps: Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. -
Page 32: Proximity/Ambient Light Sensor Board
Proximity/ambient light sensor board Description Spare part number Proximity/ambient light sensor board (includes cable) 751314-001 Before removing the front-facing proximity/ambient light sensor board, follow these steps: Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. -
Page 33: Specifications
100—240 V, 50/60 Hz, 0.3-1.0 A. NOTE: The voice tablet can operate on DC power using an industry-standard micro-A or micro-B USB cable. The HP adapter included with your voice tablet is recommended for charging the voice tablet. -
Page 34: Updating Apps, Widgets, And The Operating System
Go to the QQ App store to download the latest versions of HP and third-party apps and widgets. The QQ App store displays the number of existing applications that you can update. If you want to update the operating system manually, go to http://www.hp.com/support. -
Page 35: Power Cord Set Requirements
Power cord set requirements The wide-range input feature of the tablet permits it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set included with the tablet meets the requirements for use in the country or region where the equipment is purchased. - Page 36 Country/region Accredited agency Applicable note number Germany Italy Japan METI The Netherlands KEMA Norway NEMKO The People's Republic of China South Korea Sweden CEMKO Switzerland Taiwan BSMI The United Kingdom The United States The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
-
Page 37: Recycling
Follow the local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle. -
Page 38: Index
Index middle frame AC adapter, spare part numbers FPC cable removal 14 removal 19 spare part number 5, 6, 14 antenna spare part number 5, 6, 19 model name 1 removal 18 front-facing webcamera spare part number 18 location 3 networking, product description 2 audio, product description 1 removal 25... - Page 39 sensor 1 serviceability 2 vibrator module video 1 removal 22 wireless networking 2 spare part number 5, 6, 22 product name 1 video, product description 1 proximity/ambient light sensor volume control buttons 3 board removal 26 webcamera spare part number 5, 6, 26 removal 17, 25 spare part numbers 5, 6, 17,...