Page 2
SPECIFICATION Contents AV-21QMG7/G, Items AV-2100QE, AV-21QMG7/S, AV-21Q17 AV-21Q17/L AV-21QMG7B/G Dimensions (W × H × D) 64.9cm × 48.7 cm × 35.1 cm Mass 21 kg TV RF System B/G, I, D/K, M B/G, I, D/K Colour System TV Mode PAL, SECAM, NTSC 3.58 / PAL, SECAM NTSC 4.43...
SECTION 1 PRECAUTION SAFETY PRECAUTIONS (1) The design of this product contains special hardware, (8) When service is required, observe the original lead dress. many circuits and components specially for safety Extra precaution should be given to assure correct lead purposes.
This function can set a channel you frequently view to the This function can reduce the picture noise. Return Channel and you can view that channel at any time with one-touch. MAIN DIFFERENCE LIST Item AV-2100QE AV-21Q17 AV-21Q17/L AV-21QMG7/G AV-21QMG7/S AV-21QMG7B/G ←...
SECTION 3 DISASSEMBLY DISASSEMBLY PROCEDURE 3.1.1 REMOVING THE REAR COVER • Unplug the power cord. (1) Remove the 9 screws [A] and 1 screw [B] as shown in Fig.1. (2) Withdraw the REAR COVER toward you. CAUTION: When reinstalling the rear cover, carefully push it inward after inserting the MAIN PWB into the REAR COVER groove.
Page 6
FRONT CABINET SPEAKER CRT SOCKET PWB (Within MAIN PWB) CHOKE COIL FRONT COTROL PWB (Within MAIN PWB) SPEAKER MAIN PWB POWER CORD REAR COVER Fig.1 1-6 (No.YA552)
Page 7
MEMORY IC REPLACEMENT • This model uses the memory IC. • This memory IC stores data for proper operation of the video and drive circuits. • When replacing, be sure to use an IC containing this (initial value) data. 3.2.1 MEMORY IC REPLACEMENT PROCEDURE 1.
Page 8
AI VOLUME CHILD LOCK BLUE BACK AUTO (3) MENU-3 Setting item Setting position LANGUAGE ENGLISH COLOUR SYSTEM SOUND SYSTEM 3.2.3 SYSTEM CONSTANT SETTING Setting value Setting item AV-2100QE AV-21Q17/L AV-21Q17 AV-21QMG7/G AV-21QMG7B/G AV-21QMG7/S ← ← ← ← SYSTEM TRIPLE MULTI ←...
Page 9
3.2.4 SERVICE MENU SETTING ITEMS Setting item Setting value Setting item Setting value 1. IF 1.VCO 4. VSM/WB CONT. 2.DELAY POINT BRIGHT SHARP COLOUR 2. V/C 1.CUTOFF (R/B/G) TINT 2.WRD (G/B) WDR G 3.BRIGHT (TV/VDO 1,2) WDR B 4.CONT. (TV/VDO 1,2) 5.COLOUR (TV/VDO 1,2) 6.TINT (TV/VDO 1,2) 7.SHARP (TV/VDO 1,2)
Page 10
REPLACEMENT OF CHIP COMPONENT 3.3.1 CAUTIONS (1) Avoid heating for more than 3 seconds. (2) Do not rub the electrodes and the resist parts of the pattern. (3) When removing a chip part, melt the solder adequately. (4) Do not reuse a chip part after removing it. 3.3.2 SOLDERING IRON (1) Use a high insulation soldering iron with a thin pointed end of it.
SECTION 4 ADJUSTMENT ADJUSTMENT PREPARATION MEASURING INSTRUMENT AND FIXTURES (1) There are 2 ways of adjusting this TV : One is with the (1) DC voltmeter (or digital voltmeter) REMOTE CONTROL UNIT and the other is the (2) Oscilloscope conventional method using adjustment parts and (3) Signal generator components.
Page 12
ADJUSTMENT LOCATIONS MAIN PWB ASS'Y (CRT SOCKET) (SOLDER SIDE) TP-47/R TP-47B TP-47/G MAIN PWB ASS'Y CRT EARTH (FRONT LED) CRT EARTH FRONT (BRAIDED ASS'Y) (BRAIDED ASS'Y) S804 S802 J808 J807 J806 J809 S805 S803 S801 CN10A CN00A POWER SW CN00S S901 POWER CORD...
