Page 1
3-866-383-11(2) Alphanumeric Pager Operating Instructions MODEL NO. MP-7001 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MP-7001 c1999 by Sony Corporation...
Page 2
Trade Name: SONY Model No.: MP-7001 Responsible Party: Sony Electronics Inc. Address: 1 Sony Drive, Park Ridge, NJ.07656 USA Telephone No.: 201-930-6970 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
Page 3
INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio...
IMPORTANT SAFETY PRECAUTIONS 1) Read Instructions - All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions - The safety and operating instructions should be retained for future reference. 3) Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
Page 5
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 8) Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazard.
Table of contents IMPORTANT SAFETY PRECAUTIONS ..4 Features ............8 Before operating the pager ....... 9 Getting Started Looking at your pager ......10 Pager ............10 Display ............11 Inserting the battery ........ 13 Turning the power on ......14 Setting the time and date ......
Page 7
Managing the message folders ....27 Reading a message in a folder ....27 Moving a message to another folder ..28 Deleting a message in a folder ....29 Memo Function Entering a memo ........30 Searching for a memo ......32 Editing a memo ........
– Do Not Disturb mode C 1999 Sony Corporation. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony and Jog Dial are trademarks of Sony. All other trademarks are the property of their respective owners. Design and...
Before operating the pager Congratulations on purchasing a Sony MP-7001 pager. These operating instructions explain how to use your new pager. Please keep this guide for future reference and enjoy learning about your new MP-7001! This pager has four main sections: Personal Messages, Information Service Messages, Folders and Memos.
Looking at your pager Pager Back Front 1 Display 2 POWER/ESC button This button turns the pager on or returns you to the previous display. 3 Jog Dial navigator Scroll to the desired display, select an item, or program your options. Operating the Jog Dial Press in : Selects the setting.
Display 3 4 5 !º !¡ !™ Out-of-service area indicator With this feature enabled, appears when the pager is out of the carrier service area. A message cannot be received when this icon is displayed. Lock indicator Appears when a locked Personal Message is displayed on the screen.
Page 12
6 Date/time/message number display Displays : • time or date while in standby. Press and hold POWER/ESC to display the date, instead of the time. • the message number while being read. • total number of memos stored. 7 AM/PM indicator Appears when the time is displayed in 12-hour mode.
Cautions • Turn off the pager when replacing a battery. • Sony does not take responsibility for lost memory contents while replacing a battery. • Insert a battery so the “+” and “–” on the battery line up with the “+”...
Turning the power on POWER/ESC Press POWER/ESC for more than two seconds. The pager sounds or vibrates, and the display appears as follows. The banner appears. You can change the banner. Use the Jog Dial! It's Fun and Easy! Approximate battery level appears : BATTERY INDICATOR Full Medium Low...
Setting the time and date While in the standby ---- ----- ---- MAIN MENU ----- display, press the Jog PERSONAL INBOX Dial in to go to the INFORMATION FUNCTION MENU MAIN MENU. Turn the Jog Dial, select FUNCTION MENU, then press in. ---- ----- -- FUNCTION...
Turn the Jog Dial, set the month, then press The cursor moves to the day. Turn and press the Jog Dial in to set the day, year, hour and minute by following the same process. If you set the 12-hour mode, be sure to select either AM or PM.
PLEASE PUSH ESCAPE previously set alert Message number (sound, vibration, or no alert). Please call me later. This is James To stop the sound or from Sony Corporation. vibration Press POWER/ESC or the Jog Dial. from Sony Corporation --PERSONAL To read a message...
Page 18
Note The Information Service alert mode is set to NO ALERT at the factory. You can set the pager so that it informs you of an incoming message. (Refer to page 37.)
Selecting a menu You can use the Jog Dial to read the contents of a message or to set up your options. While in the standby ---- ----- ---- MAIN MENU ----- display , press the Jog PERSONAL INBOX Dial in to go to the INFORMATION FUNCTION MENU MAIN MENU.
Reading a message To read a received message. Press in the Jog Dial while in standby mode. ---- ----- ---- MAIN MENU ----- Number of the PERSONAL INBOX INFORMATION unread messages FUNCTION MENU Turn the Jog Dial, select PERSONAL INBOX or INFORMATION INBOXES (the title of INBOXES appears), then press in.
Page 21
: Locked Please call me later. This is James from Sony Corporation. When “v”or “V” appear to the left of the display “v” : There are more lines of message below. Turn the Jog Dial downwards to continue.
Reading the next message You can skip to the next message while a message is displayed. While the message is Please call me displayed, press in the NEXT Jog Dial. LOCK FOLDER DELETE DELETE ALL Press the Jog Dial Can I have your again to select NEXT.
Locking and unlocking a message You can lock up to 20 Personal Messages to prevent erasing accidentally. Note that you cannot lock Information Service Messages. Open the message Please call me you want to lock, then NEXT LOCK FOLDER press the Jog Dial in. DELETE DELETE ALL Turn the Jog Dial,...
Deleting messages You can delete Personal Messages and Information Service Messages. The pager has two types of deleting : either deleting one message or deleting all messages at once. Deleting one message Open the message to Please call me be deleted, then press NEXT the Jog Dial in.
Deleting all messages You can delete all unlocked and read Personal Messages or all read Information Service Messages in the same INBOX. Open the message to be deleted then press in the Jog Dial. Turn the Jog Dial, Please call me select DELETE ALL, later.
Moving a message to a folder You can move messages into one of the four folders, which you can name at your convenience. (Refer to page 40.) Open the message to Please call me be moved, then press NEXT LOCK FOLDER in the Jog Dial.
