hit counter code

HP EliteBook 840 G11 Maintenance And Service Manual page 68

14 inch notebook pc
Table of Contents

Advertisement

Remove the system board:
1.
Disconnect the following cables from the system board:
NOTE:
Display cable (ZIF) (1)
Antenna cables from the WLAN module (select products only) (2)
Display cable from the clips (3)
Speaker cable (4)
Keyboard cable (ZIF) (5)
Card reader cable (ZIF) (6) (select products only)
Touchpad cable (ZIF) (7)
Keyboard backlight cable (ZIF) (8) (select products only)
NFC cable (ZIF) (9) (select products only)
Fingerprint reader cable (ZIF) (10) (select products only)
Speaker cable (11)
Camera cable (ZIF) (12)
USB board cable (ZIF) (13)
Antenna cables from the WWAN module (select products only) (14)
2.
Remove the seven Phillips M2.0 × 4.0 screws (1).
3.
Remove the two Phillips M2.0 × 2.0 screws (2).
4.
Remove the Phillips M1.6 × 4.0 screw (3).
60
Chapter 6 Removal and replacement procedures for authorized service provider parts
You should never disconnect the RTC battery cable from the system board.

Advertisement

Table of Contents
loading

Table of Contents

Save PDF