hit counter code
HP Vectra VE 5/series 2 User Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Desktop
  5. Vectra VE5 2
  6. User manual
HP Vectra VE 5/series 2 User Manual

HP Vectra VE 5/series 2 User Manual

Hewlett-packard personal computer user's guide
Hide thumbs Also See for Vectra VE 5/series 2:
Table of Contents

Advertisement

Quick Links

Download this manual
HP Vectra User's Guide

Advertisement

Table of Contents
loading

Related Manuals for HP Vectra VE 5/series 2

Summary of Contents for HP Vectra VE 5/series 2

  • Page 1 HP Vectra User’s Guide...

  • Page 2: Table Of Contents

    Table of Contents WELCOME TO YOUR HP VECTRA PC 1 SETTING UP YOUR PC UNPACKING YOUR PC CONNECTING THE DISPLAY, MOUSE, AND KEYBOARD CONNECTING TO A NETWORK CONNECTING A PRINTER CONNECTING AUDIO ACCESSORIES CONNECTING A SCSI ACCESSORY CONNECTING THE POWER CORDS...
  • Page 3 IF YOU CAN’T START THE SETUP PROGRAM IF THE DATE AND TIME ARE INCORRECT IF YOUR PC HAS AN AUDIO PROBLEM IF THE CD-ROM DRIVE HAS A PROBLEM USING THE HP SETUP PROGRAM STARTING THE SETUP PROGRAM UNDERSTANDING THE SETUP PROGRAM USING THE SCSISELECT UTILITY...
  • Page 4 HP BBS LIBRARY INTERNET—FTP LIBRARY SERVICE ACCESS HP WORLD WIDE WEB SITE HP FAXBACK ON DEMAND—HP FIRST HP AUDIO TIPS (USA ONLY) HP AUTOMATED SUPPORT DIRECTORY 156 ORDERING DRIVERS AND BIOS ON DISKETTE{XE "DRIVERS"}{XE "BIOS"} HP SUPPORT SERVICES HEWLETT-PACKARD TELEPHONE SUPPORT...
  • Page 5 7 REGULATORY INFORMATION AND WARRANTY 168 REGULATORY INFORMATION FCC (FOR USA ONLY) HP HARDWARE WARRANTY HP SOFTWARE PRODUCT LICENSE AGREEMENT AND SOFTWARE & PRODUCT LIMITED WARRANTY...

  • Page 6: Welcome To Your Hp Vectra Pc

    System BIOS and Video BIOS stored in Flash ROMs (for easy upgradeability) • BIOS support for ISA “Plug and Play” accessory board configuration • Optimized for 32-bit operating systems. NOTE The advanced processor installed in your HP Vectra PC provides the best performance when used with 32-bit operating systems and applications.

  • Page 7: Setting Up Your Pc

    SETTING UP YOUR PC This chapter leads you through the first time installation of your HP Vectra PC. UNPACKING YOUR PC When you receive your PC, unpack all of the components: • the computer and power cords • the display and its video cable •...

  • Page 8: Connecting The Display, Mouse, And Keyboard

    Position the PC so that its rear connectors are easily accessible. Place the display next to the computer. Installation Tools No tools are required to install your PC. However, if you plan to install a disk drive or an accessory board inside your PC, you will need a flat-blade screwdriver. See chapter 3, How to Install Accessories Inside Your PC , for more information on installing accessories.

  • Page 9: Connecting To A Network

    CONNECTING TO A NETWORK The LAN Adapter installed in your PC may have two RJ-45 connectors (one for 100-Mbit/s operation and one for 10-Mbit/s operation) or one RJ-45 connector (supporting both 100-Mbit/s and 10-Mbit/s). The LAN Adapter can automatically detect which connector or network type is being used. Connect the RJ-45 plug on your network cable to the 100-Mbit/s or 10-Mbit/s LAN connector on the LAN Adapter as appropriate for your network type.

  • Page 10: Connecting A Printer

    Let your Network Administrator know you are connecting your PC to the network. Refer to the online Network Administrator Guide (provided with the disk kit) for instructions on setting up your PC for a LAN connection. CONNECTING A PRINTER If you have a printer, connect its cable to the back of the computer and tighten the attachment screws.

  • Page 11: Connecting Audio Accessories

    CONNECTING AUDIO ACCESSORIES Your PC has a Headphones jack and a Microphone jack on the front panel. An audio Stereo In jack, an audio Stereo Out jack, and a MIDI interface connector are located on the rear panel. WARNING: CONNECTING A SCSI ACCESSORY Note that Ultra SCSI mode is disabled automatically when an external SCSI accessory is connected to your PC.
  • Page 12 NOTE: You don’t need to set a SCSI address for Plug and Play SCSI devices (SCSI devices which support the SCAM protocol). Connect the SCSI accessory to your PC’s external SCSI connector with a shielded SCSI cable. (Note that Ultra SCSI is automatically disabled when an external SCSI accessory is connected.) Make sure the SCSI accessory is terminated correctly—either internally or by a terminating resistor (refer to the manual provided with the SCSI accessory).

