Page 6
safety Read these instructions carefully and retain for future reference. Remove all packaging and any labels. Switch off and unplug: before fitting or removing parts; when not in use; before cleaning. Turn the speed control to ‘O’ (OFF) position and unplug before fitting or removing tools/attachments, after use and before cleaning.
Page 7
Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions. The maximum rating is based on the attachment that draws the greatest load.
Page 8
SC LD RISK: Hot ingredients should be allowed to cool to room temperature before processing in the attachment. Do not use the lid to operate the food processor, always use the speed/pulse control. Blender attachment Keep hands and utensils out of the blender goblet whilst connected to the power supply.
The correct fuse whisk cover is identified by colour and a replacement may splashguard be obtained from your Kenwood Authorised Repairer (see Service). attachments If a non-rewireable plug is cut off it must be food processor DESTROYED IMMEDIATELY.
the mixing tools and some of Always remove attachments fitted to the dual drive outlet before raising the mixer head. their uses Ensure that no bowl tools are fitted or stored in the bowl when using the dual K-beater For making cakes, biscuits, pastry, icing, fillings, drive outlet.
electronic speed sensor control important Your processor is not suitable for crushing or grinding coffee beans, or converting granulated Your mixer is fitted with an electronic speed sensor sugar to caster sugar. control that is designed to maintain the speed When adding almond essence or flavouring to under different load conditions, such as when mixtures, avoid contact with the plastic as this may...
to use the cutting discs glass blender 1 Fit the bowl on the power unit, add the detachable filler cap drive shaft. 2 Hold by the centre grip, place the disc onto the goblet drive shaft with the appropriate side uppermost. sealing ring 3 Fit the lid.
To blend dry ingredients – cut into pieces, remove Switch off and empty the pulp and juice containers the filler cap, then with the appliance running, drop regularly during use. the pieces down one by one. Keep your hand over hints the opening.
4 Hold the feed tube in place and tighten the ring nut blender 1 Empty the goblet before unscrewing it from the by hand. blade unit. 5 Fit the tray 2 Wash the goblet by hand. 6 Thaw frozen food thoroughly before 3 Remove and wash the seal.
Kenwood Customer Care on 023 9239 2333. Wash by hand, then dry. Have your model number (i.e. KHH30) and Alternatively, refer to dishwasher chart for parts that date code (5 digit code i.e. 13L35) ready. are dishwasher safe and can be washed on the top They are on the underside of the power unit.
Page 16
recommended speed chart and maximum capacities These are a guide only and will vary depending upon the quantity of mix in the bowl and the ingredients being mixed. tool/ recipe type speed time maximum capacities attachment Kitchen machine Whisk Egg whites Min to Max 2 mins 2-8 (70g-280g/2oz-10oz)
troubleshooting guide Problem Cause Solution The machine will not operate No power/indicator light not lit. Check machine is plugged in. when using mixing tools. Mixer head not locked down correctly. Check that the mixer head is locked down correctly. Outlet cover not fitted correctly. Check that the outlet cover is located correctly.
Page 18
troubleshooting guide Problem Cause Solution Power On light flashing rapidly. Normal operation. If using an attachment, check The light will flash if one or more of the that it is locked into place interlocks are not engaged correctly. correctly. Check the mixer head is fully in the lowered position, unless using the meat grinder attachment.