Table of Contents
Advertisement
3.
Remove the audio jack (3) from the computer.
To install the audio jack, reverse this procedure.
USB board
To remove the USB board, use this procedure and illustration.
Table 6-8
USB board description and part number
Description
USB board
USB board cable (included in the Cable Kit)
USB board plastic bracket (included in the Plastic Kit)
USB board metal bracket and SIM tray (included in the Bracket Kit)
SIM card slot blank insert (included in the Plastic Kit)
Before removing the USB board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the USB board:
1.
If the computer has a SIM card slot, remove the SIM card holder from the slot.
The SIM card slot blank insert is included in the Plastics Kit, spare part number N08530-001.
2.
Remove the two Phillips M2.0 × 4.0 screws (1) that secure the top plastic bracket to the computer,
and then remove the plastic bracket (2).
3.
Remove the Phillips M2.0 × 4.0 screw (3) that secures the metal bracket to the computer, and then
remove the metal bracket (4).
Preparation for disassembly on page
Bottom cover on page
37).
Spare part number
N94621-001
N09040-001
N09031-001
N94626-001
N09031-001
Battery on page
48).
37).
USB board
55
Advertisement
Table of Contents
