Table of Contents
Advertisement
which continues even when the
tester is disconnected.
This mode continues until the
printer is turned OFF.
LASER POWER CHECK
Do not set the
Note:
CHECK switch to ON while the
printer is operating, otherwise the
back of the print paper will become
dirty.
DENSITY SELECT
Adjusts the image density.
(LED)
Lights when there is paper in the upper
cassette.
(LED)
TRAY
Lights when there is paper on the multi-
purpose tray.
Lights when there is paper in the lower
cassette.
ENVELOPE SENSOR
Lights when there is an envelope in the
envelope feeder.
(LED)
REGIST SENSOR
Lights when paper is at the regist paper
sensor.
END SENS.
Lights when paper Is at the MP tray paper
end sensor.
DELIVERY SENSOR
Lights when paper Is at the paper delivery
sensor.
(LED)
TONER SENSOR
Llghts when there is toner in the cartridge
when the primary AC bias Is being output.
POWER
LASER
(LED)
(LED)
(LED)
(LED)
PAPER SIZE
Indicates the paper size of the cassette in
the paper pick-up unit specified by the
PAPER FEED METHOD SELECT switch.
Table 6-I
[LED)
LASER INTENSITY
Lights when the intensity of the laser beam
is insuffIcient.
CARTRIDGE SENSOR
Lights when there is a cartridge in the
printer when the primary AC bias Is
output.
COMMUNICATION
Flashes twice a second when the tester
communicates with the printer.
Llghts when +24 VA is supplied to the
tester.
(LED)
Advertisement
Table of Contents
