Summary of Contents for Kenmore Kenmore Three-Speed Automatic Washers
Page 1
TRIPLE SMART Dispenser IMPORTANT: Read and follow all safety and operating instructions before first use of this product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U,S.A. www.sears.com Sears Canada Inc., Toronto, Ontario, Canada MSB 2B8 www,sears,ca 8312692 PRINTED IN U.S.A.
Page 2
For more information about the care Model No. and operation of Kenmore ELITE appliances call your nearest Sears store. You will need the complete model and serial numbers when requesting informa- Serial No. tion. Your washer's model and serial num- bers are located on the Model and Serial Number Plate.
Page 3
* In Canada a different warranty may apply. For one year from the date of pur- chase, when this washer is installed In the U.S. or Canada, for Sears warranty and operated according to the instruc- information or to contact a Sears Service tions that come with it, Sears will repair Center in the U.S., call 1-890-4-MY-HOME '...
Page 4
Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others.
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your washer, follow basic precautions, including the following: • Read all instructions before using • Do not allow children to play on or the washer.
INSTALLATION OVERVIEW For a complete list of tools and parts needed, see pages 7-9, A. SELECT LOCATION FOR YOUR WASHER (pgs. 11-13) Recessed Area/ Laundry Tub Drain System (p, 12) Closet Installation Instructions (p. 11) Standpipe Drain System (p, 13) Floor Drain System (p.
Page 7
B, REMOVE SHIPPING STRAP (p. 14) Tools Needed: Scissors Flashlight (optional depending on installation) C, CONNECT DRAIN HOSE (pgs, 15-16) Ns_IST Tools Needed: Parts Supplied: Pliers that open to 1 9/IGin (3.95 cm) 1 yellow, single-wire 1 silver, double- hose clamp (top of Flashlight (optional wire hose clamp drain hose)
Page 8
D. CONNECT INLET HOSES TO WASHER (pg. 16-17) Tools Needed: Parts Supplied: 2 water inlet hoses Pliers that open to lg_ in {3.95 cm) Flashlight (optional depending on installation) 4 flat water inlet hose washers E. CONNECT INLET HOSES TO WATER FAUCETS (pg. 17) Tools Needed: Parts Supplied: 2 water inlet hoses...
Page 9
F, SECURE DRAIN HOSE (p. 18) Tools Needed: Parts Supplied: Shipping strap with fastener Flashlight (optional depending on installation) G. LEVEL WASHER(p. Tools Needed: Parts Supplied: 9/16in (1.43 cm) open-end wrench 2 front leveling legs with nuts Wood block Flashlight (optional depending on installation)
ELECTRICAL REQUIREMENTS • For a grounded, cord- 120-Volt, 60-Hz,, AC-only, 15- or connected washer: 20-ampere fused electrical supply is required, (Time-delay fuse or circuit GROUNDING INSTRUCTIONS breaker is recommended.) Connect to This washer must be grounded. In the individual branch circuit. event of malfunction or breakdown, grounding will reduce the risk of electri- cal shock by providing a path of least...
Page 11
A. SELECT LOCATION FOR YOUR WASHER Selecting the proper location for your washer will improve its performance and minimize concerns like washer walk or noise, RECESSED AREA/ CLOSET INSTALLATION INSTRUCTIONS This washermay be installed in a recessed area or closet. 3 in (7.6 cm) 48 ir__...
Page 12
LAUNDRY TUB DRAIN SYSTEM Do not store or operate washer at or below 32°F (0°C) (some water may Check location where washer will be remain in washer), See page 36 for installed. This washer can be installed winterizing information. using one of three systems: Proper installation is your responsibility.
Page 13
Siphon break, Part No. 285320; additional drain hose, Part No. 335709C and Connector Kit, Part No. 285442 Parts listed are available from your local Sears store or Sears Service Center. In the United States, call 1-800-366-PART (1-800-366-7278). In Canada, call 1-877-533-6937.
B. REMOVE SHIPPING STRAP STEP 2. Pull firmly to remove the end of the shipping strap that remains pinned to the back of the washer, This W_0jiiFm_" :I_l =[31t" will release the rear self-leveling legs. Removing the shipping strap is necessary for smooth operation.
