Performing Basic Management Activities; Performing Advanced Management Activities; File Transfer, Reboot, Logout And Save Setting; Using Telnet - Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual
Managed modular copper and fiber switch
Hide thumbs
Also See for ProSwitch FlexPort- 2600M:
- Installation manual and operating manual (55 pages)
Table of Contents
Advertisement
Performing Basic Management Activities
You can perform basic configuration/management with the Basic Setup button on the homepage. This function
is very similar to the Basic Management function in the console interface. Refer to Section 5.2 for the details
of basic management.
Performing Advanced Management Activities
You can perform advanced configuration/management with the Advanced Setup button on the homepage.
This function is very similar to the Advanced Management function in the console interface. Refer to Section
6.0 for advanced management details.
File Transfer, Reboot, Logout and Save Setting
All of these functions can be done from the File button. Complete the operation step by step in the web-
browser. These functions are very similar to those in the console interface. Refer to Section 7.0 for the details
of these functions.
9.0
Using Telnet
The 2600M provides access to the switch through Telnet for configuration/ management purposes. Once the IP
address of the switch has been assigned through the console interface, you can connect to the switch with
Telnet from any workstation on your LAN. Refer to the section: Using DHCP to Set the IP Address of the
Switch.
The management functions will look the same and operate the same as they did from the Console screen. You
must have your password to log into the switch.
1.
Click on Start. - Run.
2.
Type cmd and click ok.
3.
Type telnet and press Enter.
4.
Type open and the IP address of the switch.
5.
Press Enter.
6.
You must login with the user ID and password.
7.
When you are finished using the management functions, logout from the Switch Management menu.
8.
Once you have logged out, you will return to the Command screen. Type quit to exit Telnet.
9.
Close the window to return to your desktop.
10.0
SNMP and RMON Management
RMON is an abbreviation for the Remote Monitoring MIB (Management Information Base). RMON is a system
defined by the Internet Engineering Task Force (IETF) document RFC1757, which defines how networks can be
monitored remotely.
RMONs typically consist of two components:
The RMON probe - is an intelligent device or software agent that continually collects statistics about a LAN
segment or VLAN. The RMON probe transfers the collected data to a management workstation on request
or when a predefined threshold is reached.
The management workstation - collects the statistics that the RMON probe gathers. The workstation can
reside on the same network as the probe, or it can have an in-band or out-of-band connection to the probe.
The 2600M provides RMON capabilities that allow network administrators to set parameters and view statistical
counters defined in MIB-II, Bridge MIB, and RMON MIB. RMON activities are performed at a Network
Management Station running an SNMP network management application with graphical user interface.
WATERS NETWORK SYSTEMS
®
™
ProSwitch
-
2600M User's Manual
Page 31
Advertisement
Table of Contents
