Remove the battery:
1.
Lift up on the front edge of the battery (1) until it detaches from the display panel assembly. (The
battery is attached to the display panel assembly with double-sided adhesive.)
2.
Remove the battery (2).
Reverse this procedure to install the battery.
Power/volume button board
Description
Power/volume button board (includes cable and double-sided adhesive)
Before removing the power/volume button board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Remove the middle frame (see
Remove the power/volume button board:
1.
Release the ZIF connector to which the power/volume button board cable is attached, and then
disconnect the power/volume button board cable (1) from the system board.
16
Chapter 5 Removal and replacement procedures
Back cover on page
12).
Middle frame on page
Spare part number
751305-001
14).