Table of Contents
Advertisement
Chapter 3
M1
[2]
F-3-11
M1: Stach tray shift motor
M2: Feed motor
M3: Stack slide motor
M4: Offset motor
[1]: Finisher controller PCB
[2]: Paper surface sensor signal
[3]: Process tray papepr presence sensor signal
[4]: Inlet sensor signal
3.3.2 Feed Roller Control
The feed roller is driven by the feed motor (M2).
When the motor turns in the normal direction, the feed roller [1] is driven to eject paper toward the stack tray.
F-3-12
3.3.3 Offset Roller Control
a. Paper feed
The offset roller [1] is driven by the feed motor (M2). When specified time lapses after paper is fed by the feed roller [2], the offset solenoid [3] is turned off to feed
the paper toward the stack tray with the offset roller [1]. After the trailing edge of the paper passes through the feed roller, only the offset roller [1] is used to feed
the paper.
3-4
M4
M3
M2
[3]
[4]
[1]
0007-5484
0007-5485
Advertisement
Table of Contents
