Page 1: Table Of Contents
DIGITAL RECORDER RS-232C COMMUNICATION CAPACITY OPERATION MANUAL MODEL DX-TL2500E series Contents Connecting to a personal computer Connecting to a personal computer ....2 2 2 2 2 Connecting to a personal computer Connecting to a personal computer ..Connecting to a personal computer ..
Page 2: Connecting To A Personal Computer
Connecting to a personal computer I Connecting with a personal computer This unit can be remote controlled from a PC equipped with a RS-232C connection. It is also possible to input comments from a PC for recording comment information along with the video. o Connection via modem Please use RS-232C Straight cable (9pin) to connect a modem with this unit.
Page 3: Command Codes
Command codes I RS-232C settings Communication related settings of this unit are made in “MODE” and “SETTINGS” of the <RS-232C> screen. Perform settings so that they are the same as the connecting modem or PC. When remote controlling this unit from a PC, set “MODE” in the <RS-232C> screen to “REMOTE A” , “RE- MOTE B”...
Page 4: False Operation Panel Command Type
Command codes (continued) o False operation panel command type Operations can be specified from a PC as if operating the actual operation panel of the unit while viewing the output video. Each command is a command type that corresponds to the operation button of the unit. •...
Page 5: Details Of The Numbers
Command codes (continued) o Details of the numbers : When the setting of DELIMITER on <RS-232C SETTINGS> display is set to CR, carriage return code (0DH) will be input. If the setting is CR•LF, carriage return code (0DH) and line feed code (0AH) will be input. : When the setting of DELIMITER on <RS-232C SETTINGS>...
Page 6 Command codes (continued) • RS-232C [Direct operation specification] operation setting system command form General (2/3) Commands name Commands Status Notes **** : OUTPUT A switcher command OUTPUT A switcher SW**** ≤ RC ≥ EX,** SW**** ≥ 0100 : Single screen sequential 0101 : CH1 0102 : CH2 0103 : CH3...
Page 7 Command codes (continued) • RS-232C [Direct operation specification] operation setting system command form General (3/3) Commands name Commands Status Notes : Acquire the recorded period Acquire the recorded IF** ≤ RC ≥ period EX,** IF** 01 : MAIN 02 : SUB 03 : ARCHIVE 04 : CFC (10)
Page 8: Time Date/Display Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <TIME DATE/DISPLAY SETTINGS> Commands name Commands Status Notes ***** TIME DATE ADJUST <Menu setting> <Writing of menu information> RC ≥ 00004 : YEAR 00005 : MONTH DW,***** ***** ≤...
Page 9: Mpx Display Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <MPX DISPLAY SETTINGS> (1/3) Commands name Commands Status Notes OUTPUT A <Writing of menu information> ***** <Menu setting> SPLIT4(a) : SPLIT 4 SCREEN DW,***** ***** ≤ RC ≥ SETTING EX,** DW,*****...
Page 10 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <MPX DISPLAY SETTINGS> (2/3) Commands name Commands Status Notes OUTPUT A <Writing of menu information> ***** <Menu setting> 00423 : SEQUENCE 1 00424 : SEQUENCE 2 SEQUENCE SETTING DW,***** ***** ≤...
Page 11 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <MPX DISPLAY SETTINGS> (3/3) Commands name Commands Status Notes ***** OUTPUT B <Menu setting> <Writing of menu information> 1st row : SPLIT 16 SCREEN DW,***** ***** ≤ RC ≥...
Page 12: Motion Detection Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <MOTION DETECTION SETTINGS> Commands name Commands Status Notes ***** DETECTION MASK <Menu setting> <Writing of menu information> 00533 ~ 00724 : CH1 00725 ~ 00916 : CH2 SETTING DW,***** *****...
Page 13: Record Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <RECORD SETTINGS> (1/2) Commands name Commands Status Notes RECORD SETTING <Writing of menu information> ***** <Menu setting> 03703 : CH1 03704 : CH2 03705 : CH3 03706 : CH4 (PPS) DW,***** *****...
Page 14 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <RECORD SETTINGS> (2/2) Commands name Commands Status Notes ***** ALARM SETTING <Menu setting> <Writing of menu information> 04238 ~ 04253 : ALARM 1 - RECORD CAMERA 1 ~ 16 (RECORDED CAMERA) DW,***** *****...
Page 15: Timer Program Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <TIMER PROGRAM SETTINGS> (1/5) Commands name Commands Status Notes ***** : 03702 SELECTED PATTERN <Menu setting> <Writing of menu information> for timer recording RC ≥ ***** DW,***** ***** ≤...
Page 16 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <TIMER PROGRAM SETTINGS> (2/5) Commands name Commands Status Notes ***** RECORD SETTING <Menu setting> <Writing of menu information> A ~ D (PPS) RC ≥ 03982 : A-CH1 03983 : A-CH2 03984 : A-CH3 03985 : A-CH4...
Page 17 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <TIMER PROGRAM SETTINGS> (3/5) Commands name Commands Status Notes RECORD SETTING <Menu setting> <Writing of menu information> ***** 04174 : A-CH1 04175 : A-CH2 04176 : A-CH3 04177 : A-CH4 A ~ D (A-GRADE) DW,*****...
Page 18 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <TIMER PROGRAM SETTINGS> (4/5) Commands name Commands Status Notes ***** ALARM SETTING A ~ D <Menu setting> <Writing of menu information> (RECORDED CAMERA) RC ≥ ALARM SETTING A : DW,***** ***** ≤...
Page 19 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <TIMER PROGRAM SETTINGS> (5/5) Commands name Commands Status Notes ***** ALARM SETTING A ~ D <Menu setting> <Writing of menu information> (TRIGGER) RC ≥ ALARM SETTING A : DW,***** ***** ≤...
Page 20: Initial Set Up/Information
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <INITIAL SET UP/INFORMATION> (1/2) Commands name Commands Status Notes ***** : 05709 HDD REPEAT REC <Menu setting> <Writing of menu information> MAIN DW,***** ***** ≤ RC ≥ ***** DW,***** *****...
Page 21 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <INITIAL SET UP/INFORMATION> (2/2) Commands name Commands Status Notes HDD MAIN FULL <Menu setting> <Writing of menu information> ***** : 05724 ***** : 00000 : OFF 00001 : ON DW,***** ***** ≤...
Page 22: Search
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <SEARCH> Refer to the “Playback” of [Direct operation specification] operation setting system command form “General” for search execution. Commands name Commands Status Notes TIME DATE SEARCH <Writing of menu information> ***** : Search time <Menu setting>...
Page 23: Copy>,
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <COPY>, <RESTORE> Commands name Commands Status Notes ***** : 06016 COPY, RESTORE <Menu setting> <Writing of menu information> DETECTION DW,***** ***** ≤ RC ≥ ***** EX,** DW,***** ***** ≥...

