Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Parweld XTI-303 AC/DC
Summary of Contents for Parweld XTI-303 AC/DC
- Page 1 INSTRUCTION MANUAL...
-
Page 2: Operator Manual
XTI-303 AC/DC OperatOr Manual ISSue 2... - Page 3 Thank you and congratulations on choosing Parweld. This Owner’s Manual is designed to help you get the most out of your Parweld products. Please take time to read the Safety precautions. They will help you protect yourself against potential hazards in the workplace. With proper maintenance this equipment should provide years of reliable service.
-
Page 4: Table Of Contents
Contents Page 1.0 Safety Precautions 2.0 Product description 3.0 Technical Specifications 4.0 Description of controls 5.0 Installation 5.1 Unpacking the Machine 5.2 Location 5.3 Input and grounding connection 5.4 Output Polarity Connections 5.5 Torch Installation 5.6 Work return lead connection 6.0 Operation 6.1 MMA Welding guide 6.2 TIG welding guide... -
Page 5: Safety Precautions
Use protective screens or barriers to protect others Use only well-maintained equipment. Repair or from flash, glare and sparks; warn others not to watch replace damaged parts at once. Maintain unit the arc. according to manual. Wear protective clothing made from durable, flame www.parweld.com... - Page 6 HOT PARTS can cause severe burns. Do not touch hot parts with bare hands. Allow cooling period before working on gun or torch. To handle hot parts, use proper tools and/or wear heavy, insulated welding gloves and clothing to prevent burns. www.parweld.com...
-
Page 7: Product Description
9 10 11 The link between 1 and 2 should only be fitted when using a foot control or other remote current control. The wire colours shown are for the Parweld Ergo TIG torch. 4.0 Description of Controls 1) ON OFF Switch for switching on or off the mains supply to the machine. -
Page 8: Installation
‘-‘terminal SAFETY PRECAUTIONS But if in doubt consult the electrode manufacturer’s • ELECTRIC SHOCK can kill. literature. • Only qualified personnel should perform this IF TIG welding the torch should always be connected installation. to the ‘-’ terminal. www.parweld.com... -
Page 9: Torch Installation
Metals being joined & electrode comments Mild steel 6013 ideal electrodes for all general purpose work. Features include outstanding operator appeal, easy arc starting and low spatter. Mild steel www.parweld.com... -
Page 10: Tig Welding Guide
At the end of the weld 3/16” (4.8 mm) 200-350 release the torch trigger and the power will slope down and switch off. www.parweld.com... -
Page 11: Fault Finding
2) Set the process mode to 2T or 4T if you prefer a plate and cool latching trigger action. (Note in 4T position you must press and release to start the process and press and slowly. release again to stop the process) www.parweld.com... - Page 12 (f) Use electrodes designed for position in which welding is done, otherwise proper control of slag is difficult. TIG welding problems Weld quality is dependent on the selection of the correct consumables, maintenance of equipment and proper welding technique. www.parweld.com...
- Page 13 (a) Clean the pool contaminated electrode by through contact grinding off the with work piece or contaminates filler rod material (b) Check gas (b) Gas contami- lines for cuts nated with air and loose fitting or change gas cylinder www.parweld.com...
- Page 14 (c) Internal fault fan is not move machine (e) Improve with the machine operating to alternative connection to supply work piece (c) Have a qualified service engineer inspect then repair the welder www.parweld.com...
- Page 15 To clean the unit, remove the screws securing the outer cover, lift off the outer cover and use a vacuum cleaner to remove any accumulated dirt and dust. The unit should also be wiped clean, if necessary; with solvents that are recommended for cleaning electrical apparatus. www.parweld.com...
-
Page 16: Accessories
Stock Code Description Notwithstanding the foregoing, in no event shall the 706100 Flow Meter Mixed Gas 15 lpm warranty period extend more than the time stated plus one year from the date Parweld delivered the product to the authorized distributor. www.parweld.com...