hit counter code
HP AA-RW20A-TE User Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Switch
  5. AA-RW20A-TE
  6. User manual
HP AA-RW20A-TE User Manual

HP AA-RW20A-TE User Manual

Hewlett-packard 4-gb san switch user guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
McDATA
4Gb SAN Switch
for HP p-Class BladeSystem user guide
Part number: AA-RW20A-TE
First edition: June 2005

Advertisement

Table of Contents
loading

Related Manuals for HP AA-RW20A-TE

Summary of Contents for HP AA-RW20A-TE

  • Page 1 ® McDATA 4Gb SAN Switch for HP p-Class BladeSystem user guide Part number: AA-RW20A-TE First edition: June 2005...
  • Page 2 Hewlett-Packard. The information is provided “as is” without warranty of any kind and is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.

  • Page 3: Table Of Contents

    HP-authorized reseller........
  • Page 4 Editing the security configuration on a switch ........
  • Page 5 Switch administrative states ........
  • Page 6 Backing up and restoring switch configurations ........
  • Page 7 31 Faceplate display — switch information ........
  • Page 8 Topology display switch and status icons ........

  • Page 9: About This Guide

    McDATA 4Gb SAN Switch for HP p-Class BladeSystem quick setup instructions A8001-90001 • McDATA 4Gb SAN Switch for HP p-Class BladeSystem installation guide AA-RW1XA-TE These and other HP documents can be found on the HP documents web site: ® Web Server™ application switch management tool for the McDATA Server”...

  • Page 10: Document Conventions And Symbols

    Document conventions and symbols Table 1 Document conventions Convention Figure 1 Medium blue text: Medium blue, underlined text http://www.hp.com Bold font Italics font Monospace font Monospace, italic font Monospace, bold font WARNING! Indicates that failure to follow directions could result in bodily harm or death.

  • Page 11: Hp Technical Support

    For the name of your nearest HP-authorized reseller: • In the United States, call 1-800-282-6672. • Elsewhere, visit the HP web site: http://www.hp.com. Then click Contact HP to find locations and telephone numbers. McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide...

  • Page 12: Helpful Web Sites

    Helpful web sites For other product information, see the following HP web sites: • http://www.hp.com • http://www.hp.com/go/storage • http://www.hp.com/support/ • http://www.docs.hp.com • http://h71028.www7.hp.com/enterprise/cache/80316-0-0-0-121.html...

  • Page 13: Using Mcdata Web Server

    ® ® Red Hat EL 3.x, 4.x Ethernet port ® ® Internet Explorer 5.0 or later ® ® Navigator 4.72 or later Starting McDATA Web Server, page 14 for more McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide...

  • Page 14: Starting Mcdata Web Server

    Starting McDATA Web Server To start McDATA Web Server after the switch is operational, enter the switch IP address in an internet browser. The workstation used to manage the switch must be able to connect to the default switch IP address 10.0.0.1.

  • Page 15: Exiting Mcdata Web Server

    39. Server” on page 14 for information about the Initial Start ”Displaying the Event states, page 94 McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide Browser” on page 43. If Figure 3, the next time McDATA...

  • Page 16: Using Online Help

    • Displaying transceiver media Figure 3 Preferences dialog – McDATA Web Server To set preferences for your McDATA Web Server sessions, perform the following procedure: Select File > Preferences to open the Preferences dialog. Enter or browse for paths to the working directory and browser. Choose the preferences you want in the Application-wide Options area.

  • Page 17: Mcdata Web Server User Interface

    The menus and the options offered in them vary depending on the display. For example, the Port menu and many of the Switch menu selections are available only in the faceplate display. Menu Tool bar Data window tabs Working status indicator McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide Figure Graphic window Data window...

  • Page 18: Topology Display Menu

    Faceplate display menu NOTE: The Security menu is only displayed if Secure Sockets Layer (SSL) is enabled. Select Switch > Services > SSL to enable SSL. Refer to The keyboard shortcut keys vary by display type: topology display and faceplate display. In addition to the menu bar, both the topology and faceplate displays have context-sensitive menus that pop up when you right-click in the graphic window.

  • Page 19: Shortcut Keys

    Edit Security button — opens the Edit Security dialog (faceplate display only) Help Topics button — opens the online help file 3. The tool bar buttons are an alternative method to using the menu bar. The McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide...

  • Page 20: Fabric Tree

    The same message is provided when you rest the mouse over the fabric icon in the fabric tree. • The fabric tree provides access to the topology and faceplate displays for any fabric or switch. • Click a fabric entry in the fabric tree to open the topology display.

  • Page 21: Working Status Indicator

    Working with switches and links Switch and link icons are selectable and moveable, and serve as access points for other displays and menus. You select switches and links to display information about them, modify their configuration, or delete them from the display.

  • Page 22: Selecting Switches And Links

    Selecting switches and links Selected switch icons are highlighted in light blue. Selected ISLs are displayed as a heavier line. You can select switches and links in the following ways: • Click the icon or link to select a switch or a link.

  • Page 23: Using The Faceplate Display

    Press and hold Control, and click a selected port to cancel that selection. Figure 9 displays the switch name and operational state, and port status. ”Monitoring port McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide status” on page 94 for more...

  • Page 24: Opening The Faceplate Popup Menu

    Faceplate data windows The faceplate display provides the following data windows corresponding to the data window tabs: • Devices — displays information about devices (hosts and storage targets) connected to the switch. • Switch — displays current switch configuration data.

  • Page 25: Managing Fabrics

    This requires sharing a secret between the server and client. The accounting RADIUS supports the auditing of the users and switch services such as Telnet, FTP, and switch management applications. The RADIUS Accounting Server enables (True) or disables (False) the auditing of activity during a user session.

  • Page 26: Adding A Radius Server

    Enter the number of retries in the Retries field. This is the maximum number of times the RADIUS client will retry a request sent to the primary RADIUS server. Select Sign Packet to enable the switch to include a digital signature (Message-Authenticator) in all RADIUS access request packets sent to the RADIUS server. A valid Message-Authenticator attribute will be required in all RADIUS server responses.

  • Page 27: Removing A Radius Server

    RADIUS Local — attempts to authenticate using the RADIUS server. If the switch can not contact the RADIUS server due to a network or some other problem, the switch will authenticate using the local password database. 12.Click Close to close the Radius Server Information dialog.

  • Page 28: Editing Radius Server Information

    RADIUS Server Information dialog — Edit Server tab page To edit information of a RADIUS server, perform the following procedure: Select Switch > Radius Servers in the faceplate display. Click the Edit Server tab in the Radius Server Information dialog shown in Select the server to be edited in server list at the top of the dialog.

  • Page 29: Modifying Authentication Order Radius Server Information

    RADIUS — only attempts to authenticate using the RADIUS server (another computer that provides authentication). c. RADIUS Local — attempts to authenticate using the RADIUS server. If the switch can not contact the RADIUS server due to a network or some other problem, the switch will authenticate using the local password database.

  • Page 30: Securing A Fabric

    The switch validates your account and password when you attempt to add a fabric using McDATA Web Server or log in to a switch through Telnet. Your system administrator defines accounts, passwords, and authority levels that are stored on the switch. Refer to ”Managing user...

  • Page 31: Device Security

    A group is a list of device worldwide names that are authorized to attach to a switch. There are three types of groups: one for other switches (ISL), another for devices (port), and a third for devices issuing management server commands (MS). A security set is a set of up to three groups with no more than one of each group type.