Page 13
BASIC OPERATION OF SERVICE MENU 4.6.1 TOOL OF SERVICE MENU OPERATION Operate the SERVICE MENU with the REMOTE CONTROL UNIT. 4.6.2 SERVICE MENU ITEMS With the SERVICE MENU, various adjustments can be made, and they are broadly classified in the following items of settings. 1.IF Adjustment of the IF circuits.
Page 14
4.6.6 METHOD OF SETTING 1. IF [1. VCO] (1) [1] key Select 1. IF. (2) [1] key Select 1. VCO. Check the arrow position between the ABOBE REF. and BELOW REF. (4) [DISPLAY] key As you press this key twice, you will return to the SERVICE MENU. [2.
Page 15
4.6.7 SERVICE MENU FLOW CHART SERVICE MENU 1. IF SERVICE MENU IF SERVICE MENU VCO(CW) 210.25 MHz 1.IF 2.V/C 1.VCO TOO HIGH 3.DEF 4.VSM W/B 2.DELAY POINT ABOVE REFERENCE 5. PRESET JUST REFERENCE 6.PLUG & PLAY (OFF) BELOW REFERENCE 7.HOTEL MODE (OFF) TOO LOW 1-7 SELECT DISP: EXIT...
Page 16
• The " --- " means adjustment is not possible. • " * " is variable values for adjustment and other value variable when have problem only. [2. V/C] (Values for adjustment indicate in hexadecimal number.) [AV-2100QE, AV-21Q17, AV-21Q17/L] Initial setting value Setting item...
Page 18
[4. VSM/WB] (Values for adjustment indicate in hexadecimal number.) Initial setting value Setting item Variable range SOFT USER CONT. 80 - 7F BRIGHT 80 - 7F SHARP 80 - 7F COLOUR 80 - 7F TINT 80 - 7F Initial setting value Setting item WARM NORMAL...
Page 19
ADJUSTMENT PROCEDURE 4.8.1 CHECK ITEM Measuring Item Test point Adjustment part Description instrument B1 VOLTAGE Signal TP-B1 : 1-pin (1) Receive a whole black signal. generator TP-E : 5-pin (2) Connect a DC voltmeter to 1-pin and 5-pin of S1 (S1 connector) connector.
Page 20
Measuring Item Test point Adjustment part Description instrument DELAY POINT Signal [1. IF] (1) Receive a black and white signal (colour off). (AGC) generator 2. DELAY POINT (2) Select 1. IF. (AGC TAKE-OVER) (3) Select <2. DELAY POINT>. Remote (4) Set the setting values of the setting items as shown control unit bellow table.
Page 21
4.8.4 DEFLECTION CIRCUIT • There are 2 modes of adjustment (setting value) 50Hz mode and 60Hz mode, depending upon the kind of signals (vertical frequency 50Hz / 60Hz). • When adjusted in 50Hz mode and 60Hz mode will be automatically set. The setting (adjustment) using the REMOTE CONTROL UNIT is made on the basis of the initial setting values.The setting values which adjust the screen to the optimum condition can be different from the initial setting values.
Page 22
Measuring Item Test point Adjustment part Description instrument H. BOW Signal [4.DEF] (1) Receive a crosshatch signal. generator 5. HOR BOW (2) Select 4. DEF from the SERVICE MENU. (3) Select <5. HOR BOW>. Remote (4) Set the initial setting value of <5. HOR BOW>. control unit (5) Adjust <5.
Page 23
Measuring Item Test point Adjustment part Description instrument SIDE PIN Signal [4. DEF] PAL SIDE PIN generator 11. EW-PIN (1) Receive a PAL crosshatch signal. (2) Select 4. DEF from the SERVICE MODE. Remote (3) Select <11. EW-PIN>. control unit (4) Set the initial setting value of <11.
Page 24
4.8.5 VIDEO CIRCUIT Measuring Item Test point Adjustment part Description instrument WHITE Signal [2.V/C] (1) Receive a 100% all white signal (colour off). BALANCE generator 1. CUT OFF (R) (2) Select 2. V/C from the SERVICE MENU. (LOW LIGHT) 1. CUT OFF (G) (3) Select <1.
