Table of Contents
Advertisement
•
A total of four or eight IP addresses can be defined depending upon the number of ports.
•
A virtual IP address is configured.
•
The client must be enabled with multipathing so that it knows that the same disk is accessible from
multiple paths.
•
An iSCSI session from each initiator IP to the virtual IP address used by the StoreVirtual storage system
must be created.
iSCSI multipathing without DSM or MEM
•
Access the SVMC to configure StoreVirtual networking. See the StoreVirtual Management Console Online
Help for more information.
Each controller has a pair of physical network interfaces that are bonded together.
•
Two IP addresses are assigned to the bond for optimal performance.
•
A total of four or eight IP addresses can be defined depending upon the number of ports.
•
A virtual IP address can be configured.
•
The client must be enabled with multipathing so that it knows that the same disk is accessible from
multiple paths.
•
An iSCSI session from each initiator IP to each of the four or eight IPs used by the StoreVirtual storage
system must be created.
iSCSI multipathing without DSM or MEM
41
Hide quick links:
Advertisement
Table of Contents