  • Page 32: Edit Security Dialog

    Edit Security dialog Use the Edit Security dialog is to edit the security configuration on the switch. You can also open and edit a security configuration saved to a file. Editing security files consists of renaming and removing security sets, groups, and members. The Security dialogs are available only on a secure (SSL) fabric and on the entry switch (out of band switch).

  • Page 33: Create Security Set Dialog

    An empty (no members) security group in the active security set will prevent all connections for that security group type. For example, an empty ISL security group will cause the switch to refuse all logins from other switches. To add a security group to a security set, perform the following procedure: Click Security on the tool bar in the faceplate display or select Security >...

  • Page 34: Create Security Group Member Dialog

    Choose one of the following methods to open the Create a Security Group dialog: • Click a security set and click Security Group in the tool bar in the graphic window. • Right-click on a security set and select Create a Security Group from the popup menu. Enter a security group name and select a security group type (ISL, Port, or MS).

  • Page 35: Editing The Security Configuration On A Switch

    Enter the domain ID (97–127) for the switch for the ISL group member in the Binding field (ISL groups only). The WWN of the switch must be at the entered domain ID when attempting to enter the fabric, otherwise it will become isolated.

  • Page 36: Viewing Properties Of A Security Set, Group, Or Member

    The fabric binding feature must be enabled on all switches in the fabric. When enabling this feature, it is best to set the switch state to offline, enable the fabric binding feature on all switches, and then set the switch state to online.

  • Page 37: Archiving A Security Configuration To A File

    The read community string ("public") and write community string ("private") are set at the factory to these well-known defaults and should be changed if SNMP is enabled using the System Services or SNMP Properties dialogs.

  • Page 38: Enabling Snmp Configuration

    Information includes date and time, McDATA Web Server version, switch active firmware version, device hardware, drivers, and firmware version from FDMI. Select Fabric > Fabric Tracker to open the Fabric...

  • Page 39: Saving A Version Snapshot

    Enter an account (login) name and password. The factory account name and password are "admin" and "password". A password must have a minimum of 8 characters and no more than 20. The password is for the switch and is stored in the switch firmware. Refer to accounts.

  • Page 40: Removing A Fabric

    In these cases, you can delete switches and links to bring the display up to date. If you delete a switch or a link that is still active, the McDATA Web Server application will restore it automatically. You can also refresh the display. To delete a switch from the topology display, perform the following procedure: Select one or more switches in the topology display.

  • Page 41: Adding A New Switch To A Fabric

    Adding a new switch to a fabric If there are no special conditions to be configured for the new switch, simply plug in the switch and the switch becomes functional with the default fabric configuration. The default fabric configuration settings are: •...

  • Page 42: Displaying Fabric Information

    Open the faceplate display for the replacement switch. Select Switch > Restore. c. In the Restore dialog, enter the archive file from the failed switch or browse for the file. d. Click Restore. Reset the replacement switch to activate the configuration formerly possessed by the failed switch including the domain ID and the zoning database.

  • Page 43: Displaying The Event Browser

    The topology display uses switch and status icons to provide status information about switches, inter-switch links, and the Ethernet connection. The switch status icons, displayed on the left side of a switch, vary in shape and color. Switches controlled by an Ethernet Internet Protocol have a colored Ethernet icon displayed on the right side of the switch.

  • Page 44: Event Browser

    The maximum number of entries allowed in the Event Browser is 10,000. The maximum number of entries allowed on a switch is 1200. Once the maximum is reached, the event list wraps and the oldest events are discarded and replaced with the new events. Event entries from the switch, use the switch time stamp, while event entries generated by the application have a workstation time stamp.

  • Page 45: Sorting The Event Browser

    Events (alarms, critical, warning, and informative) generated by the application are not saved on the switch. They are permanently discarded when you close a McDATA Web Server session, but you can save these events to a file on the workstation before you close McDATA Web Server and read it later with a text editor or browser.

  • Page 46: Saving The Event Browser To A File

    The Devices data window displays information about devices (hosts and storage targets) connected to the switch. Click the Devices data window tab, in either the topology or faceplate display, to display device information for all devices that are logged into the selected fabric. To narrow the display to devices that are logged into specific switches, select one or more switches in the fabric tree or the topology display.

  • Page 47: Active Zone Set Data Window

    The Active Zoneset data window, shown in that resides on the fabric management switch. The active zone set is the same on all switches in the fabric – you can confirm this by adding a fabric through another switch and comparing Active Zone Set displays.

  • Page 48: Displaying Detailed Device Information

    To save device information to a file, open the topology display and perform the following procedure: Select one or more switches. If no switches are selected, devices information is gathered for all switches. Select Switch > Export Devices Information. Enter a file name in the Save dialog. Click Save.

  • Page 49: Creating A Nickname

    Select File > Import in the Nicknames dialog. Select an XML nickname file to import in the Open dialog. Click Open. Click Yes when prompted to overwrite existing nicknames. McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide ”Devices data ”Devices data window” on...

  • Page 50: Zoning A Fabric

    If EFCM or HAFM are used to manage the fabric, it is recommended to use EFCM or HAFM to manage the fabric zoning. If EFCM or HAFM are not used and other McDATA switch models are in the fabric, it is recommended to use SANpilot or Embedded Web Server to manage the fabric zoning.

  • Page 51: Zone Sets

    Zone sets A zone set is a named group of zones. A zone can be a member of more than one zone set. Each switch in the fabric maintains its own zoning database containing one or more zone sets. This zoning database resides in non-volatile or permanent memory and is therefore retained after a reset.

  • Page 52: Managing The Zoning Database

    Figure 25 To apply zoning to a fabric, choose a zone set and activate it. When you activate a zone set, the switch distributes that zone set and its zones, excluding aliases, to every switch in the fabric. This zone set is known as the active zone set.

  • Page 53: Edit Zoning Dialog Tool Bar Buttons And Icons

    You cannot edit an active zone set on a switch. You must configure an inactive zone set to your needs and then activate that updated zone set to apply the changes to the fabric. When you activate a zone set, the switch distributes that zone set to the temporary zoning database on every switch in the fabric.

  • Page 54: Configuring The Zoning Database

    The Interop Auto Save parameter determines whether changes to the active zone set that a switch receives from other switches in the fabric will be saved to the zoning database on that switch. Changes are saved when an updated zone set is activated. Zoning changes are always saved to temporary memory. However, if Interop Auto Save is enabled, the switch firmware saves changes to the active zone set in temporary memory and to the zoning database.

  • Page 55: Default Visibility

    It is recommended that all switches have the same Default Visibility setting. When default visibility is enabled (All, the default) on a switch, all ports on the switch can communicate with all ports on switches that also have Default Visibility enabled.

  • Page 56: Removing All Zoning Definitions

    When a zone set is activated, it is propagated and saved to temporary memory in each McDATA 4Gb SAN Switch in the fabric. If a McDATA 4Gb SAN Switch has the Interop Auto Save parameter enabled in the Zoning Config dialog, the zone set is saved to permanent memory on that switch.

  • Page 57: Activating And Deactivating A Zone Set

    You must activate a zone set to apply its zoning definitions to the fabric. Only one zone set can be active at one time. When you activate a zone set, the switch distributes that zone set to the temporary zoning database on every McDATA 4Gb SAN Switch in the fabric.

  • Page 58: Managing Zones

    When a zone set is activated, it is propagated and saved to temporary memory in each McDATA 4Gb SAN Switch in the fabric. If a switch has the Interop Auto Save parameter enabled in the Zoning Config dialog, the zone set is saved to permanent memory on that McDATA 4Gb SAN Switch. Refer to ”Configuring the zoning...