Page 25
(A) in the voltage table. NTSC 4.43 COLOUR Voltage setting (A) (1) When NTSC 3.58 is set, NTSC 4.43 will be automatically set at the respective values. SECAM NTSC3.58 AV-21Q17 AV-21Q17/L +18V +16V +17V (VDO) AV-2100QE AV-21QMG7/G AV-21QMG7/S +18V +16V +21V (RF) AV-21QMG7B/G (No.YA552)1-25...
Page 26
(1) When NTSC 3.58 is set, NTSC 4.43 will be automatically set at the respective values. W Y Cy G Mg R B (B) : W-Cy Voltage setting (B) NTSC3.58 AV-21Q17 AV-21Q17/L +14V +17V (VDO) AV-2100QE AV-21QMG7/G AV-21QMG7/S +14V +15V (RF) AV-21QMG7B/G 1-26 (No.YA552)
Page 27
4.8.6 VSM/WB SETTING Measuring Item Test point Adjustment part Description instrument VSM/WB Remote [4. VSM] (1) Select 4. VSM from the SERVICE MENU. control unit CONT. (2) Select PICTURE MODE to "SOFT". BRIGHT (3) Select <CONT.>. SHARP (4) Set the initial setting value of <CONT.> as shown in COLOUR the below table.
SECTION 5 TROUBLESHOOTING SELF CHECK FUNCTIONS 5.1.1 OUTLINE This model has self check functions given below. When an abnormality has been detected, the SUB POWER is turned off and POWER LED flashes to inform of the failure. An abnormality is detected by the signal input state of the control line connected to the microcom- puter.
Page 29
Victor company of Japan, Limited Display category 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama-city, Kanagawa-prefecture, 221-8528, Japan (No.YA552) Printed in Japan...
AV-2100QE AV-21Q17 AV-21Q17 AV-21QMG7 AV-21QMG7B AV-21QMG7 STANDARD CIRCUIT DIAGRAM NOTE ON USING CIRCUIT DIAGRAMS 1.SAFETY Type No indication : Ceramic capacitor The components identified by the symbol and shading are : Metalized mylar capacitor critical for safety. For continued safety replace safety ciritical : Polypropylene capacitor components only with manufactures recommended parts.
BLOCK DIAGRAM IC701 MAIN PWB (1/2) MAIN PWB (2/2) MAIN CPU / IF PROCESS / VIDEO(Y/C/RGB)PROCESS / DEF.PROCESS / AUDIO PROCESS R OUT Q351 SCL/SDA R OUT SCL/SDA 57,58 ODS R / G / B / Ys / I G OUT Q352 SCL/SDA G OUT...
Page 37
Victor company of Japan, Limited Display Category 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama-city, Kanagawa-prefecture, 221-8528, Japan (No.YA552) Printed in Japan...
PARTS LIST CAUTION The parts identified by the symbol are important for the safety . Whenever replacing these parts, be sure to use specified ones to secure the safety. The parts not indicated in this Parts List and those which are filled with lines --- in the Parts No. columns will not be supplied. P.W.
Page 39
USING P.W. BOARD & REMOTE CONTROL UNIT ....................3-2 EXPLODED VIEW PARTS LIST ..........................3-3 EXPLODED VIEW ............................... 3-4 PRINTED WIRING BOARD PARTS LIST [AV-2100QE] .................... 3-5 MAIN P.W. BOARD ASS'Y (SCQ-1403A-H2) ....................3-5 PRINTED WIRING BOARD PARTS LIST [AV-21Q17] ....................3-8 MAIN P.W.
M3 x 10mm 13 GG10482-002A-H REAR COVER 14 CM47005-A01-H POWER CORD CLAMP 15 QMPR820-165-JC POWER CORD 1.65m BLACK AV-2100QE,AV-21Q17,AV-21Q17L,AV-21QMG7G,AV-21QMG7BG 15 QMPR650-165-JC POWER CORD 1.65m BLACK AV-21QMG7S GG30119-001B-H SUB PCB HOLDER QYSBSF4012ZA TAP SCREW M4 x 12mm(x2) AV-2100QE ...
PRINTED WIRING BOARD PARTS LIST [AV-2100QE] MAIN P.W. BOARD ASS'Y (SCQ-1403A-H2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local D955 FR105GT-T3 SI DIODE D956 1SS133-T2 SI DIODE IC401 AN15526A D957 MA8330/M/-X Z DIODE...
