Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
Page 5
WARNING Usage of other than specified head- or earphones can result in hearing loss due to excessive sound pressures.
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning.
Page 7
Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com Optional documentation Your product package may include optional documentation that may have been added by your dealer.
® Thank you for purchasing the ASUS LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual...
Assembling the monitor To assemble the monitor: Place the display flat on a cloth on the table, assemble the base according to the drawing and use a coin to turn the screw tight. Put the cable clip inset the hole of stand, and adjust the monitor to the angle that is most comfortable for you. Chapter 1: Product Introduction...
Connect cables 1.4.1 Rear of the LCD monitor HDMI/MHL AC-IN Port DVI Port HDMI Port DisplayPort VGA Port Audio - in Port Earphone - out Port Kensington Lock ASUS LCD Monitor PB258 Series...
Monitor introduction 1.5.1 Using the Controls button Use the control button in the front of the monitor to adjust the image settings. Standard Mode DisplayPort 2560x1440@60Hz Menu QuickFit Input Select Close Brightness Blue Light Filter Power Button/Power Indicator: • Press this button to turn the monitor on/off. • The color definition of the power indicator is as the below table.
Page 12
Close Button • Exit the OSD menu. Shortcut key1 • This is a Shortcut key. The default setting is Brightness. Shortcut key2 • This is a Shortcut key. The default setting is Blue Light Filter. ASUS LCD Monitor PB258 Series...
1.5.2 QuickFit Function The QuickFit function contains three patterns: (1) Grid (2) Paper size (3) Photo size. Grid pattern: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel. Alignment Grid Paper size: Provides users to view their documents in real size on the screen.
Figure 2 • The VESA wall mount kit ( 100 x 100 mm) is purchased separately. • Use only the UL Listed Wall Mount Bracket with minimum weight/load 28.8 kg (Screw size: M4 x 10 mm). ASUS LCD Monitor PB258 Series...
Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle.
or buttons, according to the indicators on the menu, to make your changes. Select the to return to previous menu or to accept and return to previous menu. ASUS LCD Monitor PB258 Series...
3.1.2 OSD Function Introduction Splendid This function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode. PB258 Standard Mode DisplayPort 2560x1440@60Hz Splendid Scenery mode Standard Mode...
Page 18
• Between Level 1 to Level 3, the Brightness function is user-configurable. • Level 4 is optimized setting. It is compliance with TUV Low Blue Light Certification. The Brightness function is not user-configurable. ASUS LCD Monitor PB258 Series...
Page 19
Color Select the image color you like from this function. PB258 Standard Mode DisplayPort 2560x1440@60Hz Splendid Brightness Blue Light Filter Contrast Color Saturation Image Color Temp. Sound Skin Tone Input Select System Setup Shortcut • Brightness: The adjusting range is from 0 to 100. • Contrast: The adjusting range is from 0 to 100.
Page 20
• Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional. ASUS LCD Monitor PB258 Series...
Turkey, Portugal, Czech, Croatia, Hungary, Romania, and Korean. • Key Lock: Disable all key functions. Pressing the second button on the right for more than five seconds to disable key lock function. • Information: Displays the monitor information. ASUS LCD Monitor PB258 Series...
Page 23
• Power Indicator: Turn the power LED indicator on/off. • More: Return the next page of System Setting. • Back: Return the previous page of System Setting. • Power Key Lock: To disable / enable power key • All Reset: Selects “Yes” to revert all settings to the factory default mode. Chapter 3: General Instruction...
Page 24
The default setting is Brightness. • Shortcut 2: User can select from “Blue Light Filter”, “Splendid”, “Brightness”, “AUTO Adjust”, “Contrast”, “Color Temp.”, “Volume”, and set as shortcut key. The default setting is Blue Light Filter. ASUS LCD Monitor PB258 Series...
• Adjust the volume settings of both your monitor and computer. • Make sure the computer sound card driver is properly installed and activated. • Make sure the audio source is correct on the OSD. ASUS LCD Monitor PB258 Series 3-11...
Page 28
59.94 / 60Hz 67.433 / 67.5kHz * The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables. ASUS LCD Monitor PB258 Series 3-13...