  • Page 59: Renaming A Zone Or A Zone Set

    The orphan zone set is created by the application automatically to hold the zones which are not in any set. The orphan zone set cannot be removed and is not saved on the switch. To remove a zone from a zone set, perform the following procedure: Select the zone to be removed in the Edit Zoning dialog.

  • Page 60: Managing Aliases

    NOTE: Changes that you make to the zoning database are limited to the managed switch and do not propagate to the rest of the fabric. To distribute changes to configured zone sets fabric wide, you must edit the zoning databases on the individual switches.

  • Page 61: Merging Fabrics And Zoning

    Merging fabrics and zoning If you join two fabrics with an inter-switch link, the active zone sets from the two fabrics attempt to merge automatically. The fabrics may consist of a single switch or many switches already connected together. The switches in the two fabrics attempt to create a new active zone set containing the union of each fabric's active zone set.
  • Page 62 Managing fabrics...

  • Page 63: Managing Switches

    Users with Admin authority can view and modify the switch and its configuration using McDATA Web Server. Users without Admin authority are limited to viewing switch status and configuration. The Images account is used to exchange files with the switch using FTP. The Images account can not be removed.

  • Page 64: Creating User Accounts

    Creating user accounts A switch can have a maximum of 15 user accounts. To create a new user account on a switch, perform the following procedure: Select Switch > User Accounts in the faceplate display to open the User Account Administration dialog.

  • Page 65: Removing A User Account

    To remove a user account on a switch, perform the following procedure: Select Switch > User Accounts in the faceplate display to open the User Account Administration dialog. Click the Remove Account tab to open the Remove Account tab page shown in Select the account (login) name from the list of accounts at the top of the dialog.

  • Page 66: Changing A User Account Password

    To change the password for an account on a switch, perform the following procedure: Select Switch > User Accounts in the faceplate display to open the User Account Administration dialog. Click the Change Password tab to open the Change Password tab page shown in Select the account (login) name from the list of accounts at the top of the dialog.

  • Page 67: Modifying A User Account

    To modify a user account on a switch, perform the following procedure: Select Switch > User Accounts in the faceplate display to open the User Account Administration dialog. Click the Modify Account tab to open the Modify Account tab page shown in Select the account (login) name from the list of accounts at the top of the dialog.

  • Page 68: Displaying Switch Information

    The fabric updates the topology and faceplate displays by forwarding changes in status to the management workstation as they occur. You can allow the fabric to update the switch status, or you can refresh the display at any time. To refresh switch status in the display, choose one of the following: •...

  • Page 69: Switch Data Window Entries

    McDATA Fabric Mode. The default is Standard. Legacy Address Format Not applicable Interop Auto Save Zoning auto save status. Saves zoning updates in temporary memory and the zoning database (True), or only in temporary memory (False). McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide...
  • Page 70 Fabric Binding is enabled. When Auto Save is disabled, any updates from remote switches will not be saved locally. If the local switch is reset, it may isolate. If enabled, the expected domain ID of a switch is required...

  • Page 71: Port Statistics Data Window

    Click the down arrow to open the drop-down list. Open the drop-down list and select Absolute to view the total count of statistics since the last switch reset. Select Rate to view the number of statistics counted per second over the polling period. Select Baseline to view the total count of statistics since the last time the baseline was set.

  • Page 72: Configured Zonesets Data Windows

    Configured Zonesets data windows The Configured Zonesets data window displays all zone sets, zones, aliases, and zone membership in the zoning database, shown in display to open the Configured Zonesets data window. Click the Active Zonesets data window tab in the topology display to view the active zone set in the Active Zonesets data window.

  • Page 73: Configuring Port Threshold Alarms

    Enter a value for the rising trigger. A rising trigger alarm is generated when the event count per interval exceeds the rising trigger. The switch will not generate another rising trigger alarm for that event until the count descends below the falling trigger and rises again above the rising trigger. Consider the...

  • Page 74: Paging A Switch

    The Date/Time and Network Time Protocol (NTP) dialog enables you to manually set the date, time, and time zone on a switch, or to enable the NTP Client to synchronize the date, time, and time zone on the switch with an NTP server. Enabling the NTP client ensures the consistency of date and time stamps in alarms and log entries.

  • Page 75: Resetting A Switch

    Resetting a switch reboots the switch using the switch configuration parameters last saved in permanent memory on the switch. Depending on the reset type, a switch reset may or may not include a Power On Self Test (POST) or it may or may not disrupt traffic.

  • Page 76: Configuring A Switch

    Switch Properties dialog Symbolic name The symbolic name is a user-defined name of up to 32 characters that identifies the switch. The symbolic name is used in the topology and faceplate displays, as well as many data windows to more easily identify switches.

  • Page 77: Switch Administrative States

    ID conflict in the fabric, the switch with the highest principal priority, or the principal switch, will reassign any domain ID conflicts and establish the fabric. If you lock the domain ID on a switch and a domain ID conflict occurs, one of the switches will isolate as a separate fabric and the Logged-In LEDs on both switches will flash to show the affected ports.

  • Page 78: Fabric Device Management Interface

    Locking the domain ID prevents the principal switch from assigning a domain ID when the switch is added to the fabric. In a fabric where the principal switch is an M-series director or edge switch, this is not an issue. In a fabric where the McDATA 4Gb SAN Switch may be the principal switch, changing from McDATA Fabric mode to Standard mode without configuring the valid ID range and locking it, may result in the switch domain ID being converted to a number not within the valid range.

  • Page 79: Broadcast Support

    Use the FDMI Enabled option on the Switch Properties dialog to enable or disable FDMI. If FDMI is enabled on an HBA, the HBA forwards information about itself to the switch when the HBA logs into the switch. If FDMI is enabled on a switch, the switch stores the HBA information in its FDMI database.

  • Page 80: Timeout Values

    The timeout values must be the same for all switches in the fabric. NOTE: Mismatched timeout values will disrupt the fabric. These should not be changed unless absolutely necessary. Therefore, the switch must be offline to change these values. Use the Switch Properties dialog to take the switch offline. Table 13...

  • Page 81: Security Consistency Checklist Dialog

    GUI Mgmt — allows out-of-band management of the switch from the switch management application (GUI). If disabled, the switch can not be specified as the entry switch for a fabric in the GUI, but can still be managed through an in-band connection.

  • Page 82: Network Properties

    Click OK to put any new values into effect. Figure 38 Network Properties dialog IP configuration The IP configuration identifies the switch on the Ethernet network and determines which network discovery method to use. Table 14 Table 14 IP configuration parameters...

  • Page 83: Remote Logging

    When enabled, the log entries are sent to the syslog host at the IP address that you specify in the Logging Host IP Address field. Log entries are saved in the internal switch log whether this feature is enabled or not.

  • Page 84: Snmp Configuration

    SNMP management server must be the same. The default is “public”. SNMP Proxy If enabled, you can use SNMP to monitor and configure any switch in the fabric Location Specifies the name (up to 64 characters) for the switch location. The default is “undefined”.

  • Page 85: Snmp Trap Configuration

    RADIUS Server information This archive file can be used to restore the configuration on the same switch or on a replacement switch. You can also use the archive file as a template for configuring new switches to add to a fabric. The archive can be used later to restore the switch.

