Replotting With Hp-Gl/2 Jobs Is Not Possible; The Printer Stops When Printing A Hp-Gl/2 Job (The Carriage Stops Moving) - Canon imagePROGRAF iPF650 User Manual

Large format printer

Hide thumbs Also See for imagePROGRAF iPF650:

Table of Contents

Troubleshooting

HP-GL/2 problems

Replotting with HP-GL/2 jobs is not possible.

The data was lost be-

cause of replotting.

The printer is analyzing the print job.

A job was printed when Input Resolution in the

Control Panel menu was set to 600dpi.

Replotting with HP-GL/2 jobs is not possible.

Data for replotting is lost after the following operations. In this case, send the print job again.

• The memory buffer was cleared from the Control Panel.

• The printer was turned off.

• The printer has received a new HP-GL/2 print job.

• Printing has been canceled

Corrective Action

Please wait a while until printing is finished.

In the Control Panel menu, set Input Resolution to 300dpi and

print again.

(See "Menu Settings.")

Show Quick Links

Table of Contents