Page 24: Another Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <ANOTHER SETTINGS> (1/2) Commands name Commands Status Notes HDD SETTING <Inquiry for setting information> <Reading of menu information> ***** : 06401 ***** DR,***** ≤ RC ≥ 00000 : NORMAL 00001 : MIRRORING EX,** DR,*****...
Page 25 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form <ANOTHER SETTINGS> (2/2) Commands name Commands Status Notes (11) : Archive condition Check the condition MD? ≤ RC ≥ (26) (continued) EX,** MD** ••• ** **** 00 : Stop 01 : Start (from Stop) 02 : Execution (25)
Page 26: Rs-232C Warning Display
Command codes (continued) • RS-232C Warning display (1/2) Status Notes Commands name Commands (32) Check the warning WN1? ≤ RC ≥ ••• * : 0 : No error display 1 : Error display (33) (31) (32) : SYSTEM ERROR : TEMP display EX,** WN1*...
Page 27 Command codes (continued) • RS-232C Warning display (2/2) Commands name Commands Status Notes Check the condition RC ≥ : Playback condition MD? ≤ (26) 00 : Stop 01 : Start (from Stop) (continued) EX,** MD** ••• ** **** (25) 02 : Start (from execution) 03 : Playback (single screen) •••...
Page 28: Rs-232C [False Operation Panel] Command Form
Command codes (continued) • RS-232C [False operation panel] command form Commands name Commands Status Notes POWER button (Power on/off) POWER KKP0 ≤ RC ≥EX,** KKP0 ≥ RC ≥EX,** KKP1 ≥ Power on for change mode KKP1 ≤ Power on for Auto set up KKP2 ≤...
Page 29: Rs-232C Status Condition Change Information System
Command codes (continued) • RS-232C Status condition change information system Commands name Status Notes System mode **** EX,AA,**** ≥ 0100 : Power off 0101 : System change 0104 : Power on 0107 : <SETTINGS> menu 0108 : <COPY> menu 0109 : <SEARCH> menu 010A : Device unusual situation 010B : Device initialize 010C : Device reconstruction...
Page 30: Character Code List
Command codes (continued) o Character code list (When LANGUAGE is selected to except for “PìCCKàâ”.) Character (Space) " & Character code 00012 00032 00033 00034 00035 00036 00037 00038 00039 00040 00041 00042 00043 Character < > Character code 00058 00059 00060 00061...
Page 31: Comment Search Comment Search
Comment search Characters (character strings) inputted from a PC connected to this unit by RS-232C connection can be recorded as comments along with the video/audio. Recorded comments can be displayed during playback. Furthermore, recorded comments can be specified for search so that the video with the comment can be played back from the beginning. I Comment search command code Commands name Commands...

Mitsubishi Electric DX-TL2500E series Operation Manual

Quick Links

Related Manuals for Mitsubishi Electric DX-TL2500E series

Summary of Contents for Mitsubishi Electric DX-TL2500E series

Table of Contents