Table of Contents
Advertisement
F-6-43
2) Remove the 2 screws [1], and disconnect the 2
connectors [2]; then, detach the connector base [3].
F-6-44
3) Disconnect the 4 connectors [1] and the 2 flat
cables [2], and remove the 5 screws [3] then, detach
the interface PCB unit [4].
F-6-45
6.4.5 Inverter PCB
6.4.5.1
Removing
Copyboard Glass
1) Open the ADF or the copyboard cover.
2)
Points to Note When Removing the Copyboard
Glass
When removing the copyboard glass, take care not to
touch the surface of the glass or the white plate behind
it.
(The presence of dirt will cause lines in the images.)
If dirt is found, be sure to remove it using lint-free
paper moistened with alcohol.
F-6-46
Chapter 6
the
0000-8287
6-21
- Quick Links:
- E602-0001/E602-0002/E602-0003 Error
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