Page 43
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C724 QETN1HM-106Z E CAPACITOR 10uF 50V M R358 NRSA63J-470X MG RESISTOR 47Ω 1/16W J C725 QENC1HM-105Z BP E CAPACITOR 1uF 50V M R359 NRSA63J-470X MG RESISTOR 47Ω...
Page 44
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R730 NRSA63J-102X MG RESISTOR 1kΩ 1/16W J K953 QQR1113-001Z FERRITE BEADS R732 NRSA63J-471X MG RESISTOR 470Ω 1/16W J K954 QQR1113-001Z FERRITE BEADS R733 NRSA63J-221X MG RESISTOR 220Ω...
PRINTED WIRING BOARD PARTS LIST [AV-21Q17] MAIN P.W. BOARD ASS'Y (SCQ-1402A-H2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local D955 FR105GT-T3 SI DIODE D956 1SS133-T2 SI DIODE IC401 AN15526A D957 MA8330/M/-X Z DIODE IC601 AN5279 D971...
Page 46
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C720 NCB31HK-103X C CAPACITOR 0.01uF 50V K R114 NRSA63J-122X MG RESISTOR 1.2kΩ 1/16W J C721 NCB31HK-103X C CAPACITOR 0.01uF 50V K R115 NRSA63J-821X MG RESISTOR 820Ω...
Page 47
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R718 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W J CP953 ICP-N25-T IC PROTECTOR 1.0A R719 NRSA63J-822X MG RESISTOR 8.2kΩ 1/16W J ICP-N38-T IC PROTECTOR 1.5A CP954 R720 NRSA63J-103X MG RESISTOR...
PRINTED WIRING BOARD PARTS LIST [AV-21Q17/L] MAIN P.W. BOARD ASS'Y (SCQ-1407A-H2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local D955 FR105GT-T3 SI DIODE D956 1SS133-T2 SI DIODE IC401 AN15526A D957 MA8330/M/-X Z DIODE IC601 AN5279 D971...
Page 49
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C720 NCB31HK-103X C CAPACITOR 0.01uF 50V K R114 NRSA63J-122X MG RESISTOR 1.2kΩ 1/16W J C721 NCB31HK-103X C CAPACITOR 0.01uF 50V K R115 NRSA63J-821X MG RESISTOR 820Ω...
Page 50
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R718 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W J CP953 ICP-N25-T IC PROTECTOR 1.0A R719 NRSA63J-822X MG RESISTOR 8.2kΩ 1/16W J ICP-N38-T IC PROTECTOR 1.5A CP954 R720 NRSA63J-103X MG RESISTOR...
PRINTED WIRING BOARD PARTS LIST [AV-21QMG7/S] MAIN P.W. BOARD ASS'Y (SCQ-1408A-H2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local D955 FR105GT-T3 SI DIODE D956 1SS133-T2 SI DIODE IC401 AN15526A D957 MA8330/M/-X Z DIODE IC601 AN5279 D971...
Page 52
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C720 NCB31HK-103X C CAPACITOR 0.01uF 50V K R114 NRSA63J-122X MG RESISTOR 1.2kΩ 1/16W J C721 NCB31HK-103X C CAPACITOR 0.01uF 50V K R115 NRSA63J-821X MG RESISTOR 820Ω...
Page 53
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R718 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W J CP953 ICP-N25-T IC PROTECTOR 1.0A R719 NRSA63J-822X MG RESISTOR 8.2kΩ 1/16W J ICP-N38-T IC PROTECTOR 1.5A CP954 R720 NRSA63J-103X MG RESISTOR...
PRINTED WIRING BOARD PARTS LIST [AV-21QMG7/G,AV-21QMG7B/G] MAIN P.W. BOARD ASS'Y (SCQ-1401A-H2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local D955 FR105GT-T3 SI DIODE D956 1SS133-T2 SI DIODE IC401 AN15526A D957 MA8330/M/-X Z DIODE IC601 AN5279 D971...
Page 55
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C720 NCB31HK-103X C CAPACITOR 0.01uF 50V K R114 NRSA63J-122X MG RESISTOR 1.2kΩ 1/16W J C721 NCB31HK-103X C CAPACITOR 0.01uF 50V K R115 NRSA63J-821X MG RESISTOR 820Ω...