  • Page 13: Connecting The Power Cords

    Contact your dealer to order shielded HP SCSI cables to connect external SCSI accessories. You should not have to change the voltage selection switch setting if the computer was ordered from HP with the correct localization option for your country. If the voltage...
  • Page 14 Display Power Connector Connect the display’s power cord and the computer’s power cord to grounded outlets. WARNING: For your safety, always connect the equipment to a grounded wall outlet. Always use a power cord with a properly grounded plug, such as the one provided with this equipment, or one in compliance with your national regulations.

  • Page 15: Starting And Stopping Your Pc

    STARTING AND STOPPING YOUR PC Starting Your PC Press the power button on the display. Press the power button on the PC. The PC performs a power-on self-test. If an error is detected, a message is displayed. Follow the instructions provided to correct the error. NOTE If a Password has been set in the PC’s Setup program, the power-on prompt appears when you switch on the PC.
  • Page 16 When your PC has started: • Adjust the display screen’s brightness and contrast to your needs. If the picture does not fill the screen or is not centered refer to the display’s manual for instructions. • Set the keyboard to a comfortable position. Correct password Wrong password Restart the PC, then...

  • Page 17: Installing An Operating System

    INSTALLING AN OPERATING SYSTEM This section provides information on installing the Windows NT Workstation operating system, OS/2 Warp Connect, and Windows 95 on your HP Vectra. For detailed installation information, refer to the manual that came with your operating system.

  • Page 18: Installing The Windows Nt Workstation Operating System

    INSTALLING THE WINDOWS NT WORKSTATION OPERATING SYSTEM The following instructions describe a simple installation of the US English version of the Windows NT Workstation operating system on a Vectra PC with a SCSI hard disk. For complete installation information, consult the manual that came with the operating system. Preparing to Install Windows NT Your PC is supplied with a disk kit, comprising one “XU/VT Boot”...
  • Page 19 NOTE If you are installing the US English version of Windows NT with a localized (non-US English) keyboard, you should choose the Custom Setup. The Custom Setup gives the option of selecting a localized keyboard. Insert “Setup Disk #3” when prompted by the installation program. When the installation program reports that no mass storage devices have been found, press S to specify an additional device.
  • Page 20 When prompted by the installation program, click on Restart Computer. Changing the Video Driver after Installation Windows NT starts in VGA mode by default. To install the latest HP qualified video driver for Windows NT: In the Control Panel, choose the Display icon.

  • Page 21: Installing The Os/2 ® Operating System

    INSTALLING THE OS/2 ® OPERATING SYSTEM These instructions explain how to install OS/2 Warp Connect on a HP Vectra PC with a SCSI hard disk. For complete installation information, consult the manual that came with the operating system diskettes.
  • Page 22 Press [ENTER] to continue when each error message appears. (These messages will appear because the HP SCSI drivers have not yet been installed. You must install the HP SCSI drivers, as described below, to prevent this error message appearing again.)
  • Page 23 Connect CD-ROM in the drive (some files will be copied from the CD-ROM when the operating system restarts). Installing the HP Video Driver After successful installation of OS/2, you should install the HP video driver from the “XU/VT Drivers and Documentation” CD-ROM. Insert the “XU/VT Drivers and Documentation” CD-ROM in the CD-ROM drive.

  • Page 24: Installing Windows 95

    These instructions explain how to install the US English version of Windows 95 (for PCs without Windows) on a HP Vectra PC with a SCSI hard disk. For complete Windows 95 installation information, consult the manual that came with your Windows 95 diskettes.
  • Page 25 To install the SCSI drivers after restarting your PC, click on the Start button then: point to Settings, click on Control Panel, double-click on System, and click on the Device Manager tab. Double-click on Other Device then double-click on PCI SCSI Bus Controller. Click on the Driver tab and then click on the Change Driver button.
  • Page 26 In the Install from Disk window, specify the path for the files on the CD-ROM with D:\LAN\W95. Click OK to confirm the selection of the HP PCI Integrated 10/100VG Interface. Restart the PC, by selecting Shutdown from the Start menu.

  • Page 27: Using Your Pc

    USING YOUR PC This chapter gives important ergonomic advice, explains how to set a password, and shows how to use your CD-ROM drive. WORKING IN COMFORT Thank you for choosing Hewlett-Packard equipment. To maximize your comfort and productivity it is important that you set up and use your equipment properly. This section of the User’s Guide provides guidance and hints, based on the latest ergonomic findings, to help you work in a comfortable and ergonomically low-risk environment.

  • Page 28: Installing Your Display

    INSTALLING YOUR DISPLAY Most HP displays come with a tilt and swivel feature that makes it easy to adjust the screen position. If your display does not have this feature, consider acquiring an accessory to provide this capability.

  • Page 29: Using A Document Holder

    YOUR HP KEYBOARD Your HP keyboard has a long cable so you can place it in the position most comfortable for you while you are using the system.

