Table of Contents
Advertisement
Control Operator's Reference Manual
Dial Without Click
Dial Without Click Enable
Dial Without Click Disable
Purpose
These commands determine whether the user must "click" his microphone
button to initiate dialing of Autopatch and User Loadable Autodialer calls.
Remarks
Activating the Autopatch and User Loadable Autodialer can require the user to
click his microphone switch at a pause
in
the controller's readback of his
command. This allows the user to select whether the controller reads back the
autodiallocation and phone number. It provides a degree of security
in
access to
the patch since it isn't obvious to the uninitiated how to activate the patch.
Full-Duplex Mode
Full-Duplex Enable
Full-Duplex Always On
Purpose
These commands cause the patch to be user selectable as full-duplex or to always
operate full-duplex.
Remarks
Telephone audio during a patch nonnally is muted while the mobile is
transmitting (half-duplex). This allows the mobile to immediately block
inappropriate remarks made by the party on the phone by simply keying his
microphone.
In the Full-Duplex Mode, however, phone audio is not muted while the mobile
transmits. This allows users with a full-duplex radiO or a pair of ordinary
transceivers to make patches allowing them to talk and listen at the same time.
I
OOUlW
I
The activity timer is disabled in the Full-Duplex Mode.
When Full-Duplex Always On is selected, the user may specify half-duplex for a
particular call, by entering the User level "Duplex" command. Following that call.
the controller returns to Full-Duplex Mode for future calls.
Long Distance
Primary Autopatch Long Distance Enable/Disable
Secondary Autopatch Long Distance Enable/Disable
Tertiary Autopatch Long Distance
E~able/Disable
(Access and Command Modes)
2-17
8/87 V3
Advertisement
Table of Contents
