Configuring In The Tia Portal - Siemens Simatic Operating Instructions Manual
Network transitions
Hide thumbs
Also See for Simatic:
- Manual (648 pages) ,
- Operating instructions manual (182 pages) ,
- Equipment manual (36 pages)
Table of Contents
Advertisement
9.2.2
Configuring in the TIA Portal
TIA Portal: Devices & networks
Follow these steps:
1. Select the PN/CAN LINK with its specific article number from the HW catalog
PN/CAN LINK appears in the "Devices & networks" window.
2. Connect the CPU and PN/CAN LINK by means of a PROFINET connection.
CPU and PN/CAN LINK are connected in the "Devices & networks" window with a green
PN line
3. Assign the parameters of the PROFINET interface of the PN/CAN LINK
the configuration of your PROFINET network.
Figure 9-8
SIMATIC PN/CAN LINK
Operating Instructions, 03/2018, A5E39895388-AB
②
.
TIA Portal: Devices & networks
Configuring / programming
9.2 Configuring CANopen Slave
①
. The
③
according to
83
- Quick Links:
- Connecting the Can Bus
Hide quick links:
Advertisement
Table of Contents