  • Page 30: Your Desk

    Your HP keyboard may have a kickstand which can be opened or closed to raise or lower the keyboard angle. If your elbows are at about the same level as the work surface, then you may choose not to use the kickstand. If your elbows are below the work surface, you may wish to raise the back of the keyboard by using the kickstand.

  • Page 31: Your Posture

    The chair must provide a comfortable sitting position. • You should be able to easily adjust the height. Minimum range should be 40 to 52 cm (15.5 to 20.5 in) as measured from the floor. • It should have a back support that is adjustable in both height and tilt (0 to 30 degrees backwards).

  • Page 32: Your Workspace And Work Environment

    Your arms should be relaxed and loose, elbows close to your sides, with the forearms and hands approximately parallel with the floor. Your wrists should be as straight as possible while using the keyboard, mouse, or trackball. They should not have to be bent upward, downward, or to either side more than 10 degrees. Your thighs should be horizontal or bent slightly downward.

  • Page 33: Further Suggestions

    Incoming light should be shielded or diffused to prevent glare and distracting reflection. In cases where strong sunlight is a problem, curtains, adjustable shades, or display hoods are recommended. If possible, try not to position the display in front of windows where glare, high contrast, and reflections will interfere with your screen presentations.
  • Page 34 Do not tilt your head forward by more than 15 degrees, and try not to turn your head toward the side. Make sure frequently used equipment is within easy reaching distance from your body. For example, if you are primarily using the keyboard, place it directly in front of you, not to the side.

  • Page 35: Bibliography Of Articles For More Information

    Make sure your arms and elbows are relaxed and loose, with your upper arm perpendicular to the floor or slightly forward (no more than 30 degrees) Keep your elbows close to your sides (less than 20 degrees away from your body) BIBLIOGRAPHY OF ARTICLES FOR MORE INFORMATION Caisse Nationale d’Assurances: “Le travail a l’écran de visualisation”, Lucerne (Switzerland), 1991.

  • Page 36: Setting A Password

    User Password The User Password provides these security features: • a power-on password prompt to prevent your PC being started in your absence • a keyboard lock timer which you can use to lock your PC after a specified number of minutes of keyboard inactivity •...

  • Page 37: Using Your Cd-Rom Drive

    The PC’s Setup program will appear. Date (Year/Month/Day) Time (Hour/Minute/Second) ..09 : 35 : 53 Windows 95 User Preferences User Password Keyboard Lock Timer Screen Blanking Use the key to move the highlight to the User Password line. To set your User Password, press [ENTER] once.

  • Page 38: Loading A Cd

    Your CD-ROM drive may be different from the drive shown here — Headphones Socket and Volume Control may not be present. 1. Open/Close Button Opens or closes the CD-ROM drawer. 2. Emergency Eject Used to open the CD-ROM drive mechanically when the power supply is off.

  • Page 39: Ejecting A Cd When The Open/Close Button Is Disabled

    Press the Open/Close button to close the drawer. The drawer can also be closed by gently pushing the drawer back into the drive. To remove the CD, press the Open/Close button to open the drawer. Remove the CD. Press the Open/Close button to close the drawer. EJECTING A CD WHEN THE OPEN/CLOSE BUTTON IS DISABLED If the Open/Close button is disabled by software or a power failure, use this procedure to remove a CD:...

  • Page 40: How To Install Accessories Inside Your Pc

    HOW TO INSTALL ACCESSORIES INSIDE YOUR This chapter explains how to install accessories, such as extra memory, accessory boards, and additional disk drives, in your PC. SUPPORTED HP ACCESSORIES This chapter describes how to install memory, mass storage devices, and accessory boards in your computer.

  • Page 41: Removing And Replacing The Cover

    Up to six accessory boards can be installed: three 32-bit PCI slots two 16-bit ISA slots one combination ISA or PCI slot WARNING: REMOVING AND REPLACING THE COVER Switch off the display and computer. Disconnect the power cords from the power outlets, computer, and display. Disconnect any telecommunication cables from the computer.
  • Page 42 If necessary, unlock the cover using the key provided with the computer (the lock is on the back of the computer). Lift the two securing latches at the front of the computer. Disconnect the power cords...
  • Page 43 Lift the securing latches Slide the cover forward until it is clear of the computer. If you have difficulty removing the cover, try pushing gently against the CD-ROM drive with your thumbs as you pull the cover toward you Slide the cover clear of the computer...

  • Page 44: Replacing The Cover After Installing Accessories

    REPLACING THE COVER AFTER INSTALLING ACCESSORIES Check that you have installed all your accessories (and removed a plastic panel from the front of the cover, if you installed a disk drive in a front shelf). Check that all internal cables are safely routed. Check that the cover is unlocked and the latches are outwards.

  • Page 45: Moving The Power Supply

    Lock the cover (at the back of the computer) If required, lock the cover using the key. Reconnect all cables and power cables. MOVING THE POWER SUPPLY You can slide the power supply unit out of the computer to improve access to the system board and the cables at the rear of the disk drives.

