System Management; 5.4 Configuring The Lan Ports; Speed And Flow Control - Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual
Managed modular copper and fiber switch
Hide thumbs
Also See for ProSwitch FlexPort- 2600M:
- Installation manual and operating manual (55 pages)
Table of Contents
Advertisement
Configuration of LAN ports
Configuration of console port
Learn MAC address of switch
5.3
System Management
1.
Login to the 2600M switch.
2.
Select Basic Management.
3.
The following menu will be displayed:
4.
Select General.
5.
The General Menu screen will display the current information about the 2600M switch. You can set or
modify the:
System Name
Location of the switch
Administrator's and guest password
6.
The following tasks can also be performed from this menu: (These tasks are all enabled by default.)
Statistics Collection – Collects information about the operation of the switch
Reboot-On-Error – If this option is enabled, the switch will automatically reset if a fatal error is
detected.
Telnet Login – Enable or disable remote Telnet logins to the switch.
Remote HTTP Login – Enable or disable remote HTTP login to the switch.
Note: All of the options are enabled by default.
7.
Use the Esc key to return to the Basic Management Menu.
Changing the Password
Before you can enter a new password, you must enter the old password. You will be asked to re-type the new
password to confirm that you have entered the password correctly. The system will confirm the password and
the "Password Changed" message will be displayed.
You may also use this menu to change the "guest password."
5.4 Configuring the LAN Ports
This management function allows you to configure speed and flow control, link type and physical address. You
can change the connection configuration on each port of the switch with this option.
Speed and Flow Control
1.
Access the Basic Management Menu.
WATERS NETWORK SYSTEMS
®
™
ProSwitch
-
2600M User's Manual
Page 10
Advertisement
Table of Contents