  • Page 86: Restoring A Switch

    The switch archive must be compatible with the switch to be restored; that is, you can restore a McDATA 4Gb SAN Switch only with an archive from a McDATA 4Gb SAN Switch. Refer to NOTE: The switch being restored should be physically disconnected from the fabric.

  • Page 87: Restoring The Factory Default Configuration

    Reset Password File option in the maintenance menu. Refer to “Recovering a Switch Using Maintenance Mode” in the McDATA 4Gb SAN Switch for HP p-Class BladeSystem installation guide for your switch for information about maintenance mode and the maintenance menu.

  • Page 88: Downloading A Support File

    To install a PFE key, perform the following procedure: Add a fabric with the IP address of the switch on which you want to install the PFE key. Open the faceplate display of the switch on which you want to install the PFE key.

  • Page 89: Installing Firmware

    Web Server does this in one operation. To provide consistent performance throughout the fabric, ensure that all McDATA 4Gb SAN Switch for HP p-Class BladeSystem switches are running the same version of firmware. Verify that this version of firmware is compatible with the firmware of other McDATA switch models in the fabric.

  • Page 90: Using The Cli To Install Firmware

    (if any) are complete. When you need to do NDCLA/hotreset to multiple switches, only perform the NDCLA/hotreset on one switch at a time, and allow a 75 second wait before performing the NDCLA/hotreset operation on the next switch.

  • Page 91: Displaying Hardware Status

    • Power LED — indicates the voltage status of the switch. • Heartbeat LED — indicates the general status of the internal switch processor and the results of the POST. • System Fault LED — indicates an error, such as an over temperature condition, internal system error, voltage fault, or corrupt configuration.
  • Page 92 Managing switches...

  • Page 93: Managing Ports

    NOTE: External ports are numbered 0 and 9; internal ports are numbered 1–8. Figure 44 Faceplate display – port information Figure McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 44. The faceplate display...

  • Page 94: Monitoring Port Status

    E_Port Expansion port — the mode that a G_Port or GL_Port is in when attached by an ISL (inter-switch link) to another FC switch Displaying port operational states To display the operational state on each port in the faceplate display, select View > View Port States.

  • Page 95: Displaying Port Speeds

    Copper SFP, online (green) Copper SFP, offline (gray) None Empty port, no transceiver installed. This is normal for internal ports (1–8). Table 21 McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide Table 20 lists lists the port media states...

  • Page 96: Port Statistics Data Window

    Click the down arrow to open the drop-down list. Open the drop-down list and select Absolute to view the total count of statistics since the last switch or port reset. Select Rate to view the number of statistics counted per second over the polling period. Select Baseline to view the total count of statistics since the last time the baseline was set.
  • Page 97 Total LIPs Received Number of loop initialization primitive frames received Total LIPs Transmitted Number of loop initialization primitive frames transmitted Tx Offline Sequences Number of offline primitives transmitted by the port McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide...

  • Page 98: Port Information Data Window

    This value is persistent; it will be maintained during a switch reset, and will be used after a reset to set the port operational state. Indicates whether logged in or not E_Port connection status.
  • Page 99 The transceiver transmitter type, such as longwave, shortwave, electrical The maximum transceiver transmission distance The company that manufactured the SFP The IEEE registered company ID The part number assigned to the SFP Transceiver hardware version McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide...

  • Page 100: Configuring Ports

    Select a port in the faceplate display. Select Port > Port Properties to open the Port Properties dialog. The Port Properties dialog shows the switch name and the selected ports. Use the Port Properties dialogs to change the following parameters: •...

  • Page 101: Changing Port Speeds

    4Gbps Sets the transmission speed to 4-Gbps Changing port types The ports can be configured to self-discover the proper type to match the device or switch to which it is connected. Table 26 describes the port types. To change the port type, perform the following procedure: Select one or more ports in the faceplate display.

  • Page 102: Changing Port Symbolic Name

    Changing port symbolic name To change the symbolic name of a port from the faceplate display, perform the following procedure: Open the faceplate display and select a port. Select Port > Port Symbolic Name. In the Port Symbolic Name dialog, choose one of the following: •...
  • Page 103 To test another port, open the Select Port drop-down list and select another port (number) and test type (Internal, External, or Online) in the Test Selection area. Click Start Test to begin the next test. Observe the results in the Test Results area. McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 103...
  • Page 104 104 Managing ports...

  • Page 105: Command Line Interface

    Commands, page 108 Logging on to a 4Gb SAN Switch To log on to a switch using Telnet, open a command line window on the workstation and enter the Telnet command followed by the switch IP address: # telnet ip_address A Telnet window opens prompting you for a login.

  • Page 106: Working With Switch Configurations

    To modify a switch configuration you must open an Admin session with the Admin Start command. An Admin session prevents other accounts from making changes at the same time either through Telnet or McDATA Web Server. You must also open a Config Edit session with the Config Edit command and indicate which configuration you want to modify.

  • Page 107: Backing Up And Restoring Switch Configurations

    The Config Backup command creates a file on the switch, named configdata. This file can be used to restore a switch configuration only from the CLI; it cannot be used to restore a switch using McDATA Web Server.

  • Page 108: Commands

    Commands The command syntax is as follows: command operand operand [value] operand [value1] [value2] The command is followed by one or more operands. Consider the following rules and conventions: • Commands and operand are case insensitive. • Required operand values appear in standard font: [value]. Optional values are shown in italics: [value].
  • Page 109 Reset Security Securityset Set Config Set Log Set Port Set Setup Shutdown Test User Zone Zoneset Zoning McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 109 (110) (111) (113) (114) (116) (118) (121) (124) (125) (126) (127) (132)

  • Page 110: Admin Command

    Description Starts and ends an Admin session. The Admin session allows commands that change the fabric and switch configurations. Only one Admin session can be started on the switch at any time. An idle Admin session will time out after a period of time (the default is 30 minutes) which can be changed using the Set Setup System command.

  • Page 111: Alias Command

    • Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be 97–127; port numbers can be 0–-255. • 16-character hexadecimal world wide port name (WWPN) for the device with the format xx:xx:xx:xx:xx:xx:xx:xx. McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 111...
  • Page 112 rename [alias_old] [alias_new] Renames the alias given by [alias_old] to the alias given by [alias_new]. 112 Command Line Interface...

  • Page 113: Cim Command

    The following is an example of the CIM Limits command: McDATA4GbSAN #> cim limits Cim Attribute ------------- MaxListeners MaxSubscriptions MaxSubscriptionsPerListener See also CIMListener command, page 114 CIMSubscription command, page 116 Maximum ------- McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 113...

  • Page 114: Cimlistener Command

    CIMListener command Description Configures CIM indication service listeners and adds subscriptions to listeners. Refer to the CIMSubscription command for information about configuring subscriptions. Authority Admin session and a CIM Edit session. Refer to the CIM command for information about opening a CIM edit session.
  • Page 115 This configuration must be saved with the cim save command before it can take effect, or to discard this configuration use the cim cancel command. See also command, page 113 CIMSubscription command, page 116 [Permanent [10.0.0.1:5000] McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 115...

  • Page 116: Cimsubscription Command

    CIM subscription configuration parameters. Description Subscription name Event type for which the switch monitors and sends an indication to the CIM client. The event types are as follows: CreateComputerSystem — a switch is added to the fabric. This is the default.
  • Page 117 1 = Create:ComputerSystem 2 = Modify:ComputerSystem 3 = Delete:ComputerSystem 4 = Create:FCPort 5 = Modify:FCPort 6 = Delete:FCPort subscription_1 (see allowed options above) (decimal value, 0-720000 secs, 0=forever) [0 McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 117 [Create:ComputerSystem] [True...