  • Page 46: Replacing The Power Supply After Installing Accessories

    Unscrew the self-retaining screws Using the small handle at the base of the power supply unit, slide the power supply out of the computer until it stops—the power supply unit remains connected to the computer Slide the power supply unit clear of the computer REPLACING THE POWER SUPPLY AFTER INSTALLING ACCESSORIES Power...

  • Page 47: Installing Memory

    Check that all internal cables are safely routed. Slide the power supply back into the computer. Tighten the two self-retaining screws. INSTALLING MEMORY MAIN MEMORY MODULES Your PC is supplied with main memory. If you need more main memory to run your application software, you can install up to a total of 256 MB.

  • Page 48: Installing More Memory On The Mga Video Adapter

    Slide each memory module into the slot at 90° to the system board (hold the memory module with the cutouts closest to the processor). Slide the memory module into the slot at 90° Firmly press each memory module completely into the connector until the retaining clips click into position.
  • Page 49 640 x 480 2 MB 800 x 600 2 MB 1024 x 768 2 MB 1280 x 1024 2 MB WARNING: Static electricity can damage electronic components. Turn all equipment OFF. Don’t let your clothes touch the accessory. Handle the accessory as little as possible and with care.

  • Page 50: Installing Accessory Boards

    Video Adapter accessories available from other sources Additional accessories, including memory upgrades and a video MPEG module, are available for your video adapter. However, these accessories cannot be ordered from HP. Contact your dealer for more details about these accessories.
  • Page 51 Plug and Play is an industry standard for automatically configuring your PC's hardware resources and the accessory boards installed in it. Accessory boards which support the Plug and Play standard can be detected and configured automatically by your PC. Your PC has configurable support for Plug and Play in the system BIOS. When you start your PC, the Plug and Play system BIOS can detect automatically which hardware resources (IRQs, DMAs, memory ranges, and I/O addresses) are used by the system-based components.

  • Page 52: Installing The Board

    Windows 95 can detect and configure automatically Plug and Play accessories if Plug and Play Device Management is set to Full in the Setup program. Non-Plug and Play ISA Accessory Boards You must run the Add New Hardware wizard to configure non-Plug and Play accessories. The Add New Hardware wizard can identify automatically many accessory boards.
  • Page 53 Unscrew and remove the slot cover Hold the board horizontally by its “top” edge. Slide it into the board guide of the chosen slot. Do not bend the board. Align the board’s connector with the slot’s socket. Firmly press the board into the socket. Ensure the board’s connector engages completely with the socket and does not touch components on other boards.
  • Page 54 Secure the board in position If you install a VESA-standard video accessory board that uses the MGA video adapter, connect the accessory board’s cable to the VESA pass-through connector on the MGA adapter board. 10 If you install a Creative Labs wavetable accessory board that operates with the integrated SoundBlasterTM audio interface, connect the board’s interface cable to the wavetable interface connector on the system board.

  • Page 55: Installing Disk Drives

    11 Install any other accessories before replacing the cover (see "Replacing the Cover after Installing Accessories" earlier in this chapter). Reconnect all cables and power cords. Completing the Installation of an ISA Accessory Board If you have installed an ISA accessory board that uses IRQ 9, 10, 11, or 15, you must run the Setup program and reserve the IRQ for the accessory board.

  • Page 56: Installing A Hard Disk Drive

    INSTALLING A HARD DISK DRIVE The computer has an integrated SCSI controller and an integrated Enhanced IDE controller. • The Enhanced IDE controller supports up to four IDE devices: • two IDE devices can be connected to the Primary Channel cable (connected to the grey connector on the system board) •...
  • Page 57 Installing a Hard Disk Drive in an Internal Shelf NOTE Hard disk drives ordered from HP are supplied with a mounting tray. If you order your drive from another supplier, you may need to order a mounting tray from HP.
  • Page 58 Secure the drive using the screw provided. Locate the appropriate data cable for the hard disk drive. Rotate the drive into position Secure the drive...
  • Page 59 IDE drives should be connected to the Primary IDE Channel cable (this cable is connected to the grey connector on the system board) NOTE The IDE data cables are in a bag supplied separately with your SCSI drives can be connected to any free connector on the SCSI cable...
  • Page 60 Remove the computer’s cover (see "Removing and Replacing the Cover" earlier in this chapter). Slide out the power supply to provide better access to the disk drive cables (see "Moving the Power Supply" earlier in this chapter). Unscrew and remove an unused drive tray. Mount the drive on the tray as shown below.
  • Page 61 Locate the appropriate data cable for the disk drive. IDE drives should be connected to the Primary IDE Channel cable (this cable is connected to the grey connector on the system board) NOTE The IDE data cables are in a bag supplied separately w ith your SCSI drives can be connected to any free...

  • Page 62: Completing The Installation Of A Hard Disk Drive

    Data Cable Slide the power supply back into position, and tighten its self-retaining screws (see "Replacing the Power Supply after Installing Accessories" earlier in this chapter). 10 Install any other accessories before replacing the cover and completing the installation. 11 "Completing the Installation of a Hard Disk Drive" later in this chapter to complete the installation.

