Table of Contents
Advertisement
Control Operator's Reference Manual
Example
Bank 0 autodial nun:tbers may be assigned to additional public service agencies,
Control Operator home phone numbers, etc. Banks 1 and 2 may be openly
available to users for storage of numbers of their choice. Bank 0 could be
normally kept locked, while Banks 1 and 2 might be left unlocked.
Remote Bases I Links
Remote Base Enable / Disable
Remote Base / Link 1 Enable
Remote Base / Link 1 Disable
Remote Base /
Unk
2 Enable
Remote Base / Link 2 Disable
Remote Base /
Unk
3 Enable
Remote Base / Link 3 Disable
Remote Base / Link 4 Enable
Remote Base /
Unk
4 Disable
Purpose
These commands enable and disable the controller's Remote Base and Link User
level commands.
Remarks
The remote base and link transceivers can be controlled by User commands.
Users can activate the remotes and links in Receive Only or Receive/Transmit
modes and can change frequencies of the remotes. A Control Operator can
disable the remotes and links with these commands.
When disabled, command entry from the links is disabled.
These commands do not disable the link transmitters for remote phone line
access and paging.
Example
We can disable the remotes at night with these commands.
Repeater Timers
• Repeater Activity Timer Enable / Disable
• Timeout Timer Clear
• Timeout Timer Enable / Disable
• Timeout Timer Select
Repeater Activity Timer Enable/Disable
Repeater Activity Timer Enable
(Access and Command Modes)
2- 23
8/87
V3
Advertisement
Table of Contents
