Table of Contents
Advertisement
Chapter 5
5.4 ERROR CODE TABLE
5.4.1 Overview
The printer unit does not have a display panel (LCD) for status indication, and all messages needed to indicate printer operation (status, error) appear on a
PC display using a screen called "status window."
The status window is a window designed to communicate to the user the status of the machine by means of messages and animations.
The messages appear in the message area [1] and the sub message area [2], and a message may be a user message or a service message; the former is used
to prompt the user to take a specific action, while the latter is mat for a service person.
The service messages are described below; for user messages, refer to the User Guide that comes with the printer unit:
5.4.2 Service Messages
A service message will be indicated in response to a fault in the printer unit, and is also called an error code.
An error code is indicated in the message area of the status window, and its detail code (Exxx, xxx being 3 numerals) is indicated in the sub message area.
Error
code
E000
E100
E197
E747
5-4
Canon LBP3000
Canon LBP3000
Job
Options
Help
Service Error
Printer error.
Turn off the printer, and then turn it on again. If the
same error occurs, turn off theprinter, then contact
the store you purchased the printer, or a service
representative. When contacting the service
representative, inform them of the error code
displayed and symptoms.
Error Code : EXXX XXXX
Current Print Job
My Job Operation
Title
Contents
Document Name
User Name
Computer Name
Major cause/detection
The thermistor has an open circuit or
a short circuit.
The heater has an open circuit. The
thermal fuse has blown.
The power supply PCB has a fault.
The engine controller PCB has a fault.
The scanner assembly has a fault.
The is an engine communication
error.
There is a fault in the video controller
memory.
F-5-3
T-5-2
Remedy
- Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the power supply PCB.
- Replace the engine controller PCB.
- Check the connector of the laser scanner assembly.
- Replace the laser scanner assembly.
- Replace the engine controller PCB.
- Replace the engine controller PCB.
- Replace the video controller PCB.
[1]
[2]
0008-0664
0008-0665
- Quick Links:
- Name of Parts
- Error Code Table
Hide quick links:
Advertisement
Chapters
Table of Contents