  • Page 63: Installing A Drive In A Front-Access Shelf

    Drives ordered from HP are supplied with mounting rails. If you order your drive from another supplier, you may need to order drive mounting rails from HP. You should order product number D2880A for 5.25- inch disk drive rails or product number D3566A for 3.5-inch disk drive rails.
  • Page 64 Slide the drive into the shelf. Secure the drive in position using the screws provided with the drive. Locate the appropriate data cable for the device Flexible Disk Drive Cable SCSI devices can be connected to any free connector on the SCSI cable Connect the data and power cables to the rear of the device.
  • Page 65 Data Cable Slide the power supply back into position, and tighten its self-retaining screws (see "Replacing the Power Supply after Installing Accessories" earlier in this chapter). 10 Remove the plastic panel from the cover by pulling the panel from the left and unhinging its right-hand side.

  • Page 66: Installing A Processor

    Press [F3] to save and exit the program. INSTALLING A PROCESSOR Some operating systems support a second processor for increased performance. Contact your authorized reseller for up-to-date information. You may also replace the original processor with a faster processor. Disconnect the computer’s power cord and any telecommunications cable. Remove the computer’s cover (see "Removing and Replacing the Cover"...
  • Page 67 Install the VRM module supplied with the processor. Unlock the processor socket and position the processor over it. Insert the new processor into the socket and lock the processor into place. Insert the processor into the socket Place the heatsink on the processor and attach the retaining clips to the processor socket.
  • Page 68 Attach the heatsink to the socket Carefully set the PC in the upright position. 10 Slide the power supply back into the computer and tighten the two self-retaining screws. 11 Replace the airflow guide above the processor socket.

  • Page 69: Completing The Installation Of A Processor

    COMPLETING THE INSTALLATION OF A PROCESSOR Verify that the system board bus speed switches are correctly configured for the processor. Switch 4 Switch 5 Switch 6 NOTE If two processors are installed, both must operate at the same bus speed and processor speed. Refer to the manual supplied with the processor to verify which bus and processor speeds are supported.

  • Page 70: Troubleshooting Your Pc And Using The Setup Program

    SETUP PROGRAM This chapter can help you solve problems that you may encounter when using your PC and describes how to use the HP Setup program. SOLVING PROBLEMS If you have a problem with your PC, search the list below for the problem description which most closely matches it.

  • Page 71: If You Cannot Solve The Problem

    If you are unable to solve your problem after following the troubleshooting advice in this chapter, refer to chapter 6, HP Support and Information Services, for information on getting help from your HP Reseller or from your nearest HP Customer Support Center.

  • Page 72: If An Error Message Appears

    ROM are corrupted or incomplete, and you will need to update the system BIOS using the HPInit utility. Contact your HP reseller (or your HP sales office) to get an HPInit utility diskette and the latest system BIOS for your PC by mail.
  • Page 73 • If prompted by the EMU, press [F2] to run Setup and correct the error (refer to "Using the HP Setup Program" in this chapter for information on using Setup). • Press [F1] to continue and ignore the error. (It is recommended that you fix the error before proceeding, even if the PC appears to start successfully.)
  • Page 74 BIOS Error Messages that May Prevent Your PC From Starting: Cannot start from hard disk (A new drive may need to be partitioned and formatted). For more information refer to your manual. To continue without an explana- tion, just press F1. Insert system diskette in drive.

  • Page 75: If Your Pc Has A Hardware Problem

    Also check your display manual to find out which refresh rate is required. Use the HP User Tools (in Windows 95 only) or the Setup program to select the correct refresh rate.

  • Page 76: If Your Keyboard Or Mouse Does Not Work

    If You Cannot Use Any Video Resolution Higher Than 640 X 480 If you cannot select a video resolution higher than 640 X 480, you should clear the contents of the CMOS memory. To clear the configuration: Switch off the PC and remove the cover (refer to chapter 3 for instructions). Set the system board switch 1 (CONFG) on the switch block to ON to clear the configuration from the CMOS memory (refer to "System Board Switches"...

  • Page 77: If Your Printer Does Not Work

    IF YOUR PRINTER DOES NOT WORK Verify that the power cord is plugged into the power outlet and into the printer. Make sure the printer’s power switch is ON. Check that the printer is on-line. Examine the paper feed mechanism for a paper jam. Verify that you have the correct cable for the printer.

  • Page 78: If The Hard Disk Does Not Work

    Density diskettes in drive A (High Density diskettes have a HD symbol printed on the diskette). Check that the flexible disk drive has not been disabled in Setup (refer to "Using the HP Setup Program" in this chapter). There are two options in the Security Features section of Setup which may be used to disable or enable: •...

  • Page 79: If Your Pc Has A Software Problem

    IF YOUR PC HAS A SOFTWARE PROBLEM IF YOU HAVE FORGOTTEN YOUR PASSWORD • If you forget the User Password and the System Administrator Password is set and known: Restart the PC. If the keyboard is locked, unplug the power cord and plug it in again. Wait for the message <F2=Setup>.