  • Page 118: Config Command

    Config command Description Manages the FC configurations on a switch. For information about setting the port and switch configurations, refer to the Set Config command. Authority Admin session for all operands except List. Syntax config activate [config_name] backup cancel copy [config_source] [config_destination]...
  • Page 119 Restores configuration settings to an out-of-band switch from a backup file named configdata, which must be first uploaded on the switch using FTP. You create the backup file using the Config Backup command. Use FTP to load the backup file on a switch, then enter the Config Restore command.
  • Page 120 Please confirm (y/n): [n] y Alarm Msg: [day month date time year][A1005.0021][SM][Configuration is being restored - this could take several minutes !] Alarm Msg: [day month date time year][A1000.000A][SM][The switch will be reset in 3 seconds due to a config restore] McDATA4GbSAN (admin) #>...

  • Page 121: Create Command

    If your workstation has an FTP server, you can proceed with the command prompts to send the file from the switch to a remote host. Otherwise, you can use FTP to download the support file from the switch to your workstation. The support file is useful to technical support personnel for troubleshooting switch problems.
  • Page 122 When prompted to send the support file to another machine, decline, then close the Telnet session. Open an FTP session on the switch and log in with the account name “images” and password “images”. Transfer the dump_support.tgz file in binary mode with the Get command.
  • Page 123 See also Date command, page 124 command, page 154 Set Setup command, page 170 McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 123...

  • Page 124: Date Command

    Set Setup command, System operand, for information about NTP. When setting the date and time on a switch that is enabled for SSL connections, the switch time must be within 24 hours of the workstation time. Otherwise, the connection will fail.

  • Page 125: Feature Command

    Feature command Description Adds Product Feature Enablement (PFE) key features to the switch and displays the PFE key log. A Product Feature Enablement (PFE) key is a password that you can purchase from your switch distributor or authorized reseller to enable particular features in your switch. The SANtegrity Enhanced PFE key enables device security on the switch.

  • Page 126: Firmware Install Command

    Firmware Install command Description Downloads firmware from a remote host to the switch, installs the firmware, then resets the switch (without a POST) to activate the firmware. This command is disruptive, and prompts you for the following: • IP address of the remote host •...

  • Page 127: Group Command

    ISL group member. The string has the following lengths depending on the Primary Hash function: • • respectively. The group name and group type attributes are read-only MD5 hash: 16-byte SHA-1 hash: 20-byte McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 127 Table...
  • Page 128 • SHA-1 hash: 20-byte Description Port World Wide Name for the N_Port device that would attach to the switch. A member cannot belong to more than one group. Enables (CHAP) or disables (None) authentication using Challenge Handshake Authentication Protocol. The default is None.
  • Page 129 Hex string that is encrypted by the Secondary Hash and sent for authentication. The string has the following lengths depending on the Secondary Hash function: MD5 hash: 16-byte SHA-1 hash: 20-byte McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 129 Table...
  • Page 130 MD5 hash: 16-byte SHA-1 hash: 20-byte Domain ID of the switch to which to bind the ISL group member World Wide Name. This option is available only if FabricBindingEnabled is set to True using the Set Config Security command. 0 (zero) specifies no binding.
  • Page 131 (40 hex or 20 ASCII char value) [ (MD5 / SHA-1 / None) (32 hex or 16 ASCII char value) [ (domain ID 97-127, 0=None) McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 131 [None] chap [MD5 ]...

  • Page 132: Hardreset Command

    Hardreset command Description Resets the switch and performs a POST. This reset disrupts traffic, activates the pending firmware, and clears the alarm log. To save the alarm log before resetting, refer to the Set Log command. Authority Admin session Syntax hardreset Notes To reset the switch without a POST, refer to the Reset command.

  • Page 133: Help Command

    Admin mode is required for this command. Usage: config edit [CONFIG_NAME] { activate | backup | cancel edit | list | restore McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 133 | copy | delete | save }...

  • Page 134: History Command

    Enter ![partial command string] to re-execute a command that matches the command string. • Enter !! to re-execute the most recent command. Examples The following is an example of the History command: McDATA4GbSAN #> history 1 show switch 2 date 3 help set 4 history McDATA4GbSAN #> !3...

  • Page 135: Hotreset Command

    Authority Admin session Syntax hotreset Notes You can load and activate firmware on an operating switch without disrupting data traffic or having to re-initialize attached devices under the following conditions: • The current firmware version is a version that supports upgrading to the new version •...

  • Page 136: Image Command

    [account_name] [ip_address] [file_source] [file_destination] Retrieves image file given by [file_source] and stores it on the switch with the file name given by [file_destination]. The image file is retrieved from the FTP server with the IP address given by [ip_address] and an account name given by [account_name].
  • Page 137 Open an Admin session to acquire the necessary authority. McDATA4GbSAN $>admin start 10.Display the list of firmware image files on the switch to confirm that the file was loaded. McDATA4GbSAN (admin) $>image list 11.Unpack the firmware image file to install the new firmware in flash memory.
  • Page 138 Firmware Install command, page 126 138 Command Line Interface Warning: Installing new firmware requires a switch reset. Continuing with this action will terminate all management sessions, including any Telnet sessions. When the firmware activation is complete, you may log in to the switch again.

  • Page 139: Lip Command

    Authority Admin session Syntax lip [port_number] Operands [port_number] The number of the port to be re-initialized. Examples The following is an example of the Lip command: McDATA4GbSAN (admin) #> lip 2 McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 139...

  • Page 140: Passwd Command

    Passwd command Description Changes a user account’s password. Authority Admin account name and an Admin session to change another account’s password. You can change you own password without an Admin session. Syntax passwd [account_name] Operands [account_name] The user account name. To change the password for an account name other than your own, you must open an Admin session with the account name Admin.

  • Page 141: Ping Command

    Ping command Description Initiates an attempt to communicate with another switch over an Ethernet network and reports the result. Authority None Syntax ping [ip_address] Operands [ip_address] The IP address of the switch to query. Broadcast IP addresses, such as 255.255.255.255, are not valid.

  • Page 142: Ps Command

    Ps command Description Displays current system process information. Authority None Syntax Examples The following is an example of the Ps command: McDATA4GbSAN #> ps PPID %CPU 142 Command Line Interface TIME ELAPSED COMMAND 0.0 00:00:00 3-01:18:35 cns 0.0 00:00:01 3-01:18:35 ens 0.0 00:00:21 3-01:18:35 dlog 0.1 00:05:35...

  • Page 143: Quit Command

    Quit command Description Closes the Telnet session. Authority None Syntax quit, exit, or logout Notes You can also press Control+D to close the Telnet session. McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 143...

