Important Safety Information You MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 950950 Service Installation Environmental Information Child Safety Keep this instruction book for future reference and ensure it is passed on to any new owner.
Contents For the User For the Installer Engineers technical data Important Safety Information Installation Description of the Hob Building In Operation Electrical connections Maintenance and Cleaning Wiring Diagram Something Not Working? Fault Finding Service and Spare Parts Commissioning Guarantee Conditions Conversion from Natural Gas to LPG Description of the Hob 1.
Guarantee Conditions Electrolux Standard Guarantee European Guarantee Conditions 8.30am and 5.30pm premium Exclusions This guarantee does not cover:...
Page 7
ELECTROLUX SERVICE FORCE To contact your local Electrolux Service Force Centre telephone 08705 929 929 NORTH EAST CHANNEL ISLANDS SCOTLAND NORTH WEST NORTHERN IRELAND WALES...
Page 8
ELECTROLUX SERVICE FORCE To contact your local Electrolux Service Force Centre telephone 08705 929 929 LONDON & EAST ANGLIA SOUTH EAST MIDLANDS SOUTH WEST...
Instructions for the Installer Engineers technical data OVERALL DIMENSIONS SUPPLY CONNECTIONS Gas: Electric: CUT OUT DIMENSIONS Ignition HT Spark Rear Left Burner (semi-rapid) Rear Right Burner (semi-rapid) Front Left Burner (rapid) Front Right Burner (auxiliary) BURNER RAPID SEMI-RAPID AUXILIARY (large) (medium) (small) POSITION...
Important safety requirements FITTING THE GAS HOB WITHOUT A COOKER HOOD ABOVE 700 mm 400 mm 400 mm FO 2369* FITTING THE GAS HOB WITH A COOKER HOOD ABOVE Location 700 mm 400 mm 400 mm FO 2231* Installation IMPORTANT WHEN THE HOB IS FIRST INSTALLED qualified personnel...
Gas Connection FO 0814 FO 0264 Rectangular cut-out size for hob Cut Out Size FO 2098 Building In ON/OFF SWITCH Building over a cupboard or drawer FLEX OUTLET FO 0763 Building over a kitchen unit with door ON/OFF SWITCH FLEX OUTLET FO 1013 FO 0764...
Fitting the Hob into the worktop Seal FO 0199 Electrical connections A cut off plug inserted into a 13 amp socket is a seriuos safety (shock) hazard. Ensure that the cut THIS HOB MUST BE EARTHED. off plug is disposed of safely. The manufacturer declines any liability should these safety measures not be observed.
Wiring Diagram 220/240 A. IGNITOR SWITCH B. IGNITOR UNIT Fault Finding Preliminary Electrical Systems SOCKET PLUG (with cover (face view) removed) Check START Isolate appliance and carry out: A: Earth Continuity check. Carry out: Electricity supply Carry out: D: Resistance to should now be C: Polarity check.
Page 14
Ignition System / Gas Ignition Check gas supply at Ignitor does not spark burner Check plug top fuse Light burner manually and replace if necessary Check polarity and Check by pass simmer earth continuity of adjusted supply point Check position of the Check earth continuity electrode of appliance...
Commissioning Procedure: Minimum adjustment screw Pressure Testing Conversion from Natural Gas to TO ADJUST THE GAS RATE Method IMPORTANT The replacement/conversion of the gas hob should only be undertaken by a competent person.