  • Page 80: If The Date And Time Are Incorrect

    This might be due to the DMA channel selected. If you hear no output from both the 8-bit and 16-bit digitized sounds, this might be due to an interrupt conflict. Use the HP Setup program or your operating system’s audio control software to change the audio interface’s DMA channel or...

  • Page 81: If The Cd-Rom Drive Has A Problem

    The Volume is Too Low The computer has two output jacks, Stereo Out on the rear of the computer and a headphones jack on the front panel, which provide the same output signal. This is a low-distortion output that cannot drive (without amplification) low-impedance devices such as speakers. If you plug devices with a low-impedance (less than 32 ohms) into the Stereo Out jack or the headphones jack, the volume will be low.

  • Page 82: Using The Hp Setup Program

    CD-ROM drive icon or drive letter assigned to the CD-ROM drive by your operating system. WARNING: USING THE HP SETUP PROGRAM Setup is an integrated (ROM-based) program that displays the PC’s configuration. Configuration information for associated PC features is grouped together to make it easier to find.
  • Page 83 <Setup=F2> appears for only a few seconds, just after the beeps signalling the end of the self- test. The PC’s Setup program will appear. System BIOS (Version x.xx.xx) Video Adapter (MGA Millenium 2 MB, Video BIOS version xx.xx) System Board (Pentium™) Pro, XXX MHz) Memory (xx MB, 640 KB base, 384 KB Reserved, XX Ext.) Hard Disk Drives (No IDE disk detected) LAN (100VG, MAC address: 1234567890)

  • Page 84: Understanding The Setup Program

    UNDERSTANDING THE SETUP PROGRAM This section of the book only explains the important Setup options that are not described elsewhere in this User’s Guide . The built-in Setup program is accessed by pressing [F2] during the PC’s Power-On-Self-Test. For more information about Setup options, highlight an option and press [F1] for context- sensitive online help.
  • Page 85 User Preferences User Password ..Not Set/Set Keyboard Lock Timer ..Disabled/Enabled Screen Blanking ..Enabled/Disabled Key Autorepeat Speed Delay before Autorepeat .
  • Page 86 If no devices are installed on the second IDE channel, you should highlight Secondary Integrated Channel and select Disabled. This will make more system resources available for other system components. IDE Primary Channel Device 1 ... . 840 MB Device 2 .
  • Page 87 Security Features Some of the Security Features options will not be available if you have selected Windows 95 … Installed. Security Features System Administrator Password . . Not Set Start with Keyboard Locked Flexible Disk Drives Writing on Flexible Disks ..Allowed/Not Allowed Plug and Play Device Management .
  • Page 88 NOTE These options may not be available if Windows 95 is installed on your computer. Configuring Audio Use these options to reserve system resources for the computer’s integrated SoundBlaster™ audio interface. If you do not want to use the audio interface, you should highlight the Audio Interface option and select Disabled.

  • Page 89: Using The Scsiselect Utility

    IRQ 12 is used by the mouse. If you do not use a mouse, IRQ 12 can be used by accessory boards. Viewing the PC Serial Number If your computer supports a Serial Number, it can viewed here. PC Serial Number ..Not Available/1234567890 USING THE SCSISELECT UTILITY WARNING: The SCSISelect utility is intended for advanced...
  • Page 90 Configure/View Interface Settings Menu We recommend that these settings are not changed. Configuration SCSI Channel Interface Definitions Interface SCSI ID ..7 SCSI Parity Checking Additional Options SCSI Device Configuration ..Press <Enter> Advanced Configuration Options <F6>...
  • Page 91 SCSI Device Configuration Menu This menu lets you configure parameters for each SCSI device on the SCSI bus. To configure a specific SCSI device, you need to know which SCSI ID it uses. SCSI Device ID Initiate Sync Negotiation Maximum Sync Transfer Rate Enable Disconnection Options Listed Below Have NO EFFECT if the BIOS is Disabled Send Start Unit Command...
  • Page 92 Advanced Configuration Options SCSI Bus Reset at Interface Initialization Options Listed Below Have NO EFFECT if the BIOS is Disabled Interface BIOS Support Removable Disks Under BIOS as Fixed Disks Extended BIOS Translation for DOS Drives > 1 GByte BIOS Support for More Than 2 Drives (MS-DOS 5.0 and above) Arrow keys to move cursor, <Enter>...

  • Page 93: If The Scsi Hard Disk Stops Working

    IF YOU LOSE THE KEY If you lose the key to the PC, you need to order a replacement lock (HP part number 5062- 5590) from the HP dealer or HP Sales and Service Office. The new lock is delivered with two...

  • Page 94: Technical Information

    TECHNICAL INFORMATION This chapter provides technical information about your PC. SYSTEM SPECIFICATIONS Features and Characteristics Feature: Processor (standard) Cache Memory (integrated in processor package) Main memory (size/speed) Video Audio Disk drive controller Rear connectors 25-pin parallel connector 9-pin serial connectors Disk drive shelves System board connectors Description:...

