Table of Contents
Advertisement
Installing/Updating Emulator Firmware
If you ordered the HP 64767 80186/8/XL/EA/EB emulator probe and the
HP 64748C emulation control card together, the control card contains the correct
firmware for the HP 64767.
However, if you ordered the HP 64767 and the HP 64748C separately, or if you are
using a HP 64748C that has been used previously with a different emulator probe,
you must download the correct firmware into the emulation control card.
The 80186/8/XL/EA/EB emulator firmware is included with the emulator/analyzer
interface software, and the program that downloads emulator firmware is included
with the HP B1471 64700 Operating Environment product.
(The firmware, and the program that downloads it into the control card, are also
included with the 80186/8/XL/EA/EB emulator probe on an MS-DOS format
floppies. The floppies are for users that do not have hosted interface software.)
Before you can update emulator firmware, you must have already installed the
emulator into the HP 64700, connected the HP 64700 to a host computer or LAN,
and installed the emulator/analyzer interface and HP B1471 software as described
in the "Installation" chapter.
This chapter describes how to:
•
•
540
Update firmware with the "progflash" command.
Display current firmware version information.
Advertisement
Table of Contents
