Serial Plate Location You will find the model and serial number serial plate. Please refer to the illustration(s) locate the serial plate on your range. Remember to record the serial number under Product Record on this page for future reference. Product Record In this space below, record the date of purchase, model and serial number of your product.
Page 3
Ask your dealer to recommend a qualified authorized repair service. Know how to disconnect the power to the range at the circuit breaker or fuse box in case of an emergency., User Servicing--Do not repair or replace...
Do not let IMPORTANT , UseCareWhen the fire to the side of the range when opening the door of a hot oven. Let or foam-type hot air or steam escape before you remove or replace food in the oveR. * Keep Oven Vent Ducts Unobstructed.
DO NOT cut or remove the grounding safety, the range must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded. If a 2-prong wall receptacle...
Push the surface control knob in and turn counterclockwise position. Release the knob and rotate to the LITE position. Ifyour range is equipped with electronic ignitors, all four ignitors will spark at the same time. However, only the burner you are turning on will ignite.
Before Setting Oven Controls OVEN VENT Rack positions Oven Control Functions READ TH E iNSTRUCTIONS CAREFU LLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below. BAKE PAD--Used to select the bake function.
Note: The t!me 0fday must first be set in order to operate the ovenl To Set the Clock When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00". Press Within 5 seconds, press and hold the...
(See Fig. 1). Be sure front of pan is positioned correctly in rack. Slide the broiler drawer all the way into the range. Press _. " =- " will appear in the display.
+35°F. You may also adjust the oven temperature downward in 5°F increments with each press of the v range of -35to +35). Note: Your oven control was factory set in the (Fahrenheit) °F Temperature Display Mode. To change for (Celsius) °C, see Changing the Temperature Manual.
General Care & Cleaning Cleaning Various Parts of Your Range Before cleaning any part of the range, be sure all controls are turned OFF and the range is COOL. REMOVE SPILLOVERS AND HEAVY SOILINGAS SOON AS POSSIBLE. REGULAR CLEANINGSWILL CLEANINGS LATER.
Page 12
Press wire holder to one side to release the glass shield. Replace bulb with a new40 watt appliance bulb. Turn power back on again at the main source (or plug the range back in). The clock will then need to be reset. To reset, see "Setting the Clock" and "Setting the Minute Timer"...
To lower the range top, grasp the front corner of each side of the top while pushing back on each rod with the heel of your hand. This will release the notched support. Hold the range top and gently slide the range top down to the range.
Range is not level - (1) Poor installation. center of oven. Place a level on the oven rack. Adjust leveling legs at base of range until the oven rack is level. (2) Be sure floor is level, strong & stable enough to adequately range.
Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable But like all products, it may require preventive maintenance time to time. That's when having a Master Protection Agreement save you money and aggravation.
Page 16
For repair = in your home - of all major brand appliances, lawn and garden equipment, no matter who made it, no matter who sold it! iiiiiiiiiiiiiiiii_ For the replacement owner's manuals that you need to do-it-yourself. iiiiiiiiiiiiiiiii_ For Sears professional and items like garage door openers and water heaters.