Hose kit, Part No, 285442 A problem with lint clogging your drain Drain protector, Part No. 367031 Parts listed are available from your local Sears store or Sears Service Center. In the United States, call 1-800-366-PART (1-800-366-7278). In Canada, call 1-877-533-6937.
Page 16
D. CONNECTINLETHOSES For standpipe or laundry tub drain TO WASHER systems: STEP 2. Open yellow, single-wire clamp with pliers and slide over hooked end of drain hose to secure the rubber and Proper connection of your inlet corrugated sections together. hoses will allow hot and cold water to enter your washer properly.
Page 17
6 ft (1.8 m), Part No. 76314 10 ft (3.0 m), Part No. 350008 Parts listed are available from your local Sears store or Sears Service Center. In the United States, call 1-800-366-PART (1-800-366-7278). In Canada, call 1-877-533-6937.
F. SECURE DRAIN HOSE If the water faucets and drain standpipe are recessed, put hooked end of drain hose in standpipe. Tightly wrap the shipping strap around the drain hose and water inlet hoses (not the handles Securing the drain hose properly will or stems), Push fastener into the protect your floors from damage due...
G. LEVEL WASHER STEP 5. Move washer to its final location. STEP 6. Tilt washer forward until rear of washer is at least 3 in (7.6 cm) off Leveling your washer properly pre- floor. You may hear the self-adjusting vents excessive noise and vibration. rear legs click into place.
REVIEW INSTALLATION Take a few minutes to complete this checklist. It will help assure you that you have a proper installation and increase your satisfaction with your Kenmore ELITE washer. Check that: Check electrical requirements. Be sure you have correct electrical •...
LID INSTRUCTIONS These instructions are found under the lid of your washer. To get the maximum cleaning and fabric care from your washer, please read and follow these instructions. POWDER or LIQUID ,,---_j_..._,:_ DETERGENT Fire Hazard Dissolves powder or liquid detergents before applying to load.
1. SELECT & ADJUST ..Make the selections for these washer controls: • WATER LEVEL Adjust to load size. • WASH/RINSE TEMP ..Adjust to type of fabric and soil Use AUTO TEMP selections for best wash performance. • RINSE OPTIONS ... Select to add a second rinse automatically.
Page 23
It's best to wash stains as soon as possible. Rinse immediately or soak in cold water with detergent for 30 minutes. Rinse. Rub detergent into any remaining stains. Rinse thoroughly. Sponge immediately or apply a prewash soll and stain remover. Rinse.
STARTING YOUR WASHER STEP 8. Set SPEEDS _) Control according to the type of fabric in the STEP 1. Place a load of sorted clothes load (see page 26). in the washer. Add measured detergent directly into dispenser (details on page 31). STEP 9.
WATER LEVEL CONTROL Washers with 4-position or 5-position Water Level Control: • To change to a higher water level setting after the washer has started to agitate, turn the knob to the desired This control gives you the flexibility new setting. save water when washing small loads.
AUTOMATIC TEMPERATURE The wash action mirrors the way you would treat hand washable garments in CONTROL (ATC) a sink. It does this by repeating periods of extra-slow speed agitation and soaking. Slow spin speeds help reduce wrinkling. Do not use this setting for large items like blankets.
Page 27
SETTING YOUR CYCLE remove the water. If water is removed, SELECTOR (TIMER) CONTROL add detergent and set washer to a desired wash cycle. If water is not Use this control to choose the removed, select a new wash cycle agitation time and to start the washer. (do not add additional detergent).
Page 28
CYCLE/OPTIONS DESCRIPTIONS You may add options to your wash cycle. The chart below shows you the proper set- tings for your Cycle Selector Control (Timer) and RINSE OPTIONS Control. The Cycle Selector Control needs to be set where you want the cycle to start and the RINSE OPTIONS Control needs to be set where you want the cycle to stop.
UNDERSTANDING WHAT HAPPENS IN EACH CYCLE AUTO SOAK ULTRA CLEAN PERMANENT PRESS selected level selected level selected level Fill to Fill to Fill to Wash Wash Agitate selected time selected time Soak no spin Drain Drain - Partial Pause Spin Agitate Fill for Soak...
