Table of Contents
Advertisement
2.
Pull the battery (2) up and off the computer. The battery is secured with adhesive.
To install the RTC battery, reverse this procedure.
NOTE:
Only replace the battery with a compatible battery type, which for this computer is CR1620.
NFC module
To remove the NFC module, use this procedure and illustration.
Table 6-4
NFC module description and part number
Description
NFC module
NOTE:
The NFC module spare part kit does not include the antenna. The antenna is included in the
touchpad spare part kit.
NFC module cable (included in Cable Kit)
Before removing the NFC module, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the NFC module:
1.
Remove the protective tape (1) that covers the module. Reuse the tape during replacement.
2.
Disconnect the system board cable from the ZIF connector (2) on the top of the NFC module.
3.
Disconnect the touchpad antenna cable from the ZIF connector (3) on the bottom of the NFC
module.
52
Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
48).
37).
Spare part number
M08706-001
N08556-001
37).
Advertisement
Table of Contents