  • Page 95: Audio Features

    Music Synthesizer Description: Three 32-bit PCI slots, one combo ISA/PCI slot, two 16-bit ISA slots HP keyboard with mini-DIN connector HP mouse with mini-DIN connector Description: 15 kilograms (33 pounds). 40.5 cm (D) by 21 cm (W) by 41.5 cm (H) (15.95 inches by 8.27 inches by 16.34 inches).

  • Page 96: Power Consumption Information

    Audio Features (contd.) Feature: Mixer Built-in Power Amplifier MIDI Interface Microphone Input Headphones Jack/Stereo Out Jack Sound Codec POWER CONSUMPTION INFORMATION Full Power mode NOTE When the PC is turned off with the power button on the front panel, the power consumption falls below 5 Watts, but is not zero.

  • Page 97: The Pc's Memory Map

    Typical Power Consumption/Availability for ISA Accessory Slots +5 V 1 A limit per slot (limited by system board) +12 V 0.2 A limit per slot (limited by system board) - 5 V 0.2 A total power limit (limited by power supply) -12 V 0.5 A total power limit (limited by power supply) Typical Power Consumption/Availability for PCI Accessory Slots...

  • Page 98: Irqs, Dmas, And I/O Addresses Used By Your Pc

    IRQS, DMAS, AND I/O ADDRESSES USED BY YOUR PC The IRQ, DMA, and I/O address mappings shown here are for a PC with a basic configuration. The resources used by your PC may vary, depending upon which accessory boards are bundled with the PC.

  • Page 99: Available Video Resolutions

    I/O Addresses used 170h - 177h by PC 1F0h - 1F7h 220h - 22Fh 278h - 27Fh 2E8h - 2EFh 2F8h - 2FFh 300h - 301h 330h - 331h 376h 377h 378h - 37Fh 388h - 38Bh 3E8h - 3EFh 3F0h - 3F5h 3F6h 3F7h...

  • Page 100: The Pc's Rear Connectors

    THE PC’S REAR CONNECTORS...

  • Page 101: System Connectors And Switches

    SYSTEM CONNECTORS AND SWITCHES SYSTEM BOARD CONNECTORS Fan Connector Processor 1 Status Panel Processor 2 Connector Primary IDE Connector Flexible Drive Connector Secondary IDE Connector SCSI Connector Microphone PCI Slots CD-ROM Audio Audio Control Panel Wavetable Connector ISA Slots Loudspeaker External Start Connector System Board Switches...

  • Page 102: Video Adapter Switches

    VIDEO ADAPTER SWITCHES Video Adapter Switches The Matrox video adapter has a Flash BIOS. This gives you the possibility of upgrading the video BIOS when updates are made available by Matrox. Switch Use Switch Block to: Flash EEPROM Switch for VGA BIOS: •...

  • Page 103: System Board Switches

    SYSTEM BOARD SWITCHES Switch Use Switch Block to: 1 - CONFG Retain or clear the configuration stored in EEPROM: • OFF to retain configuration — DEFAULT • ON to clear configuration. 2 - PSWRD Enable or clear (and disable) User and System Administrator Passwords stored in EEPROM: •...

  • Page 104: Recycling Your Pc

    HP can also take your old PC back for recycling when it reaches the end of its useful life. HP has a product take-back program in several countries. The collected equipment is sent to one of HP’s recycling facilities in Europe or the USA.

  • Page 105: Hewlett Packard Support And Information Services

    HP Authorized Resellers have been trained on HP Vectra equipment and are familiar with its configuration and environment. Authorized Resellers can also answer questions regarding non- HP hardware, software and systems as well as answer queries about usage not intended for, or not commonly used with the HP Vectra.

  • Page 106: Hp Supportpack

    HP PC, and allows you to communicate with other HP users through an on-line user forum. HP users share their knowledge and experience with you, and you will be able to ask, or answer, technical questions about your HP Vectra PC, and HP products.

  • Page 107: Hp Forum On America Online

    [ENTER] This will load the HP Home Page directly onto your screen. In the HP Forum you can ask and answer questions about HP products and you can also download drivers, software application notes, or utilities for HP products.

  • Page 108: Internet-Ftp Library Service

    Enter your E-mail address ACCESS HP WORLD WIDE WEB SITE Access HP, HP’s World Wide Web site gives you access to information about HP, its products, including product data sheets, service and support information, electronic newsletters and technical tips. You can also download the latest versions of drivers, BIOS and software utilities.

  • Page 109: Ordering Drivers And Bios On Diskette{Xe "Drivers"}{Xe "Bios

    Contact your authorized HP reseller for assistance in selecting the appropriate driver. • If your reseller is unable to help you, call HP FIRST for the most up-to-date list of drivers. HP SUPPORT SERVICES Hewlett-Packard provides a three year hardware warranty which includes on-site service during the first year after purchase, and a return service during the second and third years after purchase.