SELF-CLEANING LINT FILTER TOTAL CARE AGITATOR iriJmviJu_ ;I_4 ! [_ fl'= rtl_ vIJu_ *-I:.1 i[_ Lint is filtered from the load Kenmore's exclusive TOTAL CARE automatically - there's no messy agitator has triple action agitation cleanup. give you the most flexible fabric care for even your largest loads.
Page 31
USING YOUR TRIPLE SMART UNDERSTANDING NORMAL WASHER SOUNDS DISPENSER Your new washer may make sounds that your old one didn't. Because the sounds are unfamiliar, you may be The TRIPLE SMART DISPENSER concerned about them, makes your washer truly automatic by The following describes some of the making it unnecessary for you to normal sounds you may hear and what...
USING THE LIQUID CHLORINE • Do not let bleach splash, drip, or run down into washer basket. Undiluted BLEACH DISPENSER bleach will damage any fabric it touches. • Start the washer. Bleach will be dispensed automatically after the detergent has had time to work. The liquid chlorine bleach dispenser automatically dispenses bleach at the...
Page 33
USING THE LIQUID FABRIC SOFTENER DISPENSER After loading the washer, measure and add the recommended amount of fabric softener into the dispenser. Follow manufacturer's directions. Liquid fabric softenerdispenser If cleaning of the liquid fabric softener dispenser is required: Scrub with a brush using a liquid •...
PREPARING CLOTHES SORTING FOR WASHING • Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. Separate lint givers (towels, chenille) from lint takers (cordu- roy, synthetics, permanent press). When Follow these recommendations possible, turn lint givers inside out. to help you prolong the life of •...
LOADING LOADING SUGGESTIONS For these suggested full-sized load& set the WATER LEVEL selector to the highest water level setting. Proper loading of your washer con- tributes to proper cleaning and fabric KING SIZE CAPACITY WASHERS care and reduces machine noise, Heavy Work Clothes Towels...
CLEANING YOUR WASHER WINTER STORAGE OR MOVING CARE Exterior Install and store your washer where it Wipe up detergent, bleach, and other will not freeze. Because some water spills with a soft, damp cloth or sponge may stay in the hoses and pump, as they occur.
Page 37
Most laundering problems are easily solved if you understand the cause. Check these lists for common laundry and washer problems. If you need further assistance, see service and assistance information on the back page. Problem Possible Cause Solution Washer Leaks Household plumbing is leaking.
Page 38
Problem Possible Cause Solution Won't Drain/ Low voltage or using Check electrical source or calI Won't Spin/ an extension cord. electrician. Do net use extension Wet Loads cords. (cont,) Cold rinses. Cold rinses leave loads wetter than warm rinses. This is normal. Continues Drain hose is less than Raise the drain hose...
Page 39
Problem Possible Cause Solution Machine Power cord not plugged in. PIug in power cord. Stops No power at plug. Check electrical source or call electrician. Fuse blown or circuit Replace fuse or reset circuit breaker. breaker open. If problem continues, call electrician. Using an extension cord, Do not use extension cords.
Page 40
Problem Possible Cause Solution Tearing Overloading. Improper Loads should move freely during use of washer, wash. Wash smaller loads or increase water level Improper use of chlorine Do not pour chlorine bleach directly bleach. Undiluted bleach on Ioad. Wipe up bleach spills. will damage fabrics.
KENMORE ELITE WASHERS "We Service What We Sell" is our assurance you can depend on Sears for service. Your Kenmore appliance has added value when you consider that Sears has ser- vice units nationwide, staffed with professional technicians trained on all appliances Sears sells, They have the knowledge and skills, tools, parts and equipment to ensure our pledge to you that "We Service What We Sell."...
Page 43
(1-800-366-7278) www.sears.comlpa rtsdirect Pare ordenar piezas - 1-800459-7084 For a Sears Service Center location in your area: Call 24 hours a day, 7 days a week 1-800-488-1222 For a Sears Maintenance Agreement purchase or inquiry: Call 7 a.m. - 5 p.m. CST, Monday - Saturday...