Table of Contents
Advertisement
Remove the vibrator module:
1.
Unsolder the vibrator module cables (1) from the system board.
NOTE:
terminal. The vibrator module black cable is soldered to the system board "-" vibrator module
terminal.
2.
Detach the vibrator module (2) from the display panel assembly. (The vibrator module is attached
to the display panel assembly with double-sided adhesive.)
3.
Remove the vibrator module and cable.
Reverse this procedure to install the vibrator module.
Receiver module
Description
Receiver module (includes cable and double-sided adhesive)
Before removing the receiver module, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the SIM slot cover (see
5.
Remove the back cover (see
22
Chapter 5 Removal and replacement procedures
The vibrator module red cable is soldered to the system board "+" vibrator module
SIM slot cover on page
Back cover on page
13).
14).
Spare part number
782202-001
Advertisement
Table of Contents
