hit counter code
Download
Share
Print this page
Black & Decker Matrix BDCDMT112 Instruction Manual
  1. Manuals
  2. Brands
  3. Black & Decker Manuals
  4. Drill
  5. BDCDMT112
  6. Instruction manual

Black & Decker Matrix BDCDMT112 Instruction Manual

12v max, 20v max power unit & drill attachment
Hide thumbs Also See for Matrix BDCDMT112:

Advertisement

Quick Links

Download this manual See also: Instruction Manual

INSTRUCTION MANUAL

Catalog Number
BDCDMT112
*Maximum initial battery pack voltage
(measured without a workload) is 12
volts. The nominal voltage is 10.8.
Thank you for choosing Black & Decker!
Go to www.BlackandDecker.com/NewOwner
to register your new product.
PLEASE READ BEFORE RETURNING THIS
PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your Black & Decker purchase, go to
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS
If you can't find the answer or do not have access to the Internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPA—OL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
12V MAX*, 20V MAX** POWER UNIT
& DRILL ATTACHMENT
)
(12V MAX*
**Maximum initial battery pack voltage
(measured without a workload) is 20
volts. The nominal voltage is 18.
Catalog Number
BDCDMT120
(20V MAX**
)

Advertisement

loading

Related Manuals for Black & Decker Matrix BDCDMT112

Summary of Contents for Black & Decker Matrix BDCDMT112

  • Page 1: Instruction Manual

    12V MAX*, 20V MAX** POWER UNIT & DRILL ATTACHMENT INSTRUCTION MANUAL Catalog Number Catalog Number BDCDMT112 BDCDMT120 (20V MAX** (12V MAX* *Maximum initial battery pack voltage **Maximum initial battery pack voltage (measured without a workload) is 12 (measured without a workload) is 20 volts.

  • Page 2: General Safety Rules

    SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
  • Page 3 c) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/ or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
  • Page 4 Keep your hair, clothing, and gloves away from air vents. Air vents often cover moving parts in which these items can be caught. Hold tool rmly with two hands, one hand on the handle, and the other gripping the bottom around the battery area.

  • Page 5: Important Safety Instructions For Battery Chargers

    20V Max** 12V Max* FUNCTIONAL DESCRIPTION 1. 12v Max* battery charger 6. 20v Max** battery release button 11. Drill/screwdriver attachment 2. 12v Max* battery 7. Forward/reverse slider 12. Keyless chuck 3. 12v Max* battery release button 8. Variable speed trigger 13.
  • Page 6 Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of re, electric shock, or electrocution. An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety.
  • Page 7 1. The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold. 2. Long storage will not harm the battery pack or charger. 12VOLT MAX* BATTERY PACK (BDCDMT112) CHARGING, INSTALLING, AND REMOVING 12VOLT MAX* CHARGING PROCEDURE Black &...
  • Page 8 2. The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer. 3.
  • Page 9 This charger is designed to detect certain problems that can arise with the battery packs or the power source. Problems are indicated by one LED flashing in different patterns. BAD BATTERY The charger can detect a weak or damaged battery. The red LED flashes in the pattern indicated on the label.
  • Page 10 OPERATING: POWER UNIT TRIGGER SWITCH & FORWARD/REVERSE SLIDER The forward/reverse slider (7) is used to control the direction the chuck (12) spins - foward to drive screws, reverse to remove screws. It is located above the variable speed trigger (8). To reverse the motor, release the trigger FIRST, then push the slider to the right hand side of the tool when viewing from the rear.
  • Page 11 SCREW DRIVING For driving fasteners, the reversing button should be pushed to the left. Use reverse (button pushed to the right) for removing fasteners. When moving from forward to reverse, or vice versa, always release the trigger switch first. KEYLESS CHUCK - FIGURE H WARNING : To reduce the risk of injury, turn off and remove battery from the tool before making any adjustments or...

  • Page 12: Troubleshooting

    START IT. DAMAGE TO THE DRILL CAN RESULT. Make sure switch turns drill on and off. DRILLING IN WOOD Holes in wood can be made with the same twist drill bits used for metal or with spade bits. These bits should be sharp and should be pulled out frequently when drilling to clear chips from the flutes. DRILLING IN METAL Use a cutting lubricant when drilling metals.
  • Page 13 programs in the United States and Canada to facilitate the collection of spent lithium-ion batteries. Help protect our environment and conserve natural resources by returning the tool to an authorized Black & Decker service center for recycling. You may also contact your local recycling center for information on where to drop off the spent battery, or call 1-800-8-BATTERY.

This manual is also suitable for:

Matrix bdcdmt120