Table of Contents
Advertisement
3.
To remove the display panel:
a.
The display panel is secured to the display back cover with tape that is installed under the left
and right sides of the panel (1). To remove the panel, use tweezers to grasp the end of the tape
(2). While turning the tweezers, wrap the tape around the tweezers as you continue to pull the
tape out (3) from behind the display panel. You must pull the tape multiple times before it is
completely removed.
b.
Rotate the display panel over and place it next to the display back cover.
Display panels are available as the following spare part numbers:
N96423-001: 300 nits, WUXGA
N96424-001: 300 nits, WUXGA, touch screen
N96421-001: 400 nits, WUXGA
P00439-001: 800 nits, privacy
N14763-001: 1000 nits, privacy, WUXGA
N96422-001: 400 nits, 2.8K, OLED
c.
Lift the tape from the connector on the display panel (1), rotate the locking lever (2), and then
disconnect the cable from the panel (3).
66
Chapter 6 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