  • Page 144: Reset Command

    Resets the configuration given by [config_name] to the factory default values for switch, port, port threshold alarm, and zoning configuration as described in [config_name] does not exist on the switch, a configuration with that name will be created. If you omit [config_name], the active configuration is reset. You must activate the configuration for the changes to take effect.
  • Page 145 Internal ports: 2-Gbps External ports: Auto Internal ports: FL External ports: GL Port n, where n is the port number False True False False True McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 145 Table 42 for system...
  • Page 146 Table 36 Port configuration defaults (continued) Parameter AutoPerfTuning LCFEnable MFSEnable VIEnable MSEnable NoClose PDISCPingEnable Enter Show Config Threshold command to display threshold alarm configuration values. Table 37 Port threshold alarm configuration defaults Parameter ThresholdMonitoringEnabled CRCErrorsMonitoringEnabled RisingTrigger FallingTrigger SampleWindow DecodeErrorsMonitoringEnabled RisingTrigger FallingTrigger SampleWindow ISLMonitoringEnabled...
  • Page 147 <syscontact undefined> <sysLocation undefined> McDATA 4Gb SAN Switch Trap 1: 10.0.0.254; Traps 2–5: 0.0.0.0 Warning False 1.3.6.1.4.1.1663.1.1.1.1.37 False True Default Local Local False False False 10.0.0.1 1812 2 seconds False McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 147...
  • Page 148 Enter the Show Setup Services command to display switch service configuration values. Table 41 Services configuration defaults Parameter TelnetEnabled SSHEnabled GUIMgmtEnabled SSLMgmtEnabled EmbeddedGUIEnabled SNMPEnabled NTPEnabled CIMEnabled FTPEnabled MgmtServerEnabled Enter the Show Setup System command to display system configuration values. Table 42...

  • Page 149: Security Command

    Security command Description Opens a Security Edit session in which to manage the security database on a switch. Refer to the Group command and the Securityset command. IMPORTANT: This command is available only with the SANtegrity Enhanced PFE key. Authority Admin session. The operands Active, History, Limits, and List are available without an Admin session.
  • Page 150 save Saves the changes that have been made to the security database during a Security Edit session. Changes you make to any security set will not take effect until you activate that security set. Refer to the Securityset command for information about activating a security set. Examples The following is an example of the Security Active command: McDATA4GbSAN #>...
  • Page 151 Authentication Chap Primary Hash Primary Secret ******** Secondary Hash SHA-1 Secondary Secret ******** Binding 10:00:00:00:00:10:21:17 Authentication Chap Primary Hash Primary Secret ******** Secondary Hash SHA-1 Secondary Secret ******** Binding McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 151...

  • Page 152: Securityset Command

    Securityset command Description Manages security sets in the security database. NOTE: This command is available only with the SANtegrity Enhanced PFE key. Authority Admin session and a Security Edit session. Refer to the Security command for information about starting a Security Edit session. The Active, Groups, and List operands are available without an Admin session.
  • Page 153 The following is an example of the Securityset List command McDATA4GbSAN #> securityset list Current list of SecuritySets ---------------------------- alpha beta See also Group command, page 127 Security command, page 149 Remote day month date time year McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 153...

  • Page 154: Set Command

    [option] Sets port state and speed for the specified port. The previous Set Config Port settings are restored after a switch reset, port reset, or a reactivation of a switch configuration. Refer to the Set Port command. 154 Command Line Interface...
  • Page 155 Changes SNMP and system configuration settings. Refer to the Set Setup command. switch [state] Changes the administrative state for all ports on the switch to the state given by [state]. The previous Set Config Switch settings are restored after a switch reset or a reactivation of a switch configuration.

  • Page 156: Set Config Command

    Description Sets switch, port, port threshold alarm, security, and zoning configuration parameters. The changes you make with this command are not retained when you reset or power cycle the switch unless you save them using the Config Save command. Refer to the Config command.
  • Page 157 “external”. If you omit [port_type], all ports are changed. For each parameter, enter a new value or press Enter to accept the current value shown in brackets. Press q to end the configuration. Table 44 describes the port parameters. McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 157...
  • Page 158 Enables (True) or disables (False) the configuration and enforcement of fabric binding on all switches the fabric. Fabric binding associates switch World Wide Names with a domain ID in the creation of ISL groups. Enables (True) or disables (False) the saving of changes to active...
  • Page 159 McDATA switches in Open Fabric Mode. This is the default. • Use the McDATA Fabric Mode to connect to McDATA switches in McDATA Fabric Mode. McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 159 Table 46 describes the Set...
  • Page 160 Falling Trigger Sample Window 160 Command Line Interface Table 47 describes the Set Config Threshold parameters. The switch will down a Description Master enable/disable parameter for all events. Enables (True) or disables (False) the generation of all enabled event alarms.
  • Page 161 Enables (True) or disables (False) the discarding of the active zone set when a new zone set is activated from another switch. The default is True. McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 161 Table 48 describes the zoning...
  • Page 162 Examples The following is an example of the Set Config Port command: McDATA4GbSAN #> admin start McDATA4GbSAN (admin) #> config edit McDATA4GbSAN (admin-config) #> set config port 0 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.
  • Page 163 (decimal value, 100-100000 msec) E_D_TOV (decimal value, 10-20000 msec) PrincipalPriority (decimal value, 1-255) ConfigDescription (string, max=64 chars) InteropMode (0=Standard, 1=McData Fabric Mode) McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 163 [Online [True [True [True [1000 [False [4Gb SAN Switch] [10000...
  • Page 164 The following is an example of the Set Config Threshold command: McDATA4GbSAN #> admin start McDATA4GbSAN McDATA4GbSAN (admin-config) #> set config threshold A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.
  • Page 165 To discard this configuration use the config cancel command. See also Config command, page 118 (True / False) [True ] (All / None) [None ] (True / False) [False] (True / False) [False] McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 165...

  • Page 166: Set Log Command

    Description Specifies the events to record in the event log and display on the screen. You determine what events to record in the switch event log using the Component, Level, and Port operands. You determine what events are automatically displayed on the screen using the Display operand. Alarms are always displayed on the screen.
  • Page 167 Saves the log settings for the component, severity level, port, and display level. These settings remain in effect after a switch reset. The log settings can be viewed using the Show Log Settings command. To export log entries to a file, use the Set Log Archive command.
  • Page 168 Notes In addition to critical, warn, and informative severity levels, the highest event severity level is alarm. The alarm level describes events that are disruptive to the administration or operation of a fabric and require administrator intervention. Alarms are always logged and always displayed on the screen. 168 Command Line Interface...

  • Page 169: Set Port Command

    Set Port command Description Sets port state and speed for the specified port temporarily until the next switch reset or new configuration activation. This command also clears port counters. Authority Admin session except for the Clear operand. Syntax set port [port_number]...

  • Page 170: Set Setup Command

    Set Setup command Description Manages configuration settings for Remote Authentication Dial-In User Service (RADIUS) servers, switch services, SNMP, and system configurations. Authority Admin session Syntax set setup radius services snmp system Operands radius Prompts you in a line-by-line fashion to configure RADIUS servers for user account and device authentication.
  • Page 171 RADIUS server. services Prompts you in a line-by-line fashion to enable or disable switch services. switch service parameters. For each parameter, enter a new value or press Enter to accept the current value shown in brackets. NOTE: Use caution when disabling TelnetEnabled and GUIMgmtEnabled;...
  • Page 172 RADIUS server authentication order must be local. Enables (True) or disables (False) the McDATA Web Server web applet. The web applet enables you to point at a switch with an internet browser and run McDATA Web Server through the browser.
  • Page 173 Enables (True) or disables (False) the generation of traps in response to trap authentication failures. The default is False. ProxyEnabled Enables (True) or disables (False) SNMP communication with other switches in the fabric. The default is True. McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 173 Table 51 describes...
  • Page 174 Enables (True) or disables (False) the saving of log information on the switch. The default is True. Enables (True) or disables (False) the recording of the switch event log on a remote host that supports the syslog protocol. The default is False.
  • Page 175 (True / False) [True ] (True / False) [False] (True / False) [True ] (True / False) [True ] (True / False) [True ] McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 175 [10.20.11.8] [1812 [True [True [False [False [********...
  • Page 176 The following is an example of the Set Setup SNMP command: McDATA4GbSAN #> admin start McDATA4GbSAN (admin) #> set setup snmp A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.
  • Page 177 LocalLogEnabled RemoteLogEnabled RemoteLogHostAddress NTPClientEnabled NTPServerAddress EmbeddedGUIEnabled McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 177 (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp) (dot-notated IP Address) (dot-notated IP Address) (dot-notated IP Address) (dec value 0-1440 minutes, 0=never) (dec value 0-1440 minutes, 0=never)

