Affixing The Label - Canon iR5055 Series Service Manual

Hide thumbs Also See for iR5055 Series:

Table of Contents

10) Detach the 5 covers of the cord guide [1].

11) Remove the sheet of the 5 cord guides [1] and put them on the indicated

position at the rear side of the host machine.

12) Put the MFP antenna cable [1] through the 5 cord guides [2] and attach

the cord guide cover.

Make sure to route the cable without cable loosening.

13) Connect the MFP antenna cable [1] with the wireless LAN board termi-

14) Insert the reader communication cable and secure it with the wire saddle.

15) Put the power plug into the outlet.

16) Turn ON the main power switch.

17) Check if the wireless LAN board is recognized.

Enter service mode.

Select COPIER > DISPLAY > ACC-STS > PCI.

If "Wireless LAN Board" is displayed, that means that the wireless LAN

board is correctly recognized.

2. Output the user data list

Output the user data list in order to check that the wireless LAN has been rec-

1) Select: [Additional Functions] > [Report Settings] > [Extension Card] in

the Print List > [User Data List].

2) After a message is displayed, select 'Yes' to output the user data list.

2.14.5 Affixing the Label

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N

1) Affix the wireless LAN display label [2] on the indicated position [1] of

the rear upper cover.

Show Quick Links

Table of Contents