Epson PowerLite Cinema 500 Brochure

Epson powerlite cinema 500 projector brochure

Hide thumbs Also See for PowerLite Cinema 500:

See also: Operating Manual , User Manual

Epson PowerLite Cinema 500 Update

Your projector includes an additional picture quality setting not described in your User's Guide.

If you notice faint vertical bands in the picture, you can eliminate them by following these steps:

1. Turn on the projector and let it warm up for about 10 minutes.

2. Darken the room lights. You do not need to project an image from a video source to perform

this adjustment.

3. Press the

button on the remote control.

4. Use the

arrow buttons to highlight the

menu and select

Operation

You see this screen, which lets you correct each of the three RGB (red, green, blue) color

components:

5. Select

Vertical Stripe Adjustment R

Light part of

the screen

6. Look at the screen to determine where the vertical bands are more visible—in the light or dark

part of the screen. This is the part you should adjust first.

Note: The banding (if visible) appears within each bar or stripe on the screen.

Setting

LCD Panel Adjustment

. You see this screen:

menu, press

to select it, then open the

Bands

Table of Contents

Page 1 Epson PowerLite Cinema 500 Update ® Your projector includes an additional picture quality setting not described in your User’s Guide. If you notice faint vertical bands in the picture, you can eliminate them by following these steps: 1. Turn on the projector and let it warm up for about 10 minutes.
Page 2 10. Repeat steps 5 through 9 to adjust the green (G) and blue (B) color components. 11. When done, press the Menu Epson is a registered trademark of SEIKO EPSON CORPORATION. PowerLite is a registered trademark of Epson America, Inc. © 2005 Epson America, Inc. 3/05...