Managing the message folders Reading a message in a folder While in the standby display, press the Jog Dial in to go to the MAIN MENU. T urn the Jog Dial, select the folder to open, then press in. Four messages are displayed. Message number Good Morning! Let' The first 18 characters...
Moving a message to another folder You can move messages into one of the three another folders, which you can name at your convenience. (Refer to page 40.) Open the message to Good Morning! Let's be moved, then press have the meeting at in the Jog Dial.
Deleting a message in a folder Open the message to Good Morning! Let's be deleted, then press have the meeting at in the Jog Dial. NEXT MOVE DELETE DELETE ALL T o delete the displayed message Good Morning! Let's have the meeting at only, tur n and pr ess in DELETE? YES /...
NEW, then press in. ABCDEFGHIJKLMNOPQ RSTUVWXYZ Character group Input area Turn the Jog Dial to SONY select a character from the character group, ABCDEFGHIJKLMNOPQ RSTUVWXYZ then press in. The selected character appears in the input area and the cursor shifts to the right.
Page 31
ABCDEFGHIJKLMNOPQ RSTUVWXYZ abcdefghijklmnopq rstuvwxyz 1234567890+-=*/#% $@<>()[]^ !?.:_',"& To : Select : change character groups >,. move the cursor to an entered character include a space delete an entered character insert a character , then a character save memo entry When MEMO MEMORY FULL appears This means the memory is full.
Searching for a memo In addition to scrolling through memos, you can SEARCH also search for an SONY Corporation Hotel individual memo. While in the FUNCTION MENU, turn the Jog Dial to select MEMO, then press in. Turn the Jog Dial, select SEARCH, then press in.
Editing a memo Open the memo to be My home edited, then press in TEL:123-4567 the Jog Dial. EDIT / DELETE Press the Jog Dial in My home to select EDIT . TEL:123-4567 ABCDEFGHIJKLMNOPQ RSTUVWXYZ Edit the memo. Refer to page 30 for details on character entry. When you have finished editing, turn the Jog Dial to select , then press in.
Setting alert notification You can select an alert of either sound (alert and melody) or vibration for all new messages. The same alert will be used for all new messages. While in the MAIN MENU, turn the Jog Dial, select FUNCTION MENU, then press Turn the Jog Dial, select SET ALERT...
Setting the alarm clock You can set the alarm clock to alert you at a specified time. At the same time, you can display a comment you have prepared in advance. Up to four alarm times can be set. While in the MAIN MENU, turn the Jog Dial, select FUNCTION MENU, then press Turn the Jog Dial, select ALARM CLOCK, then press in.
Page 36
Press the Jog Dial in 8:00AM ON MON-FRI after you have finished setting the ADD COMMENT? YES / alarm. Turn the Jog Dial, select YES to add a comment, then press in. Select NO if you do not want to add a comment.
Selecting an audible alert type The alarm clock, Personal Messages, and Information Service Messages can each have a different alert. While in the MAIN MENU, turn the Jog Dial, select FUNCTION MENU, then press Turn the Jog Dial, ALARM CLOCK select SELECT PERSONAL AUDIBLE ALERT,...
Setting the “Do Not Disturb” time While in the “Do Not Disturb” time, your pager will receive messages without activating the sound (alert and melody) or vibration during the set time frame. While in the MAIN MENU, turn the Jog Dial, select FUNCTION MENU, then press Turn the Jog Dial, DO NOT DISTURB...
Changing the banner You can change the banner that appears after the power is turned on and before the standby screen appears. The message can include up to two lines, 40 characters total. While in the MAIN MENU, turn the Jog Dial, select FUNCTION MENU, then press Turn the Jog Dial, select BANNER, then...
Changing an inbox or folder name An information inbox or folder can be personalized with a new name of up to 12 characters. While in the MAIN MENU, turn the Jog Dial, select FUNCTION MENU, then press INFORMATION Turn the Jog Dial, FOLDER 1 select INBOX OR FOLDER 2...
Changing the scroll mode You can change the screen scroll setting to either line-by-line or screen-by-screen while displaying messages only. While in the MAIN MENU, turn the Jog Dial, select FUNCTION MENU, then press Turn the Jog Dial, select SCROLL SCROLL MODE, then press in.
Adjusting the contrast The contrast of the display can be adjusted. While in the MAIN MENU display, turn the Jog Dial, select FUNCTION MENU, then press in. Turn the Jog Dial, select CONTRAST, CONTRAST then press in. Turn the Jog Dial to adjust the contrast of the display and press in.
Viewing the product information You can view the product information of this pager. While in the MAIN MENU display, turn the Jog Dial, select FUNCTION MENU, then press in. Turn the Jog Dial, select “ABOUT...”, VERSION XX.XX then press in. SERIAL No.XXXXXXXXXX The product information is displayed.
Troubleshooting Problem •Potential cause/m Solution The pager is not on. • Turn the pager on. Press the POWER/ESC button for more than two seconds. • The battery is not installed correctly. Check to see if the battery is correctly installed. •...
Page 45
The pager is not receiving messages. • The dialing party is entering an incorrect phone number or pin number. • The pager is outside the service area. Move to where the signal can be received. •The pager is not on. Turn the pager on.
Specifications Display 20 characters 4 lines Power requirements One 1.5V AA alkaline battery Dimensions (w/h/d) Approx. 3.31 1.89 0.69 in. Approx. 84 48 17.5 mm Weight Approx. 2.4 oz. Approx. 69 g (including battery) Design and specifications are subject to change without notice.