Page 56
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R718 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W J CP953 ICP-N25-T IC PROTECTOR 1.0A R719 NRSA63J-822X MG RESISTOR 8.2kΩ 1/16W J ICP-N38-T IC PROTECTOR 1.5A CP954 R720 NRSA63J-103X MG RESISTOR...
Description Local R56-1400 BATTERY COVER PACKING PACKING PARTS LIST Ref.No. Part No. Part Name Description Local GG10285-017B-H PACKING CASE AV-2100QE,AV-21Q17,AV-21Q17L,AV-21QMG7S GG10282-047B-H PACKING CASE AV-21QMG7G,AV-21QMG7BG GG10483-001A-H CUSHION ASSY 4pcs in 1set GG30097-003B-H POLY BAG GG30096-001B-H POLY BAG ------------ BATTERY AA/R6(x2) ...
Page 58
AV-2100QE/KSK and AV-2100QE/NSK are the models whose production place and destination were changed from that of AV-2100QE. Therefore, this service manual describes only the items which differ from those of the AV-2100QE service manual. For details other than those described in this manual, please refer to the AV-2100QE service manual (No.YA552, 2007/9).
Page 59
SCQ-1403A-H2 SCQ-1409A-H2 MAIN PWB SCQ-3003A-H2 CRT SOCKET PWB GG10478-009A-H GG10478-009A-HK FRONT CABINET ASSY Inc.101-103 PRINTED WIRING BOARD PARTS LIST [AV-2100QE/NSK] As there are many difference points, all parts are listed. Please refer to the PARTS LIST for details. 1-2 (No.YA552B)
Page 60
PARTS LIST PRINTED WIRING BOARD PARTS LIST [AV-2100QE /NSK MAIN P.W. BOARD ASS'Y (SCQ-1409A-H2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local D981 MA111-X SI DIODE D982 MA111-X SI DIODE IC401 AN15526A...
Page 61
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C730 QETN1EM-476Z E CAPACITOR 47uF 25V M R472 NRSA63J-103X MG RESISTOR 10kΩ 1/16W J C731 QETN1HM-474Z E CAPACITOR 0.47uF 50V M R520 QRE141J-101Y C RESISTOR 100Ω...
Page 62
CRT SOCKET P.W. BOARD ASS'Y (SCQ-3003A-H2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R801 NRSA63J-750X MG RESISTOR 75Ω 1/16W J R802 QRE121J-221Y C RESISTOR 220Ω 1/2W J R803 NRSA63J-750X MG RESISTOR 75Ω...
Page 63
SECTION 1 PRECAUTION Please refer to "AV-2100QE (No.YA552)" about this section. SECTION 2 SPECIFIC SERVICE INSTRUCTIONS Please refer to "AV-2100QE (No.YA552)" about this section. SECTION 3 DISASSEMBLY Please refer to "AV-2100QE (No.YA552)" about this section. SECTION 4 ADJUSTMENT Please refer to "AV-2100QE (No.YA552)" about this section.
Page 65
MAIN P.W. BOARD ASS'Y (Page 3-17) Part No. Ref. No. PART NAME DESCRIPTION INCORRECT CORRECT IC702 ATE08-14UMG7 ATE08-21QMG7 (SERVICE) PRINTED WIRING BOARD PARTS LIST [AV-2100QE/NSK] MAIN P.W. BOARD ASS'Y (Additionally: No.YA552B Page 1-3) Part No. Ref. No. PART NAME DESCRIPTION INCORRECT CORRECT IC702 ATE08-2100BENS...
Page 66
SECTION 1 PRECAUTION Please refer to "AV-2100QE (No.YA552)" about this section. SECTION 2 SPECIFIC SERVICE INSTRUCTIONS Please refer to "AV-2100QE (No.YA552)" about this section. SECTION 3 DISASSEMBLY Please refer to "AV-2100QE (No.YA552)" about this section. SECTION 4 ADJUSTMENT Please refer to "AV-2100QE (No.YA552)" about this section.
Page 67
Victor Company of Japan, Limited Display Division 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama-city, Kanagawa-prefecture, 221-8528, Japan (No.YA552D) Printed in Japan...