Deleting Ports From A Vlan; Assigning Pvid; Ip Multicast Group Perspective - Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual
Managed modular copper and fiber switch
Hide thumbs
Also See for ProSwitch FlexPort- 2600M:
- Installation manual and operating manual (55 pages)
Table of Contents
Advertisement
6. Select VLAN Settings.
7. To add a port , press + (the plus key).
8. Select Tagged or Untagged.
9. Select the port number.
10. Repeat these steps to add additional ports.
11. Press Esc to return to the desired menu.
Deleting Ports from a VLAN
1.
From the Switch Management Menu, select Advanced Management.
2.
Select L2 Switching DataBase.
3.
Access the VLAN & PVID Perspective menu.
4.
Select VLAN Settings.
5.
Highlight an existing VLAN and press Enter.
6.
Select VLAN Settings.
7.
To delete a port, highlight the port and press – (the minus key).
8.
Repeat Step 5 to remove additional ports from the VLAN.
Assigning PVID
1.
From the Switch Management Menu, select Advanced Management.
2.
Select L2 Switching DataBase.
3.
Access the VLAN & PVID Perspective menu.
4.
Select PVID Settings.
5.
Select the appropriate port number and press Enter.
6.
Enter the PVID.
7.
Press Esc when finished.
Note: Because there is no VLAN information in untagged packets for untagged ports, you can assign a VLAN
ID to untagged ports with this function. It is not necessary for tagged ports, because there is already VLAN
information in the packets. (Tagged ports only for tagged network devices only. Don't use tagged ports for
untagged devices.)
IP Multicast Group Perspective
The IP multicast group perspective provides information associated with an IP multicast group. To obtain this
information:
1.
Select L2 Switching DataBase from the Advanced Management menu.
2.
Select IP Multicast Group Perspective and press Enter.
Note: If the IGMP protocol is disabled, a message will be displayed that says "IGMP Currently Disabled." To
enable IGMP:
a.
Return to the Advanced Management menu.
b.
Select Other Protocols.
c.
Press Enter for IGMP.
d.
Select IGMP and press Enter.
e.
Press Enter.
WATERS NETWORK SYSTEMS
®
™
ProSwitch
-
2600M User's Manual
Page 14
Advertisement
Table of Contents