  • Page 110: Hewlett-Packard Telephone Support

    The number is: +31 (20) 581-3330 Other Regions Contact your reseller who will be able to help you, or direct you to the appropriate HP telephone support service. Please have the following information ready when you call so that your enquiry can be dealt with quickly: •...

  • Page 111: Lifeline Telephone Support

    This contract service provides unlimited toll-free access to HP Response Center Engineers (RCEs). To obtain an HP NPS contract, contact your HP authorized reseller, or if you are in the US call (800) 437-9140.

  • Page 112: Summary

    SUMMARY The table below summarizes the services and support available from HP or authorized resellers. Service Covers Basic Parts and labor Warranty for HP products: first year on-site, second and third year return to HP Parts and labor SupportPack for HP products...

  • Page 113: Hewlett-Packard Marketing Headquarters

    Should you wish to contact Hewlett-Packard, check your local telephone directory for the HP Sales and Service Office near you. If you cannot find a convenient HP office, you can write to one of the major HP Sales and Service Offices or one of the Worldwide Marketing Headquarters listed here.

  • Page 114: Hp World Wide Web Server

    HP ANONYMOUS FTP SERVER Access the HP Anonymous FTP server to download new drivers, utilities, and flash BIOS upgrades. FTP to IP address: xxx.x.xx.x EUROPEAN CUSTOMER SUPPORT CENTER For assistance from the HP European Customer Support Center, the number is: +00 000 0000.

  • Page 115: Glossary

    GLOSSARY 100VG-AnyLAN Refers to the 100 Mbit/s network technology over voice grade cable that is compatible with the proposed IEEE 802.12 standard. This technology guarantees access to any end node that requests to transmit, while ensuring priority access to end nodes that require consistent, continuous access for applications such as full-motion video or video conferencing.
  • Page 116 DIMM Dual In-line Memory Module. These memory modules provide a 64-bit data path for improved system performance. device driver Software that enables the computer to interface with a specific peripheral, such as a printer or display. Digital Signal Processor. Error Correcting Code can detect and correct data errors in memory modules. expansion slot A slot inside the computer, connected to the system board, that can be used for accessory boards.
  • Page 117 memory modules Miniature boards containing memory chips. Used for increasing the amount of memory available in the computer. MID files Standard file format used to store MIDI sequence information. MIDI Musical Instrument Digital Interface. An international hardware/ software standard that specifies the cable and hardware interface that allows several devices, instruments, and computers to interchange music codes and events.
  • Page 118 Read-Only Memory. Computer memory used to store parts of the computer’s operating system permanently. ROM chips can contain instructions and data. SCAM SCSI Configured Automatically. A protocol which automatically assigns device IDs to SCSI devices which support SCAM. SCSI Small Computer System Interface. A high-speed data bus used for connecting hard disks, tape drives, and other accessories to your computer.
  • Page 119 VOC files Proprietary digital audio format developed by Creative Labs, Inc. Most digital audio adheres to the Microsoft WAV format. WAV files A Microsoft file format for storing digital audio data.

  • Page 120: Regulatory Information And Warranty

    38090 Villefontaine FRANCE Declares that the product: Product Name: Personal Computer Model Number: HP Vectra VE 5/series 2 Conforms to the following Product Specifications: SAFETY International: IEC 950: 1991+A1+A2 Europe: (*) applicable when the product has a built-in CD-ROM Drive...
  • Page 121 Hewlett-Packard’s system certification tests were conducted with HP-supported peripheral devices and HP shielded cables, such as those you receive with your system. Changes or modifications not expressly approved by Hewlett-Packard could void the user’s authority to operate the equipment.

  • Page 122: Hp Hardware Warranty

    HP Service Center or a participating Authorized HP Personal Computer Dealer Repair Center, during the second and third years of use. If HP receives notice of above defined defects during the warranty period, HP will either, at its option, repair or replace products which prove to be defective.
  • Page 123 If the product is not normally sold by HP in the country of use, it must be returned to the country of purchase for service.
  • Page 124 (excluding HP holidays) for HP Travel Zones 1-3 (generally 100 miles or 160 Km from the HP office). Response time is second business day for Zones 4 and 5 (200 miles, 320 Km); third business day for Zone 6 (300 miles, 480 Km); and negotiated beyond Zone 6. Worldwide Customer Support Travel information is available from any HP Sales and Service Office.
  • Page 125 LICENSE AGREEMENT. PROCEEDING TO OPERATE THE EQUIPMENT INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE TO THE LICENSE AGREEMENT, YOU MUST NOW EITHER REMOVE THE SOFTWARE FROM YOUR HARD DISK DRIVE AND DESTROY THE MASTER DISKETTES, OR RETURN THE COMPLETE COMPUTER AND SOFTWARE FOR A FULL REFUND.
  • Page 126 Software Product Limited Warranty Ninety-Day Limited Software Warranty HP warrants for a period of NINETY (90) DAYS from the date of the purchase that the software product will execute its programming instructions when all files are properly installed. HP does not warrant that the operation of the software will be uninterrupted or error free.

This manual is also suitable for:

Vectra xu6VectraVectra xu 6/xxx

Table of Contents