  • Page 178: Show Command

    [option] Displays the alarm log and session display setting. If you omit [option], the command displays the last 200 alarm entries. The alarm log is cleared when the switch is reset or power cycled. [option] has the following value:...
  • Page 179 Illegal characters in the display appear as question marks (?). interface Displays the status of the active network interfaces. log [option] Displays log entries. Refer to the Show Log command. The log is cleared when the switch is reset or power cycled. lsdb Displays Link State database information.
  • Page 180 A loss of signal causes the switch to attempt to re-establish the link. If the link is not re-established, a link failure is counted. A link reset is performed after a link failure.
  • Page 181 Displays setup attributes for the system, SNMP, and the switch manufacturer. Refer to the Set Setup command. steering [domain_id] Displays the routes that data takes to the switch given by [domain_id]. If you omit [domain_id], the system displays routes for all switches in the fabric. support Executes a series of commands that display a complete description of the switch, its configuration, and operation.
  • Page 182 • Show (About, Alarm, Backtrace, Chassis, Config Port, Config Security, Config Switch, Config Threshold, Dev, Dev Settings, Domains, Fabric, Log, Log Archive, Log Settings, Lsdb, Mem, Ns, Perf, Port, Setup Mfg, Setup Snmp, Setup System, Steering, Switch, Topology, Users) • Uptime •...
  • Page 183 WWN = 10:00:00:60:69:50:0b:6c WWN = 10:00:00:c0:dd:00:b8:b7 Enet IP Addr ------------ PortID Manufacturer ------ --------------- QLogic Corporation QLogic Corporation McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 183 FC IP Addr SymbolicName ---------- ------------ 0.0.0.0 gui sb1 .11 0.0.0.0 sw12 0.0.0.0 sw .160...
  • Page 184 The following is an example of the Show FDMI WWN command: McDATA4GbSAN #> show fdmi 21:00:00:e0:8b:09:3b:17 FDMI Information ---------------- Manufacturer SerialNumber Model ModelDescription PortID NodeWWN HardwareVersion DriverVersion OptionRomVersion FirmwareVersion OperatingSystem MaximumCTPayload NumberOfPorts Port 21:01:00:e0:8b:27:aa:bc SupportedFC4Types SupportedSpeed CurrentSpeed MaximumFrameSize OSDeviceName HostName The following is an example of the Show NS (local domain) command: McDATA4GbSAN #>...
  • Page 185 DecodeErrors EpConnects FBusy FlowErrors FReject InvalidCRC InvalidDestAddr 0 LIP_AL_PD_AL_PS 0 LIP_F7_AL_PS LIP_F7_F7 McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 185 HWaddr 00:C0:DD:00:BD:ED Bcast:10.20.68.255 Mask:255.255.255.0 MTU:1500 Metric:1 TX bytes:716751 (699.9 Kb) Mask:255.0.0.0 MTU:16436 Metric:1 TX bytes:20116 (19.6 Kb)
  • Page 186 The following is an example of the Show Switch command: McDATA4GbSAN #> show switch Switch Information ------------------ SymbolicName SwitchWWN BootVersion CreditPool DomainID FirstPortAddress FlashSize - MBytes LogFilterLevel MaxPorts NumberOfResets ReasonForLastReset ActiveImageVersion - build date PendingImageVersion - build date ActiveConfiguration AdminState...
  • Page 187 196 620100 50:05:08:b2:00:7b:a7:e2 50:05:08:b2:00:7b:a7:e0 0.0.0.0 McDATA 4Gb SAN Switch 10.20.94.50 (use 'set setup system' to update) 00:c0:dd:07:12:1b 10:00:08:00:88:e0:aa:b5 McDATA4GbSAN V5.2.0.19.6 Mon Mar 28 03:26:05 2005 Passed McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 187 (CLISH)

  • Page 188: Show Config Command

    Show Config command Description Displays switch, port, alarm threshold, security, and zoning for the current configuration. Authority None Syntax show config port [port_number] security switch threshold zoning Operands port [port_number] Displays configuration parameters for the port number given by [port_number]. External ports are numbered 0 and 9;...
  • Page 189 FallingTrigger SampleWindow LoginMonitoringEnabled RisingTrigger FallingTrigger SampleWindow LogoutMonitoringEnabled RisingTrigger FallingTrigger SampleWindow LOSMonitoringEnabled RisingTrigger FallingTrigger SampleWindow McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 189 Online True True True 1000 98 (0x62) False McDATA4GbSAN 10000 2000 Default Config Initial Initial...
  • Page 190 The following is an example of the Show Config Zoning command: McDATA4GbSAN #> show config zoning Configuration Name: default ------------------- Zoning Configuration Information -------------------------------- InteropAutoSave DefaultVisibility DefaultZone DiscardInactive See also Set Config command, page 156 190 Command Line Interface True None False False...

  • Page 191: Show Log Command

    Monitor none of the component events Other Monitors other miscellaneous events Port Monitors all port events SNMP SNMP events Switch Monitors switch management events Zoning Monitors zoning conflict events McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 191...
  • Page 192 Current settings for log ------------------------ FilterComponent The following is an example of the Show Log Level command: McDATA4GbSAN #> show log level Current settings for log ------------------------ FilterLevel DisplayLevel 192 Command Line Interface NameServer MgmtServer Zoning Switch Blade Port Eport Snmp Info Critical...
  • Page 193 [335][day month date time year][I][Eport Port: 0/8][LSDB Xchg timer set] [336][day month date time year][I][Eport Port: 0/8][Setting attribute Oper.UserPort.0.8.EpConnState Connected] See also Set Log command, page 166 Critical,Warn,Info,None Critical,Warn,Info,None McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 193...

  • Page 194: Show Perf Command

    Show Perf command Description Displays port performance in frames/second and bytes/second. If you omit the operand, the command displays data transmitted (out), data received (in), and total data transmitted and received in frames/second and bytes per second. Authority None Syntax show perf byte inbyte...
  • Page 195 The following is an example of the Show Perf Byte command: McDATA4GbSAN #> show perf byte Displaying bytes/sec (total)... ------------------------------------------------- McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 195 (Press any key to stop display) 818K 0 733K 0...

  • Page 196: Show Setup Command

    Description Displays the current SNMP and system settings. Authority None Syntax show setup radius services snmp system Operands Displays manufacturing information about the switch. radius Displays RADIUS server information. services Displays switch service status information. snmp Displays the current SNMP settings. system Displays the current system settings.
  • Page 197 Trap4Port Trap4Severity Trap4Version Trap4Enabled Trap5Address Trap5Port Trap5Severity Trap5Version Trap5Enabled ObjectID AuthFailureTrap ProxyEnabled McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 197 True <sysContact undefined> System Lab McDATA 4Gb SAN Switch 10.0.0.254 warning False 0.0.0.0 warning False 0.0.0.0 warning False 0.0.0.0...
  • Page 198 The following is an example of the Show Setup System command: McDATA4GbSAN #> show setup system System Information ------------------ Eth0NetworkDiscovery Eth0NetworkAddress Eth0NetworkMask Eth0GatewayAddress AdminTimeout InactivityTimeout LocalLogEnabled RemoteLogEnabled RemoteLogHostAddress NTPClientEnabled NTPServerAddress EmbeddedGUIEnabled See also Set Setup command, page 170 198 Command Line Interface Static 10.20.92.246 255.255.255.0...

