USB board
Description
USB board
Before removing the USB board, remove the following components:
1.
Battery (see
2.
Service access cover (see
3.
Hard drive (see
4.
Optical drive (see
5.
Keyboard (see
6.
Top cover (see
Remove the USB board:
1.
Position the computer right-side up, with the right side toward you.
2.
Release the clips (1) that secure the USB board to the base enclosure.
3.
Lift the USB board (2) straight up to remove it from the computer.
Reverse this procedure to install the USB board.
56
Chapter 4 Removal and replacement procedures
Battery on page
37)
Service access cover on page
Hard drive on page
Optical drive on page
Keyboard on page
47)
Top cover on page
49)
38)
39)
41)
Spare part number
640883-001