CALL US AT: 1800 338 002 (Aust) or 0800 339 258 (NZ). period. Technical Data Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, DCV582-XE organisation of work patterns. Power source AC/DC IMPORTANT SAFETY INSTRUCTIONS...
Page 4
When using this vacuum, basic safety precautions should always be followed including • Do not use the appliance to pick up flammable or combustible liquids, such as the following: gasoline, or use in areas where flammable or combustible liquids are present. •...
Page 5
• Young children and the infirm. This appliance is not intended for use by young • Respiratory protection: AS/NZS1716 Respiratory Protective Devices. children or infirm persons without supervision. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and – This appliance is not intended for use by persons (including children) with other construction activities contains chemicals known to cause cancer, birth defects reduced physical, sensory or mental capabilities, or lack of experience and or other reproductive harm.
(grounded) no .......no load speed on. Never tape the trigger switch in the ON position....Class II Construction n ......rated speed WARNING: Fire hazard. Never attempt to open the battery pack for any reason. If (double insulated) .......earthing terminal the battery pack case is cracked or damaged, do not insert into the charger. Do not …/min .....per minute .......safety alert symbol crush, drop or damage the battery pack.
Page 7
• Before using the charger, read all instructions and cautionary markings on the • Do not operate the charger with a damaged cord or plug. charger, battery pack and product using the battery pack. • Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way.
Indicator Light Operation NOTE: This could also mean a problem with a charger. PROBLEM POWERLINE PACK CHARGING Some chargers have a problem powerline indicator. When the charger is used with some portable power sources such as generators or sources that convert DC to AC, the PACK CHARGED charger may temporarily suspend operation, flashing the red light with two fast blinks followed by a pause.
FIG. 2 6. Foreign materials of a conductive nature such as, but not limited to, grinding dust, metal chips, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity.
OPERATION Using the Appliance (Fig. 5) FIG. 5 FIG. 3 1 Attach the appropriate accessory to the hose (B). WARNING: To reduce the risk of injury, turn unit off, disconnect it from power source and remove the battery 2. Insert D WALT battery pack or plug into a 230V wall before installing and removing accessories, before outlet.
Page 11
Filter 2. Twist the vacuum hose (B) to remove. 3. Insert the hose into the side exhaust port (F) and twist to secure. FILTER CARE The wet/dry filter (E) included with this vacuum is a long life filter. To be effective MAINTENANCE in minimizing dust recirculation the filters MUST be installed correctly and in good WARNING: To reduce the risk of injury, turn unit off, disconnect it from power...
Page 12
Cleaning Cord, Hose and Accessory Storage (Fig. 2) When the vacuum is not in use, the power cord should be secured around the WARNING: Blow dirt and dust out of all air vents with clean, dry air at least once a week.