Assigning An Ip Address; Logging Into The Management Functions; Using The Management Functions - Waters Network Systems ProSwitch FlexPort- 2600M Installation Manual And Operating Manual

Managed modular copper and fiber switch

Hide thumbs Also See for ProSwitch FlexPort- 2600M:

Table of Contents

Web Browser interface

Telnet program

This management method lets you monitor statistical counters and set switch parameters from the remote

Network Management Station. Using this management method:

The network must run the IP protocol.

The Intelligent Switch must have an IP address

Assigning an IP Address

To manage the 2600M remotely through the console port or with an SNMP Management Station, you must

assign an IP address to the switch. The IP address is assigned through the IP Settings screen. This procedure

is described in IP Networking in Section 6.0. Use the Advanced Management function in the Local Console

Management interface to set the IP address.

(VLAN ID = 1) for Remote Console Management and SNMP Network Management.

Once a CMI session has begun, the login screen should be displayed. You will be required to enter a valid

username and password combination to gain access to the menu functions through the CMI. The following are

the two predefined user names and passwords created by default:

Password – 123456

Once you have logged in, you can change this password.

5.0

Navigation through the console menu options is very simple. Notice the menu options listed at the bottom of the

screen.

The UP Arrow and Down Arrow are used to move the highlight the menu option. Enter is used to select the

menu. The menu keys will always be listed at the bottom of the screen as you use the Management options.

So depending on the option you are configuring, different menu keys will be available.

Some terminal programs will not work with the arrow keys. If your arrow keys do not move the cursor through

the management menus, use the K key for the up arrow and the J key for the down arrow.

WATERS NETWORK SYSTEMS

We recommend you assign an IP address to the default VLAN

™

ProSwitch

2600M User's Manual

Page

Table of Contents