Table of Contents
Advertisement
Control Operator's Reference Manual
The memories might typically be cleared periodically and may be done manually
~
with the Control Operator level command. and by scheduler events.
Channels 33-64 store the high values of measurement channels 1-32 (high
memoty
=
channel + 32). Channels 65-80 store the low values of channels 1-16
now memoty
=
channel + 64). Internal telemetry channels 25-29 may be cleared
by specifying channels 57-61 respectively.
Telephone Command Channel Timer Extend
Purpose
To extend the safety timer by two minutes when controlling from the telephone.
Remarks
The telephone timer is automatically extended by any valid Control Op level
command. This command is also available specifically for that purpose.
The timer protects a Control Op from being accidentally disconnected from the
controller. which would otherwise require someone to press the controller's
reset button.
Example
You've called the repeater on the telephone and are listening to the repeater
receiver. Periodically. you enter the Timer Extend command to prevent the
controller from hanging up.
Courtesy Tone Selection
Select Courtesy Tone
#
1
Select Courtesy Tone #2
Select Courtesy Tone #3
Select Courtesy Tone #4
Select Courtesy Tone #5
Select Gourtesy Tone #6
Select Courtesy Tone #7
Select Courtesy Tone #8
Deselect Courtesy Tone
Purpose
These commands affect which Courtesy Tone is generated at the end of each user
tranSmission. The Control Op selection is merged with UT hardware input to
determine which tone set is actually used.
(Access and Command Modes)
2-12
8/87
V3
Advertisement
Table of Contents
