Canon imageRUNNER ADVANCE DX C5870i Service Manual page 561
Hide thumbs
Also See for imageRUNNER ADVANCE DX C5870i:
- Faq manual (100 pages) ,
- Manual (96 pages) ,
- Faq manual (48 pages)
Table of Contents
Advertisement
E565-0002-02
Detection Description
Remedy
E565-0003-02
Detection Description
Remedy
E577-0002-02
Detection Description
Remedy
Error in the Fold-enhancing Motor (Paper Folding Unit)
The Fold-enhancing HP Sensor does not detect the fold-enhancing unit when the Fold-enhancing
Motor has been driven for 0.6 second.
[Related parts]
PAPER FOLDING UNIT
- Harnesses from the Fold-enhancing HP Sensor (PS3) to the Paper Folding Unit Controller PCB
- Harnesses from the Fold-enhancing Motor (M4) to the Paper Folding Unit Controller PCB
- Fold-enhancing HP Sensor (PS3)
- Fold-enhancing Motor (M4)
- Paper Folding Unit Controller PCB (PCB1)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] When replacing the Paper Folding Unit Controller PCB, refer to "Adjustment> When
Replacing the Parts" in the Service Manual.
Error in the Fold-enhancing Motor (Paper Folding Unit)
The lock signal is detected for the specified period of time while the Fold-enhancing operates.
[Related parts]
PAPER FOLDING UNIT
- Harnesses from the Fold-enhancing Motor Clock Sensor (PS4) to the Paper Folding Unit
Controller PCB
- Harnesses from the Fold-enhancing Motor (M4) to the Paper Folding Unit Controller PCB
- Fold-enhancing Motor Clock Sensor (PS4)
- Fold-enhancing Motor (M4)
- Paper Folding Unit Controller PCB (PCB1)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] When replacing the Paper Folding Unit Controller PCB, refer to "Adjustment> When
Replacing the Parts" in the Service Manual.
Paddle Motor error (Finisher-L)
- The Paddle HP Sensor was not turned ON although 1 second had passed after the Paddle Motor
operation started.
- The last paddle operation is not finished when driving the Paddle Motor.
[Related parts]
INNER FIN-L
- Harnesses and connectors from the Finisher Controller PCB to the Paddle HP Sensor
- Harnesses and connectors from the Finisher Controller PCB to the Paddle Motor
- Paddle HP Sensor (PS2)
- Paddle Motor (M10)
- Finisher Controller PCB (PCB1)
[Remedy] Check/replace the corresponding harnesses/cables or connectors or the parts.
[Reference] When replacing the Finisher Controller PCB, refer to "Adjustment> Adjustment when
Replacing the Parts" in the Service Manual.
549
8. Error/Jam/Alarm
- Quick Links:
- Table of Contents
- Paper Feed/Output Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