  • Page 199: Shutdown Command

    Shutdown command Description Terminates all data transfers on the switch at convenient points and closes the Telnet session. Always power cycle the switch after entering this command. Authority Admin session Syntax shutdown McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 199...

  • Page 200: Test Command

    The port being tested must be online and connected to a remote device. The port passes if the test frame that was sent by the switch matches the frame that is received. This test does not disrupt communication on the port. This test is valid for all ports. External ports are numbered 0 and 9;...
  • Page 201 See also command, page 154 (decimal value, 1-4294967295) (decimal value, 36-2148) (32-bit hex value or 'Default') [Default] (True/False) McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 201 [100 [256 [False...

  • Page 202: Uptime Command

    Uptime command Description Displays the elapsed up time since the switch was last reset and reset method. A hot reset or non-disruptive firmware activation does not reset the elapsed up time reported by this command. Authority None Syntax uptime Examples The following is an example of the Uptime command: McDATA4GbSAN #>...

  • Page 203: User Command

    Operands accounts Displays all user accounts that exist on the switch. This operand is available to all account names without an Admin session. Add a user account to the switch. You will be prompted for an account name, a password, authority, and an expiration date.
  • Page 204 The following is an example of the User Add command: McDATA4GbSAN (admin) #> user add Press 'q' and the ENTER key to abort this command. account name (1-15 chars) account password (8-20 chars) please confirm account password: ******* set account expiration in days (0-2000, 0=never): [0] 100 should this account have admin authority? (y/n): [n] y OK to add user account 'user1' with admin authority and to expire in 100 days?

  • Page 205: Whoami Command

    Authority None Syntax whoami Examples The following is an example of the Whoami command: McDATA4GbSAN #> whoami User name Switch name Switch domain ID: 21 (0x15) : admin@session2 : McDATA4GbSAN McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 205...

  • Page 206: Zone Command

    Zone command Description Manages zones and zone membership on a switch. Authority Admin session and a Zoning Edit session. Refer to the Zoning command for information about starting a Zoning Edit session. The List, Members, and Zonesets operands are available without an Admin session.
  • Page 207 Examples The following is an example of the Zone List command: McDATA4GbSAN #> zone list Zone ZoneSet ------------------- wwn_b0241f zone_set_1 wwn_23bd31 zone_set_1 wwn_221416 zone_set_1 wwn_2215c3 zone_set_1 wwn_0160ed zone_set_1 wwn_c001b0 zone_set_1 wwn_401248 zone_set_1 wwn_02402f zone_set_1 wwn_22412f zone_set_1 McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 207...
  • Page 208 The following is an example of the Zone Members command: McDATA4GbSAN #> zone members wwn_b0241f Current List of Members for Zone: wwn_b0241f --------------------------------- 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2f The following is an example of the Zone Zonesets command: McDATA4GbSAN #> zone zonesets zone1 Current List of ZoneSets for Zone: zone1 ---------------------------------- zone_set_1...

  • Page 209: Zoneset Command

    [zone_set_old] [zone_set_new] Renames the zone set given by [zone_set_old] to the name given by [zone_set_new]. You can rename the active zone set. McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 209...
  • Page 210 zones [zone_set] Displays all zones that are components of the zone set given by [zone_set]. This operand does not require an Admin session. Notes • A zone set must be active for its definitions to be applied to the fabric. •...

  • Page 211: Zoning Command

    • Time of the most recent zone set activation or deactivation and the user who performed it • Time of the most recent modifications to the zoning database and the user who made them. • Checksum for the zoning database McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 211...
  • Page 212 Displays the number of zone sets, zones, aliases, members per zone, members per alias, and total members in the zoning database. This operand also displays the switch zoning database limits, excluding the active zone set, which are described in require an Admin session.
  • Page 213 ------- MaxZoneSets MaxZones 2000 MaxAliases 2500 MaxTotalMembers 10000 MaxZonesInZoneSets 2000 MaxMembersPerZone 2000 MaxMembersPerAlias 2000 McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 213 Current [Zoning Name] ------- ------------- 166f D_1_JBOD_1 D_1_Photons D_2_JBOD1 D_2_NewJBOD_2 E1JBOD1 E2JBOD2 LinkResetZone LinkResetZone2 NewJBOD1...
  • Page 214 The following is an example of the Zoning Limits command: McDATA4GbSAN #> zoning limits Zoning Attribute ---------------- MaxZoneSets MaxZones MaxAliases MaxTotalMembers MaxZonesInZoneSets MaxMembersPerZone MaxMembersPerAlias 214 Command Line Interface Maximum Current [Zoning Name] ------- ------- ------------- 2000 2500 10000 166f 2000 2000 D_1_JBOD_1 D_1_Photons...
  • Page 215 209 ZoneMember 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2f 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:23:bd:31 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:22:14:16 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:22:15:c3 ZoneMember 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2f 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:23:bd:31 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:22:14:16 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:22:15: McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 215...
  • Page 216 216 Command Line Interface...

  • Page 217: Glossary

    A port LED that indicates when frames are entering or leaving the port Administrative state State that determines the operating state of the port, I/O blade, or switch. The configured administrative state is stored in the switch configuration. The configured administrative state can be temporarily overridden using the Command Line Interface (CLI).
  • Page 218 Logged-in LED A port LED that indicates device login or loop initialization status Maintenance button Formerly known as the Force PROM button. Momentary button on the switch used to reset the switch or place the switch in maintenance mode. Maintenance mode Formerly known as force PROM mode.
  • Page 219 A set of zones grouped together. The active zone set defines the zoning for a fabric. Zoning database The set of zone sets, zones, and aliases stored on a switch McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 219...

  • Page 221: Index

    Secure Socket Layer security contact conventions document text symbols CRC error Create command current administrative state data window Active Security Active Zoneset Configured Zonesets description Devices Port Information Port Statistics McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 221...
  • Page 222 Devices data window disk space document conventions prerequisites related documentation documentation, HP web site domain ID binding description display lock Dynamic Host Configuration Protocol E_Port isolation embedded GUI service Error Detect Timeout event browser filter...
  • Page 223 NDCLA - See Non-Disruptive Code Load and Activation network configuration reset discovery gateway address interfaces IP address mask properties Network Time Protocol client description interaction with Date command server address McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 223...
  • Page 224 Port Information data window Port Statistics data window port/device tree Power LED Power On Self Test log prerequisites principal switch processor Product Feature Enablement key properties network port Ps command Quit command RADIUS - See Remote Authentication Dial-In User Service...
  • Page 225 System Fault LED system services technical support, HP Telnet service session timeout Test command testing ports text symbols time time zone timeout Admin session McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 225...
  • Page 226 User command version snapshot compare export save Virtual Interface preference routing web server service web sites HP documentation HP storage HP Subscriber’s choice Whoami command wizard configuration working directory status indicator workstation requirements write community zone add member port copy...

Table of Contents